首页 |元器件品牌

M1EXT-2-M2 [MSYSTEM]

2 Channel Super-mini Signal Conditioners with Display M1E-2 Series;
M1EXT-2-M2
型号： M1EXT-2-M2
厂家： M-SYSTEM    M-SYSTEM
描述：

2 Channel Super-mini Signal Conditioners with Display M1E-2 Series
文件： 总9页 (文件大小：334K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MODEL: M1EXT-2  
N, U, L, P (Platinel II)  
2 Channel Super-mini Signal Conditioners  
with Display M1E-2 Series  
OUTPUT – Field-selectable  
◆ DC Output  
THERMOCOUPLE TRANSMITTER  
(2 channels, PC programmable)  
Functions & Features  
• Current output: 0 - 20 mA DC  
• Voltage output: -5 - +5 V DC  
• Voltage output: -10 - +10 V DC  
• Accepts direct input from a thermocouple and provides a  
linearized process signal  
• Wide selection of thermocouples  
• 2 channels  
[1] POWER INPUT  
AC Power  
• Adjustments with the front button  
• OEL display with good visibility  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,  
47 – 66 Hz)  
DC Power  
Typical Applications  
R: 24 V DC  
• Small burnout sensing current enables long distance  
transmission with minimum offset drifts  
• Electric furnace (isolation)  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
P: 110 V DC  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
• No burnout type can connect to a single T/C in parallel  
with a recorder  
[2] OPTIONS  
blank: none  
/Q: With options (specify the specification)  
36 (1.42)  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
99  
(3.90)  
/C02: Polyurethane coating  
/C03: Rubber coating  
EX-FACTORY SETTING  
mm (inch)  
125 (4.92)  
/SET: Preset according to the Ordering Information Sheet  
(No. ESU-5985)  
Note: The gure shows the combination  
of the unit and the base.  
RELATED PRODUCTS  
• Installation base (model: M1E-BS2)  
• M1E configurator software (model: M1ECFG)  
Downloadable at M-System’s web site.  
MODEL: M1EXT-2–[1][2]  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual (EM-5981) for the M1E configurator for  
applicable cable types.  
ORDERING INFORMATION  
• Code number: M1EXT-2-[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. M1EXT-2-M2/Q)  
• Specify the specification for option code /Q  
(e.g. /C01/SET)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
Connection  
• Connected to base with connector  
• Base  
NO. OF CHANNELS  
2: 2 channels  
M2.6 screw terminals (torque: 0.5 N·m)  
Applicable solderless terminal size (M3)  
Screw terminal: Nickel-plated steel  
Housing material: Flame-resistant resin (black)  
Isolation: Ch1.input to ch2.input to Ch1.output to ch2.output  
INPUT – Field-selectable  
Thermocouple  
(PR), K (CA), E (CRC), J (IC), T (CC), B (RH), R, S, C (WRe 5-26),  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 1/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
to power  
OUTPUT SPECIFICATIONS  
■ DC Current  
Overrange output: Approx. -10 to +110 % (Not available for  
current output not greater than 0 mA)  
Output range: 0 – 20 mA DC  
Input zero fine adj. range: -10 to +10℃ (front button)  
Input span fine adj. range: -10 to +10℃ (front button)  
Output zero fine adj. range: -5 to +5% (front button)  
Output span fine adj. range: 95 to 105% (front button)  
Burnout protection: Upscale standard; downscale or no  
burnout optional by programming  
Conformance range: 0 – 22mA DC  
Minimum span: 1 mA  
Load resistance: Output drive 15 V max.  
(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])  
(Not available to output less than 0 mA, output range may  
not be extended to -5 %)  
(Set to "None" at item [74] Burnout, when the unit is  
connected with another instrument in parallel.)  
Cold junction compensation: CJC sensor attached to the  
input terminals  
■ DC Voltage  
Output range: -5 - +5 V DC, -10 - +10 V DC  
Conformance range: -6 - +6 V DC, -12 - +12 V DC  
Minimum span: 250 mV, 1 V  
Configuration: Program with front buttons or Via PC.  
Programmable features include: Refer to the parameter list.  
Configurator connection: 2.5 dia. miniature jack;  
RS-232-C level  
Load resistance: 200 kΩ min.  
INSTALLATION  
Power Consumption  
■Recommended solderless terminal size - M3 (unit: mm)  
•AC:  
3max  
4min  
≤ 7 VA at 100 V  
3.2 dia.  
