首页 |元器件品牌

M1EXR-2-P/Q [MSYSTEM]

2 Channel Super-mini Signal Conditioners with Display M1E-2 Series;
M1EXR-2-P/Q
型号： M1EXR-2-P/Q
厂家： M-SYSTEM    M-SYSTEM
描述：

2 Channel Super-mini Signal Conditioners with Display M1E-2 Series
文件： 总8页 (文件大小：280K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MODEL: M1EXR-2  
2 Channel Super-mini Signal Conditioners  
with Display M1E-2 Series  
OUTPUT – Field-selectable  
◆ DC Output  
• Current output: 0 - 20 mA DC  
• Voltage output: -5 - +5 V DC  
• Voltage output: -10 - +10 V DC  
RTD TRANSMITTER  
(2 channels, PC programmable)  
Functions & Features  
[1] POWER INPUT  
AC Power  
• Accepts direct input from a RTD and provides a linearized  
process signal  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,  
• Wide selection of RTD  
47 – 66 Hz)  
• 2 channels  
DC Power  
• Adjustments with the front buttons  
• Leadwire resistance compensation  
• OEL display with good visibility  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
P: 110 V DC  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
Typical Applications  
• Long distance transmission between the RTD and the  
transmitter  
[2] OPTIONS  
blank: none  
/Q: With options (specify the specification)  
36 (1.42)  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
99  
(3.90)  
/C02: Polyurethane coating  
/C03: Rubber coating  
EX-FACTORY SETTING  
/SET: Preset according to the Ordering Information Sheet  
(No. ESU-5984)  
125 (4.92)  
mm (inch)  
Note: The !gure shows the combination  
of the unit and the base.  
RELATED PRODUCTS  
• Installation base (model: M1E-BS2)  
• M1E configurator software (model: M1ECFG)  
Downloadable at M-System’s web site.  
MODEL: M1EXR-2–[1][2]  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual (EM-5981) for the M1E configurator for  
applicable cable types.  
ORDERING INFORMATION  
• Code number: M1EXR-2-[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. M1EXR-2-M2/Q)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
• Specify the specification for option code /Q  
(e.g. /C01/SET)  
Connection  
• Connected to base with connector  
• Base  
NO. OF CHANNELS  
2: 2 channels  
M2.6 screw terminals (torque: 0.5 N·m)  
Applicable solderless terminal size (M3)  
Screw terminal: Nickel-plated steel  
Housing material: Flame-resistant resin (black)  
Isolation: Ch1.input to ch2.input to Ch1.output to ch2.output  
to power  
INPUT – Field-selectable  
RTD  
JPt 100 (JIS'89), Pt 100 (JIS'89), Pt 100 (JIS'97, IEC),  
Pt 50Ω (JIS'81), Ni 508.4Ω, Pt 1000, Ni 100, Cu 10 @ 25℃  
Overrange output: Approx. -10 to +110 % (Not available for  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 1/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
current output not greater than 0 mA)  
OUTPUT SPECIFICATIONS  
Input zero fine adj. range: -10 to +10℃ (front button)  
Input span fine adj. range: -10 to +10℃ (front button)  
Output zero fine adj. range: -5 to +5% (front button)  
Output span fine adj. range: 95 to 105% (front button)  
Burnout protection: Upscale standard; downscale or no  
burnout optional by programming  
■ DC Current  
Output range: 0 – 20 mA DC  
Conformance range: 0 – 22mA DC  
Minimum span: 1 mA  
Load resistance: Output drive 15 V max.  
(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])  
(Not available to output less than 0 mA, output range may  
not be extended to -5 %)  
Configuration: Program with front buttons or Via PC.  
Programmable features include: Refer to the parameter list.  
Configurator connection: 2.5 dia. miniature jack;  
RS-232-C level  
■ DC Voltage  
Output range: -5 - +5 V DC, -10 - +10 V DC  
Conformance range: -6 - +6 V DC, -12 - +12 V DC  
Minimum span: 250 mV, 1 V  
■Recommended solderless terminal size - M3 (unit: mm)  
3max  
4min  
Load resistance: 200 kΩ min.  
3.2 dia.  
