KYPD-A4A21R-R/Q [MSYSTEM]

Plug-in Signal Conditioners K-UNIT;


型号：	KYPD-A4A21R-R/Q
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners K-UNIT
文件：	总6页 (文件大小：137K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: KYPD

Plug-in Signal Conditioners K-UNIT

[3] OUTPUT

A1: Open collector (max. frequency 100 kHz)

A2: Open collector (max. frequency 10 Hz)

M1: 5 V pulse (max. frequency 100 kHz)

M2: 5 V pulse (max. frequency 10 Hz)

N1: 12 V pulse (max. frequency 100 kHz)

N2: 12 V pulse (max. frequency 10 Hz)

H: Relay contact (max. frequency 0.5 Hz)

PULSE ISOLATOR

(built-in excitation)

Functions & Features

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (relay, open collector and voltage pulses)

• Excitation

• Isolation up to 2000 V AC

• High-density mounting

[4] OUTPUT PULSE WIDTH

1: Equal to the input

2: One-shot output (≤ 30 ms; std. pulse width 5 ms)

(Specify when optional pulse width is required.)

(10 ms for relay contact pulse)

Typical Applications

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

3: One-shot output (≥ 30 ms; std. pulse width 50 ms)

(Specify when optional pulse width is required.)

(1.97)

[5] OUTPUT LOGIC

N: The same as the input

R: Inverted

(3.15)

[6] POWER INPUT

AC Power

123

(4.84)

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

mm (inch)

MODEL: KYPD–[1][2][3][4][5]–[6][7]

ORDERING INFORMATION

• Code number: KYPD-[1][2][3][4][5]-[6][7]

Specify a code from below for each of [1] through [7].

(e.g. KYPD-D4A23N-B/Q)

DC Power

S: 12 V DC

R: 24 V DC

• Frequency range (e.g. 0 – 5 Hz)

Use Ordering Information Sheet (No. ESU-1369) for pulse

width settings of DC voltage pulse input or one-shot output.

• Specify the specification for option code /Q

(e.g. /C01/S01)

[7] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

[1] INPUT

A: Dry contact

B: DC voltage pulse (Specify sensitivity)

C: 5 V pulse (sensitivity 2 V)

D: 12 V/24 V pulse (sensitivity 5 V)

H: Two-wire current pulse

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

[2] EXCITATION

1: 5 V DC / 80 mA

4: 12 V DC / 40 mA

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 1/6

http://www.m-system.co.jp/

MODEL: KYPD

■ Voltage pulse waveform

GENERAL SPECIFICATIONS

Construction: Plug-in

Volts

50V max.

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

Amplitude

Vinp-p

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Excitation adjustment: 5 – 12 V DC

Detecting level adjustments (DC voltage pulse): 2 – 10 V

Input pulse sensing: DC coupled

DC Offset

OUTPUT SPECIFICATIONS

■ Open Collector: 50 V DC @ 50 mA (resistive load)

Input filter: Provided with output code A2, M2, N2, H

(time constant approx. 1 msec.)

Maximum frequency:

Output code A1: 100 kHz with load resistance ≤ 1 kΩ

OUtput code A2: 10 Hz with load resistance ≤ 1 kΩ

Saturation voltage: 0.5 V DC

INPUT SPECIFICATIONS

Excitation: Shortcircuit protection; approx. 150 mA at

shortcircuit

■ Voltage Pulse: Rating (5 or 12 V) ± 10 %

Maximum frequency: 100 kHz

■ Dry Contact

Max. frequency: 100 kHz

Load resistance: 1.5 kΩ min. for 5 V, 3 kΩ min. for 12 V

L level: ≤ 0.5 V

Pulse width time requirement: 5 μsec. min. (10 ms

for output code A2, M2, N2, H)

Sensing: 10 V DC @ 2.5 mA

■ Relay Contact: 120 V AC or 30 V DC @ 200 mA

(resistive load)

ON/OFF level:

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 50 VA or 6 W

Minimum load: 5 V DC @ 10 mA

≥ 5.5 kΩ /5.5 V for OFF

≤ 1.8 kΩ /4.5 V for ON

■ Voltage Pulse: Specify DC offset and amplitude.

Max. frequency: 100 kHz

Maximum frequency: 0.5 Hz

Relay life:

Pulse width time requirement: 5 μsec. min. (10 ms

for output code A2, M2, N2, H)

Waveform: Square or sine

2 × 10

cycles (mechanical)

cycles (electrical)

7 × 10

Input impedance: 10 kΩ min.