≤ 10 VA at 200 V  
≤ 12 VA at 264 V  
•DC: ≤ 4 W  
Operating temperature: -5 to +55°C (23 to 131°F)  
Storage temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 10 to 85 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Weight: 120 g (0.26 lb) except base  
12max  
(mm)  
DISPLAY  
Display functions: Displays and sets measured range,  
engineering unit  
PERFORMANCE  
Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”)  
Number of pixels: 68 × 95 (horizontal × vertical)  
Character color: Yellow  
Accuracy: Input accuracy + output accuracy  
See CALCULATION EXAMPLES OF OVERALL ACCURACY.  
Inversely proportional to the setting span.  
Input accuracy: [Table 1 Accuracy value + Cold Junction  
Compensation Error 0.5°C (0.9°F)]  
Display accuracy:  
Display life: Approx. 50000 hours  
(Expected time for the Display brightness to be reduced to  
50 % when the Display is used continuously with brightness  
setting 2 in 25 ℃)  
Input display: Input accuracy ±1 digit  
Output display: Input accuracy + output accuracy ±1 digit  
Output accuracy: (% of max. output range)  
0 - 20 mA: ±0.06 %  
Display type: OEL display  
Display digit: Negative 5 digits, positive 6 digits (-99999 to  
999999)  
Decimal point position: None, number of decimal places 1 or  
2
-5 - +5 V: ±0.03 %  
-10 - +10 V: ±0.03 %  
Cold junction compensation error:  
±0.5°C at 25 ±10°C  
INPUT SPECIFICATIONS  
Input resistance: 1 MΩ min.  
±0.9°F at 77 ±18°F  
(The described accuracy may be partially not  
satisfied when the input temperature is below 0°C. Consult  
factory.)  
Burnout sensing: ≤ 0.2 μA  
Measurement rang: -5 to +105% of input setting value  
Refer to the operating manual (EM-5985-B) for changing  
input range, setting value.  
Temp. coefficient (% of max. I/O range): ±0.015 %/°C  
(±0.008 %/°F)  
Response time (filter time constant: 0 sec.): ≤ 0.5 sec.  
(0 – 90 %)  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 2/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
Burnout response: ≤ 10 sec.  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 1500 V AC @ 1 minute  
(Ch1 input to Ch2 input to Ch1 output to Ch2 output to  
power to ground)  
CALCULATION EXAMPLES OF OVERALL ACCURACY  
[Example] Input Range K thermocouple, 0 – 1000°C, Output Range 0 – 20 mA, Output Setting 4 – 20 mA  
■ Overall accuracy  
• Input Accuracy  
1) Absolute value accuracy (Table 1): 1.00°C  
2) CJC error (0.5°C) added: 1.50°C  
3) 1.50°C ÷ 1000°C × 100 = 0.15 %  
• Output Accuracy = Output Range Span (20 mA) ÷ Output Span Setting (16 mA) × 0.06 % = 0.075 %  
Overall Accuracy = 0.15 + 0.075 = ±(0.225 % of span)  
[Table 1]  
°C  
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
to 1760  
ACCURACY CONFORMANCE RANGE  
(PR)  
K (CA)  
E (CRC)  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
0
2ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
2ꢀ00  
2ꢀ00  
2ꢀ00  
2ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
0 to 1760  
-150 to +1370  
-170 to +1000  
-180 to +1200  
-170 to +400  
400 to 1760  
200 to 1760  
0 to 1760  
-270 to +1370  
-270 to +1000  
-210 to +1200  
-270 to +400  
J
(IC)  
T
(CC)  
B (RH)  
0 to 1820  
R
-50 to +1760  
-50 to +1760  
S
C (WRe 5-26)  
0
to 2315  
0 to 2315  
N
-270 to +1300  
-200 to +600  
-200 to +900  
-130 to +1300  
-200 to +600  
-200 to +900  
0 to 1395  
U
L
P (Platinel II)  
0 to 1395  
°F  
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
32 to 3200  
ACCURACY CONFORMANCE RANGE  
(PR)  
K (CA)  
E (CRC)  
36  
36  
36  
36  
36  
36  
36  
36  
36  
36  
36  
36  
36  
3ꢀ60  
1ꢀ80  
1ꢀ80  
1ꢀ80  
1ꢀ80  
3ꢀ60  
3ꢀ60  
3ꢀ60  
3ꢀ60  
1ꢀ80  
1ꢀ80  
1ꢀ80  
1ꢀ80  
32 to 3200  
