KWVS-DCB-J/Q [MSYSTEM]

Plug-in Signal Conditioners K-UNIT;


型号：	KWVS-DCB-J/Q
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners K-UNIT
文件：	总4页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: KWVS

Z: Specify current (See INPUT SPECIFICATIONS)

Plug-in Signal Conditioners K-UNIT

Voltage

1: 0 – 10 mV DC (Input resistance 10 kΩ min.)

15: 0 – 50 mV DC (Input resistance 10 kΩ min.)

16: 0 – 60 mV DC (Input resistance 10 kΩ min.)

2: 0 – 100 mV DC (Input resistance 100 kΩ min.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

SIGNAL TRANSMITTER

(two isolated outputs)

Functions & Features

• Converting a DC input into two standard process signals

• Fast response type available

• High-density mounting

Typical Applications

• Isolation between control room and field instrumentation

(1.97)

[2] OUTPUT 1

Current

(3.15)

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

132

(5.20)

mm (inch)

MODEL: KWVS–[1][2][3]-[4][5]

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

ORDERING INFORMATION

• Code number: KWVS-[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. KWVS-6AA-B/K/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Note: When the user requires a current and a voltage

output, specify the current to be the Output 1 which allows

a greater load.

[3] OUTPUT 2

Current

[1] INPUT

A: 4 – 20 mA DC (Load resistance 350 Ω max.)

B: 2 – 10 mA DC (Load resistance 700 Ω max.)

C: 1 – 5 mA DC (Load resistance 1400 Ω max.)

D: 0 – 20 mA DC (Load resistance 350 Ω max.)

E: 0 – 16 mA DC(Load resistance 430 Ω max.)

F: 0 – 10 mA DC (Load resistance 700 Ω max.)

G: 0 – 1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

A1: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

J: 0 – 10 μA DC (Input resistance 1000 Ω)

K: 0 – 100 μA DC (Input resistance 1000 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Same range availability as Output 1

[4] POWER INPUT

AC Power

B: 100 V AC

KWVS SPECIFICATIONS

ES-3516 Rev.7 Page 1/4

http://www.m-system.co.jp/

MODEL: KWVS

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

DC Power

S: 12 V DC

R: 24 V DC

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 12 V max. for Output 1;

7 V max. for Output 2

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max. at ≥ 0.5 V

[5] OPTIONS (multiple selections)

Response Time (0 – 90 %)

INSTALLATION

Power input

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Other Options

•AC: Operational voltage range: rating ±10 %,

50/60 ±2 Hz, approx. 3 VA

blank: none

•DC: Operational voltage range: rating ±10 %

ripple 10 %p-p max., approx. 3 W (125 mA at 24 V)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Weight: 400 g (0.88 lb)

/C02: Polyurethane coating

/C03: Rubber coating

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

TERMINAL SCREW MATERIAL

/S01: Stainless steel

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute

(input to output to power to ground)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

1000 V AC @ 1 minute (output 1 to output 2)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Adjustable individually for each output 1 and output 2.

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

Minimum span: 3 mV

Offset: Max. 1.5 times span

Input resistance

Span 3 – 10 mV : ≥ 10 kΩ

Span 10 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

KWVS SPECIFICATIONS

ES-3516 Rev.7 Page 2/4

http://www.m-system.co.jp/

MODEL: KWVS

EXTERNAL DIMENSIONS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

–4.5 (.18) dia.

MTG HOLE

25 (.98) deep

10 11

–M3.5

SCREW

50 (1.97)

103 (4.06)

132 (5.20)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM)

10 11

Input shunt resistor attached

for current input.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

INPUT

OUTPUT 1

Output

Driver

10 +

11 –

OUTPUT 2

POWER

U(+)

V(–)

Base Socket

*Input shunt resistor attached for current input.

KWVS SPECIFICATIONS

ES-3516 Rev.7 Page 3/4

http://www.m-system.co.jp/

MODEL: KWVS

Specifications are subject to change without notice.

KWVS SPECIFICATIONS

ES-3516 Rev.7 Page 4/4

http://www.m-system.co.jp/

相关型号：