Input amplitude: 2 – 50 Vp-p

Sensitivity adjustment (threshold level): 2 – 10 V

Max. voltage between input terminals: 50 V

• 5V, 12V, 24V Pulse

OUTPUT PULSE WIDTH

•Equal to the Input: No pulse width conversion

(difference between input and output within ±10 μsec.)

• One-shot Output: Constant pulse width

Output Frequency (Hz) = 500 / (Output Pulse Width (msec.))

Adjustable pulse width

Waveform: Square or sine

Input impedance: 10 kΩ min.

Detecting level

Pulse width max. 30 msec. (code 2):

1 – 30 msec. adjustable (standard 5 msec. ±20 %) for

'Output' code other than 'H'

INPUT 5 V PULSE 12 V / 24 V PULSE

≥ 2.25 V

≤ 1.75 V

≥ 5.25 V

≤ 4.75 V

10 – 30 msec. adjustable (standard 10 msec. ±20 %) for

'Output' code 'H'

■ Two-wire Current Pulse

Pulse width min. 30 msec. (code 3): 30 msec. – 1 sec.

adjustable (standard 50 msec. ±20 %)

Max. frequency: 100 kHz

Pulse width time requirement: 5 μsec. min. (10 ms

for output code A2, M2, N2, H)

Input resistance: Receiving resistor 220 Ω

Maximum current: ± 50 mA

Hi/Lo level: ≤ 5 mA for Lo, ≥ 15 mA for Hi

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 2/6

http://www.m-system.co.jp/

MODEL: KYPD

INSTALLATION

Power input

•AC: Operational voltage range: rating ±10 %,

50/60 ± 2 Hz, approx. 2.5 VA

•DC: Operational voltage range: rating ±10 %,

ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 400 g (0.88 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

EXTERNAL VIEW

Excitation Adj.

Sensitivity Adj.

Pulse Width Adj.

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 3/6

http://www.m-system.co.jp/

MODEL: KYPD

OUTPUT LOGIC

VOLTAGE PULSE or

INPUT WAVEFORM

DRY CONTACT

2-WIRE CURRENT PULSE

OFF

OUTPUT WAVEFORM

Voltage pulse

No pulse width conversion

OFF

Open collector

or relay contact

One-shot, detecting

input pulse rise

Voltage pulse

NON INVERTED

OFF

Open collector

or relay contact

One-shot, detecting

input pulse sink

Voltage pulse

OFF

Open collector

or relay contact

Voltage pulse

No pulse width conversion

OFF

Open collector

or relay contact

One-shot, detecting

input pulse rise

Voltage pulse

INVERTED

OFF

Open collector

or relay contact

One-shot, detecting

input pulse sink

Voltage pulse

OFF

Open collector

or relay contact

The pulse width in one-shot means the bold lined section of a pulse waveform.

Shades indicate default setting.

Input pulse rise/sink detected with voltage level

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 4/6

http://www.m-system.co.jp/

MODEL: KYPD

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–

4.5 (.18) dia.

MTG HOLE

15 (.59) deep

8–

M3.5

SCREW

50 (1.97)

103 (4.06)

123 (4.84)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SENSITIVITY

PULTH WIDTH

Isolation

Waveform

Shaper

Output

Driver

–

One-Shot *

OUTPUT

POWER

INPUT

–

SENSOR EXCITATION

Excitation

Supply

U(+)

V(–)

VOLTAGE ADJ.

Base Socket

*Provided only when the one-shot output is specified.

Input Connection Examples

Output Connection Examples

■ Open Collector

■

Dry Contact

■ 2-Wire Current Pulse

• Built-in Excitation

■ Voltage Pulse

+10V

4kΩ

220Ω

–

2-WIRE

PICK-UP

–

PWR

Vsns

■ Relay Contact

• AC Powered

■

Voltage Pulse

• External DC Supply

Relay or

Counter Coil

220Ω

Varistor or Spark

Quenching Circuit

10kΩ

–

LOAD

2-WIRE

PICK-UP

DC SUPPLY

• DC Powered

Vsns

–

PWR

Relay or

Counter Coil

Spark Quenching

Diode

LOAD

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 5/6

http://www.m-system.co.jp/

MODEL: KYPD

Specifications are subject to change without notice.

KYPD SPECIFICATIONS

ES-3576 Rev.13 Page 6/6

http://www.m-system.co.jp/

相关型号：