-238 to +2498  
-274 to +1832  
-292 to +2192  
-274 to +752  
752 to 3200  
392 to 3200  
32 to 3200  
-454 to +2498  
-454 to +1832  
-346 to +2192  
-454 to +752  
32 to 3308  
J
(IC)  
T
(CC)  
B (RH)  
R
-58 to +3200  
-58 to +3200  
32 to 4199  
S
C (WRe 5-26)  
32 to 4199  
N
-454 to +2372  
-328 to +1112  
-328 to +1652  
32 to 2543  
-202 to +2372  
-328 to +1112  
-328 to +1652  
32 to 2543  
U
L
P (Platinel II)  
K
INPUT RANGE  
MINIMUM SPAN  
SETTING RANGE  
273ꢀ15 to 2033ꢀ15  
3ꢀ15 to 1643ꢀ15  
3ꢀ15 to 1273ꢀ15  
63ꢀ15 to 1473ꢀ15  
3ꢀ15 to 673ꢀ15  
273ꢀ15 to 2093ꢀ15  
223ꢀ15 to 2033ꢀ15  
223ꢀ15 to 2033ꢀ15  
273ꢀ15 to 2588ꢀ15  
3ꢀ15 to 1573ꢀ15  
73ꢀ15 to 873ꢀ15  
73ꢀ15 to 1173ꢀ15  
273ꢀ15 to 1668ꢀ15  
ACCURACY CONFORMANCE RANGE  
(PR)  
K (CA)  
E (CRC)  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
2ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
2ꢀ00  
2ꢀ00  
2ꢀ00  
2ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
1ꢀ00  
273ꢀ15 to 2033ꢀ15  
123ꢀ15 to 1643ꢀ15  
103ꢀ15 to 1273ꢀ15  
93ꢀ15 to 1473ꢀ15  
103ꢀ15 to 673ꢀ15  
673ꢀ15 to 2033ꢀ15  
473ꢀ15 to 2033ꢀ15  
273ꢀ15 to 2033ꢀ15  
273ꢀ15 to 2588ꢀ15  
143ꢀ15 to 1573ꢀ15  
73ꢀ15 to 873ꢀ15  
73ꢀ15 to 1173ꢀ15  
273ꢀ15 to 1668ꢀ15  
J
(IC)  
T
(CC)  
B (RH)  
R
S
C (WRe 5-26)  
N
U
L
P (Platinel II)  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 3/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
Low Voltage Directive  
EN 61010-1  
Installation Category II  
Pollution Degree 2  
Input or output to power: Reinforced insulation (300 V)  
RoHS Directive  
EXTERNAL VIEW  
Display  
Up Button  
Down Button  
Set Button  
Mode Button  
Configurator Jack  
COMPONENT  
Display  
FUNCTION  
Indicates present values, setting values and abnormal information.  
Two types of present values are displayed respectively at the upper and lower parts according to setting.  
Mode button  
Set button  
Shifts from Measuring mode to each setting mode.  
The destination changes depending on how long the button is held down.  
Pressing Mode button for ≥ 2 seconds returns to Measuring mode from each setting mode..  
Shifts the setting value of each setting parameter item to a setting changeable state.  
When at setting changeable state, used to move through the digits of setting value and to enter (save) the  
setting value.  
Up button  
Shifts through setting parameter items and to increase or select the setting value.  
Shifts through setting parameter items and to decrease or select the setting value.  
Down button  
Con€gurator Jack  
Used to perform con€guration with M1E con€gurator software (model: M1ECFG).  
When using the software, set the Lockout setting of the unit to ‘Lock’.  
Refer to the operating manual (EM-5985-B) for detailed procedures.  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 4/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
TERMINAL ASSIGNMENTS  
No.  
1
FUNCTION  
Unused  
No.  
11  
FUNCTION  
Ch1 Output +  
Ch1 Output –  
Unused  
1
6
2
7
3
8
4
9
5
2
Unused  
12  
13  
14  
15  
16  
17  
18  
19  
20  
10  
3
Ch1 T/C +  
Ch1 COM  
Ch1 CJC Sensor  
Unused  
4
Ch2 Output +  
Ch2 Output –  
Unused  
5
6
7
Unused  
Unused  
8
Ch2 T/C +  
Ch2 COM  
Ch2 CJC Sensor  
Unused  
9
Power U (+)  
Power V (–)  
10  
11  
16  
12  
17  
13  
18  
14  
19  
15  
20  
* Base does not come with the unit. Please order separately.  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 5/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
PARAMETER LIST  
It is available to configure or confirm settings shown below by using front button. Configuring or confirming with PC is  
available when using M1E configurator software (model: M1ECFG).  