INSTALLATION  
Power Consumption  
12max  
•AC:  
(mm)  
≤ 7 VA at 100 V  
≤ 10 VA at 200 V  
≤ 12 VA at 264 V  
DISPLAY  
•DC: ≤ 4 W  
Display functions: Displays and sets measured range,  
Operating temperature: -5 to +55°C (23 to 131°F)  
Storage temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 10 to 85 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 120 g (0.26 lb) except base  
engineering unit  
Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”)  
Number of pixels: 68 × 95 (horizontal × vertical)  
Character color: Yellow  
Display life: Approx. 50000 hours  
(Expected time for the Display brightness to be reduced to  
50 % when the Display is used continuously with brightness  
setting 2 in 25 ℃)  
PERFORMANCE  
Accuracy: Input accuracy + output accuracy  
See CALCULATION EXAMPLES OF OVERALL ACCURACY.  
Inversely proportional to the setting span.  
Input accuracy: (whichever is greater)  
Table 1 accuracy value or ±0.1 % of FS  
Display accuracy:  
Display type: OEL display  
Display digit: Negative 5 digits, positive 6 digits (-99999 to  
999999)  
Decimal point position: None, number of decimal places 1 or  
2
Input display: Input accuracy ±1 digit  
Output display: Input accuracy + output accuracy ±1 digit  
Output accuracy: (% of max. output range)  
0 - 20 mA: ±0.06 %  
INPUT SPECIFICATIONS  
Input: 2- or 3-wire RTD  
Maximum leadwire resistance: 50 Ω per wire (For Cu 10, 20  
Ω per wire)  
-5 - +5 V: ±0.03 %  
-10 - +10 V: ±0.03 %  
Sensing current:  
Temp. coefficient (% of max. I/O range): ±0.015 %/°C  
(±0.008 %/°F)  
Pt 100, JPt 100, Pt 50 Ω, Ni 100, Cu 10: approx. 1.0 mA  
Pt 1000, Ni 508.4 Ω: approx. 0.2 mA  
Measurement rang: -5 to +105% of input setting value  
Refer to the operating manual (EM-5984-B) for changing  
input range, setting value.  
Response time (filter time constant: 0 sec.): ≤ 0.5 sec.  
(0 – 90 %)  
Burnout response: ≤ 10 sec.  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 1500 V AC @ 1 minute  
(Ch1 input to Ch2 input to Ch1 output to Ch2 output to  
power to ground)  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 2/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
CALCULATION EXAMPLES OF OVERALL ACCURACY  
[Example] Input Range Pt 100 (JIS'97, IEC), 0 – 100°C, Output Range 0 – 20 mA, Output Setting 4 – 20 mA  
■ Overall accuracy  
• Input Accuracy  
100 ℃ × 0.1 % = 0.1 ℃  
0.2 ℃ is higher thus 0.2 ℃ is selected  
0.2 ℃ ÷ 100 ℃ = 0.2 %  
• Output Accuracy = Output Range Span (20 mA) ÷ Output Span Setting (16 mA) × 0.06 % = 0.075 %  
Overall Accuracy = 0.2 + 0.075 = ±0.275 %  
[Table 1]  
°C  
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
-200.00 to +500.00  
-200.00 to +650.00  
-200.00 to +850.00  
-200.00 to +649.00  
-50.00 to +200.00  
-200.00 to +850.00  
-50.00 to +200.00  
-50.00 to +250.00  
ACCURACY  
JPt 100 (JIS’ 89)  
Pt 100 (JIS’ 89)  
Pt 100 (JIS’ 97, IEC)  
Pt 50 Ω (JIS’ 81)  
Ni 508.4 Ω  
20  
20  
20  
20  
20  
20  
20  
20  
0.5 ( 0.2°C, when set with the range of -200.00 to +200.00°C)  
0.5 ( 0.2°C, when set with the range of -200.00 to +200.00°C)  
0.5 ( 0.2°C, when set with the range of -200.00 to +200.00°C)  
0.8  
0.8  
Pt 1000  
0.8  
Ni 100  
0.8  
Cu 10 @ 25°C  
1.0  
°F  
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
-328.00 to +932.00  
-328.00 to+1202.00  
-328.00 to+1562.00  
-328.00 to+1200.20  
-58.00 to +392.00  
-328.00 to+1562.00  
