KUREN-42P2 [MSYSTEM]
Plug-in Signal Conditioners K-UNIT;
| 型号： | KUREN-42P2 |
| 厂家： | 
M-SYSTEM |
| 描述： | Plug-in Signal Conditioners K-UNIT |
| 文件： | 总4页 (文件大小：137K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: KUREN
5: 220 V / 380 V / 1 A AC
6: 220 V / 380 V / 5 A AC
7: 110 V / 190 V / 1 A AC
8: 110 V / 190 V / 5 A AC
Plug-in Signal Conditioners K-UNIT
VAR TRANSDUCER
(for 3-phase / 4-wire, self-powered)
Functions & Features
[2] OUTPUT SIGNAL POLARITY
P: Negative in lag, positive in lead
• Providing a DC output signal in proportion to AC reactive
power
M: Negative in lead, positive in lag
• DC output containing little ripple is ideal for computer
input
• "Time division multiplication" method accepts distorted
waveforms
[3] OUTPUT
Current
• Isolation up to 2000 V AC
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
GW: -1 – +1 mA DC (Load resistance 10 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
• High-density mounting
• No auxiliary power source required
Typical Applications
• Centralized monitoring and control of power management
system in a manufacturing facility or building
72
(2.83)
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
1W: -10 – +10 mV DC (Load resistance 10 kΩ min.)
2W: -100 – +100 mV DC (Load resistance 100 kΩ min.)
3W: -1 – +1 V DC (Load resistance 1000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
80
(3.15)
132
(5.20)
mm (inch)
MODEL: KUREN–4[1][2][3][4]
ORDERING INFORMATION
• Code number: KUREN-4[1][2][3][4]
Specify a code from below for each of [1] through [4] .
(e.g. KUREN-41PA/Q)
[4] OPTIONS
blank: none
• Calibration range (e.g. lag 1000 – 0 – lead 1000 var)
• VT ratio, CT ratio (e.g. VT 3300 / 110 V, CT 250 / 5 A)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
CONFIGURATION
4: 3-phase / 4-wire
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
[1] INPUT (unbalanced load)
(Voltage must be balanced.)
1: 63.5 V / 110 V / 5 A AC
GENERAL SPECIFICATIONS
Construction: Plug-in
2: 63.5 V / 110 V / 1 A AC
Connection: M3.5 screw terminals
3: 127 V / 220 V / 1 A AC
Screw terminal: Chromated steel (standard) or stainless
4: 127 V / 220 V / 5 A AC
KUREN SPECIFICATIONS
ES-3652 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: KUREN
steel
Minimum span: 5 mV
Housing material: Flame-resistant resin (black)
Isolation: Voltage input to current input to output
Computation: Time division multiplication
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max. at ≥ 0.5 V
OPERATION DIAGRAM (example)
• Negative in lag, positive in lead
OUT
20mA
OUT
+10V
12
4
0
INPUT SPECIFICATIONS
Frequency: 50 or 60 Hz
-10V
1000
(Lag)
1000
(Lag)
0
1000var
(Lead)
0
1000var
(Lead)
• Voltage Input
Operational range: 85 – 110 % of rating
Overload capacity: 150 % of rating for 10 sec., 110 %
continuous
• Negative in lead, positive in lag
OUT
20mA
OUT
+10V
• Current Input
12
4
Operational range: 0 – 120 % of rating
Overload capacity: 1000 % of rating for 3 sec., 200 % for 10
sec., 120 % continuous
0
-10V
1000
(Lag)
0
1000var
(Lead)
1000
(Lag)
0
1000var
(Lead)
■ How To Determine Var Range
Calibration Range [var] = (Measuring Range) ÷
((VT Ratio) × (CT Ratio))
INSTALLATION
Check that the required calibration range is within the
available range in the table.
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 85 %RH (non-condensing)
Mounting: Surface or DIN rail
[example]
3-phase / 4-wire, measuring range 75 kvar,
VT 127 / 127 V, CT 250 / 5 A
Weight: 500 g (1.1 lb)
(75 × 10 [var]) ÷ ((127 ÷ 127) × (250 ÷ 5))= 1500 [var]
3
I INPUT RANGE
• 3-phase / 4-wire
PERFORMANCE in percentage of span
Accuracy: ±0.5 % (at 23°C ±10°C or 73.4°F ±18°F,
45 – 65 Hz)
BURDEN (VA)
VOLT. CURR.
INPUT
AVAILABLE
RANGE
STD.RANGE
Response time: ≤ 2 sec. (0 – 100 % ±1 %)
Ripple: 0.5 %p-p max.
0.1
/phase
110V
__
P1 – P2
: 2.5
P3
: 0.1
/1A
/5A
/1A
/5A
/1A
/5A
/1A
/5A
200 var
1000 var
350 var
100
500
175
875
200
1000
350
–
–
–
–
–
–
–
240 var
1200 var
420 var
2100 var
480 var
2400 var
840 var
√ 3
0.5
/phase
110V
__
√ 3
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(voltage input to current input to output to ground)
Impulse withstand voltage: 1.2 / 50 μsec., ±5 kV
(input to output or ground)
0.1
/phase
190V
__
√ 3
P1
: 2.5
P2, P3
: 0.2
0.5
/phase
190V
__
√ 3
1750 var
400 var
0.1
/phase
220V
__
√ 3
P1 – P2
: 2.5
P3
0.5
/phase
220V
__
√ 3
2000 var
700 var
: 0.3
380V
0.1
/phase
__
P1
√ 3
: 2.5
P2, P3
: 0.4
380V
__
√ 3
0.5
/phase
3500 var
1750 – 4200 var
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC and ± 1 mA
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 12 V max.
■ DC Voltage: -10 – +12 V DC
KUREN SPECIFICATIONS
ES-3652 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: KUREN
CONNECTION DIAGRAM
■ 3-PHASE/4-WIRE
SOURCE
2
N
1
3
VT
FUSE
U
V
u
v
P1
P2
P3
P0
6
3
5
8
10
+
–
OUTPUT
1
U
V
u
v
U
V
u
v
K
K
K
k
1S
1L
2S
2L
3S
3L
9
15
12
4
k
*
k
CT
l
l
l
L
L
L
*
11
2
*
LOAD
*CT Protector (model: CTM) attached to these terminals.
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
7
14
6
5
12
4
3
2
–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
8
9
15 10
1
11
2
14
–M3.5
SCREW
50 (1.97)
72 (2.83)
103 (4.06)
132 (5.20)
60 (2.36)
72 (2.83)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
KUREN SPECIFICATIONS
ES-3652 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: KUREN
TERMINAL ASSIGNMENTS unit: mm (inch)
CT PROTECTOR
(model: CTM)
7
14
6
5
12
4
3
8
9
15 10
1
11
2
CT PROTECTOR
(model: CTM)
Specifications are subject to change without notice.
KUREN SPECIFICATIONS
ES-3652 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明