KWLD-A6-H/Q [MSYSTEM]
Plug-in Signal Conditioners K-UNIT;
| 型号： | KWLD-A6-H/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Plug-in Signal Conditioners K-UNIT |
| 文件： | 总3页 (文件大小：110K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: KWLD
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
DC Power
S: 12 V DC
R: 24 V DC
Plug-in Signal Conditioners K-UNIT
CURRENT LOOP SUPPLY
(for level transmitter use)
Functions & Features
• Powering a 4 – 20 mA DC current loop
• Shortcircuit protection
• Applicable to smart transmitters
• Usable as 4 – 20 mA isolator
• Wide span adjustment range
• High-density mounting
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
50
(1.97)
/C02: Polyurethane coating
K•UNIT
80
/C03: Rubber coating
(3.15)
TERMINAL SCREW MATERIAL
/S01: Stainless steel
132
(5.20)
mm (inch)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M3.5 screw terminals
Screw terminal: Chromated steel (standard) or stainless
steel
MODEL: KWLD–A6–[1][2]
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +110 %
Zero adjustment: ±10 % of the input 4 – 20 mA (front)
Output 2 zero adjustment: ±2 % of the calibrated range
(front)
ORDERING INFORMATION
• Code number: KWLD-A6-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. KWLD-A6-B/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Span adjustment: 10 – 100 % of the input 4 – 20 mA (front)
Output 2 span adjustment: ±2 % of the calibrated range
(front)
INPUT
Current
Coarse span adjustment: Rotary switch (front)
Loop test switch: Supply output is removed with OFF.
4 – 20 mA DC (Input resistance 250 Ω)
OUTPUT 1
SUPPLY OUTPUT
Current
(Across the terminals 4 – 5)
Output voltage: 24 – 28 V DC with no load
18 V DC min. at 20 mA
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
OUTPUT 2
Voltage
Current limited: 30 mA max.
Protected time duration: No limit
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
[1] POWER INPUT
AC Power
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
B: 100 V AC
C: 110 V AC
D: 115 V AC
KWLD SPECIFICATIONS
ES-3597 Rev.4 Page 1/3
http://www.m-system.co.jp/
MODEL: KWLD
INSTALLATION
Power input
•AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 3.5 VA
•DC: Operational voltage range: rating ±10 %
ripple 10 %p-p max., approx. 3 W (125 mA at 24 V)
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 400 g (0.88 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 % (Coarse span adjustment SW set to ‘0’)
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) (Coarse span
adjustment SW set to ‘0’)
Response time: ≤ 0.2 sec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
2000 V AC @1 minute (input to output 1 or output 2 to
power to ground)
1000 V AC @1 minute (output 1 to output 2)
EXTERNAL VIEW
Loop Test SW
Coarse Span Adj.
Rotary SW
Span Adj.
Zero Adj.
Output 2
Span Adj.
Zero Adj.
KWLD SPECIFICATIONS
ES-3597 Rev.4 Page 2/3
http://www.m-system.co.jp/
MODEL: KWLD
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
8
7
6
5
4
2
–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
9
3
2
10 11
1
11
–M3.5
SCREW
50 (1.97)
103 (4.06)
132 (5.20)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
COARSE SPAN
ROTARY SW
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
+
1
2
+
–
5
6
4
3
9
INPUT
OUTPUT 1
250 Ω
2-WIRE XMTR
PWR SUPPLY
Z
S
24 V DC
Supply
Output
Driver
LOOP TEST
SW
10
11
7
+
OUTPUT 2
POWER
–
U(+)
V(–)
8
Base Socket
■ When Used as DC Supply
■ When Used as Isolator
2-WIRE
TRANSMITTER
–
+
–
+
5
6
4
+
–
+
5
6
4
250 Ω
INPUT
250 Ω
+
Specifications are subject to change without notice.
KWLD SPECIFICATIONS
ES-3597 Rev.4 Page 3/3
http://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明