-58.00 to +392.00  
-58.00 to +482.00  
ACCURACY  
JPt 100 (JIS’ 89)  
Pt 100 (JIS’ 89)  
Pt 100 (JIS’ 97, IEC)  
Pt 50 Ω (JIS’ 81)  
Ni 508.4 Ω  
36  
36  
36  
36  
36  
36  
36  
36  
0.90 ( 0.36°F, when set with the range of -328.00 to +392.00°F)  
0.90 ( 0.36°F, when set with the range of -328.00 to +392.00°F)  
0.90 ( 0.36°F, when set with the range of -328.00 to +392.00°F)  
1.44  
1.44  
Pt 1000  
1.44  
Ni 100  
1.44  
Cu 10 @ 25°C  
1.80  
K
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
73.15 to 773.15  
73.15 to 923.15  
73.15 to 1123.15  
73.15 to 922.15  
223.15 to 473.15  
73.15 to 1123.15  
223.15 to 473.15  
223.15 to 523.15  
ACCURACY  
JPt 100 (JIS’ 89)  
Pt 100 (JIS’ 89)  
Pt 100 (JIS’ 97, IEC)  
Pt 50 Ω (JIS’ 81)  
Ni 508.4 Ω  
20  
20  
20  
20  
20  
20  
20  
20  
0.5 ( 0.2K, when set with the range of 73.15 to 473.15K)  
0.5 ( 0.2K, when set with the range of 73.15 to 473.15K)  
0.5 ( 0.2K, when set with the range of 73.15 to 473.15K)  
0.8  
0.8  
0.8  
0.8  
1.0  
Pt 1000  
Ni 100  
Cu 10 @ 25°C  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
Low Voltage Directive  
EN 61010-1  
Installation Category II  
Pollution Degree 2  
Input or output to power: Reinforced insulation (300 V)  
RoHS Directive  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 3/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
EXTERNAL VIEW  
Display  
Up Button  
Down Button  
Set Button  
Mode Button  
Configurator Jack  
COMPONENT  
Display  
FUNCTION  
Indicates present values, setting values and abnormal information.  
Two types of present values are displayed respectively at the upper and lower parts according to setting.  
Mode button  
Set button  
Shifts from Measuring mode to each setting mode.  
The destination changes depending on how long the button is held down.  
Pressing Mode button for ≥ 2 seconds returns to Measuring mode from each setting mode..  
Shifts the setting value of each setting parameter item to a setting changeable state.  
When at setting changeable state, used to move through the digits of setting value and to enter (save) the  
setting value.  
Up button  
Shifts through setting parameter items and to increase or select the setting value.  
Shifts through setting parameter items and to decrease or select the setting value.  
Down button  
Con€gurator Jack  
Used to perform con€guration with M1E con€gurator software (model: M1ECFG).  
When using the software, set the Lockout setting of the unit to ‘Lock’.  
Refer to the operating manual (EM-5984-B) for detailed procedures.  
TERMINAL ASSIGNMENTS  
No.  
1
FUNCTION  
No.  
11  
FUNCTION  
Ch1 Output +  
Ch1 Output –  
Unused  
1
6
2
7
3
8
4
9
5
Unused  
2
Unused  
12  
13  
14  
15  
16  
17  
18  
19  
20  
10  
3
Ch1 Input A  
Ch1 Input B (3-wire)  
Ch1 Input B  
Unused  
4
Ch2 Output +  
Ch2 Output –  
Unused  
5
6
7
Unused  
Unused  
8
Ch2 Input A  
Ch2 Input B (3-wire)  
Ch2 Input B  
Unused  
9
Power U (+)  
Power V (–)  
10  
11  
16  
12  
17  
13  
18  
14  
19  
15  
20  
* Base does not come with the unit. Please order separately.  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 4/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
PARAMETER LIST  
It is available to congure or conrm settings shown below by using front button. Conguring or conrming with PC is  
available when using M1E congurator software (model: M1ECFG).  
