KSP-2G-F [MSYSTEM]

Plug-in Signal Conditioners K-UNIT;


型号：	KSP-2G-F
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners K-UNIT
文件：	总3页 (文件大小：98K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: KSP

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

Plug-in Signal Conditioners K-UNIT

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

LOW FREQUENCY TRANSMITTER

(50 Hz minimum, for Mitsubishi inverter)

Functions & Features

• Converting the pulse output from FM terminal of

Mitsubishi inverter into standard process signal

• Isolation up to 2000 V AC

[2] POWER INPUT

AC Power

• High-density mounting

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

Typical Applications

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

• Proximity switches

(1.97)

DC Power

S: 12 V DC

R: 24 V DC

(3.15)

GENERAL SPECIFICATIONS

Construction: Plug-in

123

(4.84)

Connection: M3.5 screw terminals

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Input pulse sensing: DC coupled standard

Input filter: CR filter incorporated

mm (inch)

MODEL: KSP-2[1]-[2]-ME

ORDERING INFORMATION

• Code number: KSP-2[1]-[2]-ME

Specify a code from below for each of [1] and [2].

(e.g. KSP-2A-B-ME)

(C = 3.3 nF, R = 10 kΩ; parallel connection)

Low-end cutout: 2 to 5 %

• Frequency range (e.g. 0 – 1440 Hz)

Applicable inverter:

Mitsubishi electric FREQROL series: A024, A200,

A500, A700, A800, D700, E500, E700, F400, F500, F700,

F700PJ, F800, S500, U100, B, B3

INPUT

2: Voltage pulse

Mitsubishi electric MELTRAC series: A100, A200,

V200

[1] OUTPUT

Current

Note) Do NOT connect other devices except the transmitter

to the inverter's FM terminal. Do NOT bundle the FM and

motor wirings.

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

INPUT SPECIFICATIONS

Frequency range: 0 – 50 Hz through 0 - 1440 Hz

Pulse width (time) requirement: ≥ 280 μsec. (Hi and Lo)

■ Voltage Pulse

Waveform: Square

Input amplitude: V

4 ±0.7 - 50 V, V 1 ± 0.7 V

Input impedance: ≥ 7 kΩ (for 9 V DC pulse)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

KSP SPECIFICATIONS

ES-3572-ME Rev.3 Page 1/3

http://www.m-system.co.jp/

MODEL: KSP

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; 5 mA for

negative voltage output; at ≥ 0.5 V

INSTALLATION

Power input

•AC: Operational voltage range: rating ±10 %,

50/60 ± 2 Hz, approx. 2.5 VA

•DC: Operational voltage range: rating ±10 %,

ripple 10% p-p max.; approx. 2.5 W (100 mA at 24 V)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 350 g (0.77 lb)

PERFORMANCE in percentage of span

Accuracy: ± 0.3 % (output 10 – 100 %)

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Response time: (0 – 90 %)

Approx. 2 sec. for 0 – 50 Hz

Approx. 1 sec. for 0 – 100 Hz

Approx. 0.5 sec. for 0 – 500 Hz

Approx. 0.5 sec. for 0 – 10 kHz

Ripple: 0.2 %p-p max. with input ≥ 10 %

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–

4.5 (.18) dia.

MTG HOLE

15 (.59) deep

8–

M3.5

SCREW

50 (1.97)

103 (4.06)

123 (4.84)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

KSP SPECIFICATIONS

ES-3572-ME Rev.3 Page 2/3

http://www.m-system.co.jp/

MODEL: KSP

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

10kΩ 3.3nF

Waveform

Shaper

Output

Driver

–

One-Shot

Integration

INPUT

OUTPUT

POWER

–

U(+)

V(–)

Base Socket

Note: Do NOT connect other devices except the transmitter to the inverter’s FM terminal.

Do NOT bundle the FM and motor wirings.

Specifications are subject to change without notice.

KSP SPECIFICATIONS

ES-3572-ME Rev.3 Page 3/3

http://www.m-system.co.jp/

相关型号：