MODE  
ITEM SETTING PARAMETER  
RANGE  
UNIT INITIAL VALUE  
Ch1 setting  
01  
09  
11  
Lockout setting  
Lock / Unlock  
°C / °F / K  
—
—
—
Lock  
Ch1 Temperature unit  
Ch1 Input range  
°C  
JPt 100 (JIS ’89)  
Pt 100 (JIS ’89)  
Pt 100 (JIS ’97, IEC)  
Pt 50 Ω (JIS ’81)  
Ni 508.4 Ω  
Pt 100 (JIS ’97, IEC)  
Pt 1000  
Ni 100  
Cu 10 @ 25°C  
12  
Ch1 0 % input setting  
JPt 100 (JIS ’89) : -200.00 – 480.00  
Pt 100 (JIS ’89) : -200.00 – 630.00  
Pt 100 (JIS ’97, IEC) : -200.00 – 830.00  
Pt 50 Ω (JIS ’81) : -200.00 – 629.00  
Ni 508.4 Ω : -50.00 – 180.00  
°C  
0.0  
Pt 1000 : -200.00 – 830.00  
Ni 100 : -50.00 – 180.00  
Cu 10 @ 25°C : -50.00 – 230.00  
13  
Ch1 100 % input setting  
JPt 100 (JIS ’89) : -180.00 – 500.00  
Pt 100 (JIS ’89) : -180.00 – 650.00  
Pt 100 (JIS ’97, IEC) : -180.00 – 850.00  
Pt 50 Ω (JIS ’81) : -180.00 – 649.00  
Ni 508.4 Ω : -30.00 – 200.00  
°C  
100.0  
Pt 1000 : -180.00 – 850.00  
Ni 100 : -30.00 – 200.00  
Cu 10 @ 25°C : -30.00 – 250.00  
16  
18  
Ch1 Input decimal point  
Ch1 Output range  
No decimal point  
The number of decimal places : 1 or 2  
—
—
1 place of decimals  
0 – 20 mA  
0 – 20 mA  
-5 – +5 V  
-10 – +10 V  
19  
20  
Ch1 0 % output setting  
0.000 – 19.000  
-5.000 – 4.750  
-10.000 – 9.000  
mA  
V
4.000  
V
Ch1 100 % output setting  
1.000 – 20.000  
-4.750 – 5.000  
-9.000 – 10.000  
mA  
V
20.000  
V
74  
75  
76  
79  
80  
81  
82  
83  
89  
Ch1 Burnout  
None / Down / Up  
2 Wires / 3 Wires  
0.000 – 50.000*  
0 – 30  
—
—
Up  
Ch1 Sensor wires  
3 Wires  
0.000  
0
Ch1 Wire resistance  
Ch1 Filter time constant  
Ch1 Input zero ne adjust  
Ch1 Input span ne adjust  
Ch1 Output zero ne adjust  
Ω
Sec.  
°C  
°C  
%
-10.00 – 10.00*  
-10.00 – 10.00*  
-5.000 – 5.000  
0.00  
0.00  
0.000  
100.000  
Cancel  
Ch1 Output span ne adjust 95.000 – 105.000  
%
Ch1 Loop test  
-10.00 – 110.00  
%
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 5/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
MODE  
ITEM SETTING PARAMETER  
109 Ch2 Temperature unit  
111 Ch2 Input range  
RANGE  
UNIT INITIAL VALUE  
Ch2 setting  
°C / °F / K  
—
—
°C  
JPt 100 (JIS ’89)  
Pt 100 (JIS ’89)  
Pt 100 (JIS ’97, IEC)  
Pt 50 Ω (JIS ’81)  
Ni 508.4 Ω  
Pt 100 (JIS ’97, IEC)  
Pt 1000  
Ni 100  
Cu 10 @ 25°C  
112 Ch2 0 % input setting  
JPt 100 (JIS ’89) : -200.00 – 480.00  
Pt 100 (JIS ’89) : -200.00 – 630.00  
Pt 100 (JIS ’97, IEC) : -200.00 – 830.00  
Pt 50 Ω (JIS ’81) : -200.00 – 629.00  
Ni 508.4 Ω : -50.00 – 180.00  
°C  
0.0  
Pt 1000 : -200.00 – 830.00  
Ni 100 : -50.00 – 180.00  
Cu 10 @ 25°C : -50.00 – 230.00  
113 Ch2 100 % input setting  
JPt 100 (JIS ’89) : -180.00 – 500.00  
Pt 100 (JIS ’89) : -180.00 – 650.00  
Pt 100 (JIS ’97, IEC) : -180.00 – 850.00  
Pt 50 Ω (JIS ’81) : -180.00 – 649.00  
Ni 508.4 Ω : -30.00 – 200.00  
°C  
100.0  
Pt 1000 : -180.00 – 850.00  
Ni 100 : -30.00 – 200.00  
Cu 10 @ 25°C : -30.00 – 250.00  
116 Ch2 Input decimal point  
118 Ch2 Output range  
No decimal point  
The number of decimal places : 1 or 2  
—
—
1 place of decimals  
0 – 20 mA  
0 – 20 mA  
-5 – +5 V  
-10 – +10 V  
119 Ch2 0 % output setting  
120 Ch2 100 % output setting  
0.000 – 19.000  
-5.000 – 4.750  
-10.000 – 9.000  
mA  
V
4.000  
V
1.000 – 20.000  
-4.750 – 5.000  
-9.000 – 10.000  
mA  
V
20.000  
V
174 Ch2 Burnout  
None / Down / Up  
2 Wires / 3 Wires  
0.000 – 50.000*  
0 – 30  
—
—
Up  
175 Ch2 Sensor wires  
3 Wires  
0.000  
0
176 Ch2 Wire resistance  
179 Ch2 Filter time constant  
180 Ch2 Input zero "ne adjust  
181 Ch2 Input span "ne adjust  
182 Ch2 Output zero "ne adjust  
Ω
Sec.  
°C  
°C  
%
-10.00 – 10.00*  
-10.00 – 10.00*  
-5.000 – 5.000  
0.00  
0.00  
0.000  
100.000  
Cancel  
Lock  
183 Ch2 Output span "ne adjust 95.000 – 105.000  
%
189 Ch2 Loop test  
01 Lockout setting  
-10.00 – 110.00  
Lock / Unlock  
%
—
Advanced  
201 Display setting  
Upper: choose from 8 types*  
Lower: choose from 9 types*  
—
Upper: Ch1 INPUT  
Lower: Ch2 INPUT  
202 Channel enable  
Choose from 3 types*  
—
Ch1 enable  
Ch2 enable  
203 Brightness  
1 (darkest) – 4 (brightest)  
0 (always on), 1 – 60  
OFF / RESET  
—
—
min.  
—
4
204 Display timeout  
205 Reset all settings  
206 Version indication  
10  
OFF  
—
—
01  
Lockout setting  
Lock / Unlock  
—
Lock  
* For detailed types, refer to the operating manual (EM-5984-B).  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 6/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]  
125 (4.92)  
[4 (.16)]  
45 (1.77)  
36 (1.42)  
1
6
2
7
3
8
4
9
5
10  
DIN RAIL  
35mm wide  
11 12 13 14 15  
16  
18 19 20  
17  
* Base does not come with the unit.  
Please order separately.  
MOUNTING REQUIREMENTS unit: mm [inch]  
2–M4 SCREW  
* Mounting requirements for base.  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 7/8  
https://www.m-system.co.jp/  
MODEL: M1EXR-2  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
CH1 RTD  
2-wire  
A
3-wire  
A
3
4
5
Isolation  
Isolation  
Isolation  
Low Drift  
Amplifie  
& Burnout  
Output  
Driver  
B
B
+
–
11  
12  
CH1 OUTPUT  
B
Digital  
Computation  
Circuit  
CH2 RTD  
Isolation  
2-wire  
A
3-wire  
A
Output  
Driver  
+
–
14  
15  
8
9
CH2 OUTPUT  
POWER  
Low Drift  
Amplifie  
& Burnout  
B
B
10  
B
(+)  
19  
20  
U
Display  
Circuit  
(–)  
V
CONFIGURATOR  
JACK  
Front  
Button  
13  
16  
17  
18  
1
2
6
7
Base  
Specifications are subject to change without notice.  
M1EXR-2 SPECIFICATIONS  
ES-5984 Rev.2 Page 8/8  
https://www.m-system.co.jp/  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明