MODE  
ITEM SETTING PARAMETER  
RANGE  
UNIT INITIAL VALUE  
Ch1 setting  
01  
09  
11  
Lockout setting  
Lock / Unlock  
°C / °F / K  
—
—
—
Lock  
°C  
Ch1 Temperature unit  
Ch1 Input range  
(PR)  
K (CA)  
K (CA)  
E (CRC)  
J (IC)  
T (CC)  
B (RH)  
R
S
C (WRe 5-26)  
N
U
L
P (Platinel II)  
12  
Ch1 0 % input setting  
(PR) : 0.0 – 1740.0  
°C  
0.0  
K (CA) : -270.0 – 1350.0  
E (CRC) : -270.0 – 980.0  
J (IC) : -210.0 – 1180.0  
T (CC) : -270.0 – 380.0  
B (RH) : 0.0 – 1800.0  
R : -50.0 – 1740.0  
S : -50.0 – 1740.0  
C (Wre 5-26) : 0.0 – 2295.0  
N : -270.0 – 1280.0  
U : -200.0 – 580.0  
L : -200.0 – 880.0  
P (Platinel II) : 0.0 – 1375.0  
13  
Ch1 100 % input setting  
(PR) : 20.0 – 1760.0  
K (CA) : -250.0 – 1370.0  
E (CRC) : -250.0 – 1000.0  
J (IC) : -190.0 – 1200.0  
T (CC) : -250.0 – 400.0  
B (RH) : 20.0 – 1820.0  
R : -30.0 – 1760.0  
°C  
1000.0  
S : -30.0 – 1760.0  
C (Wre 5-26) : 20.0 – 2315.0  
N : -250.0 – 1300.0  
U : -180.0 – 600.0  
L : -180.0 – 900.0  
P (Platinel II) : 20.0 – 1395.0  
16  
18  
Ch1 Input decimal point  
Ch1 Output range  
No decimal point  
The number of decimal places : 1 or 2  
—
—
1 place of decimals  
0 – 20 mA  
0 – 20 mA  
-5 – +5 V  
-10 – +10 V  
19  
20  
Ch1 0 % output setting  
0.000 – 19.000  
-5.000 – 4.750  
-10.000 – 9.000  
mA  
V
4.000  
V
Ch1 100 % output setting  
1.000 – 20.000  
-4.750 – 5.000  
-9.000 – 10.000  
mA  
V
20.000  
V
74  
77  
78  
79  
80  
81  
82  
83  
89  
Ch1 Burnout  
None / Down / Up  
CJM / FXD TEMP  
—
—
Up  
Ch1 Cold junction compensation  
CJM  
0.00  
0
Ch1 Preset "xed terminal temperature -50.00 – 100.00*  
°C  
Sec.  
°C  
°C  
%
Ch1 Filter time constant  
Ch1 Input zero "ne adjust  
Ch1 Input span "ne adjust  
Ch1 Output zero "ne adjust  
Ch1 Output span "ne adjust  
Ch1 Loop test  
0 – 30  
-10.00 – 10.00*  
-10.00 – 10.00*  
-5.000 – 5.000  
95.000 – 105.000  
-10.00 – 110.00  
0.00  
0.00  
0.000  
100.000  
Cancel  
%
%
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 6/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
MODE  
ITEM SETTING PARAMETER  
109 Ch2 Temperature unit  
111 Ch2 Input range  
RANGE  
UNIT INITIAL VALUE  
Ch2 setting  
°C / °F / K  
—
—
°C  
K (CA)  
(PR)  
K (CA)  
E (CRC)  
J (IC)  
T (CC)  
B (RH)  
R
S
C (WRe 5-26)  
N
U
L
P (Platinel II)  
112 Ch2 0 % input setting  
(PR) : 0.0 – 1740.0  
°C  
0.0  
K (CA) : -270.0 – 1350.0  
E (CRC) : -270.0 – 980.0  
J (IC) : -210.0 – 1180.0  
T (CC) : -270.0 – 380.0  
B (RH) : 0.0 – 1800.0  
R : -50.0 – 1740.0  
S : -50.0 – 1740.0  
C (Wre 5-26) : 0.0 – 2295.0  
N : -270.0 – 1280.0  
U : -200.0 – 580.0  
L : -200.0 – 880.0  
P (Platinel II) : 0.0 – 1375.0  
113 Ch2 100 % input setting  
(PR) : 20.0 – 1760.0  
K (CA) : -250.0 – 1370.0  
E (CRC) : -250.0 – 1000.0  
J (IC) : -190.0 – 1200.0  
T (CC) : -250.0 – 400.0  
B (RH) : 20.0 – 1820.0  
R : -30.0 – 1760.0  
°C  
1000.0  
S : -30.0 – 1760.0  
C (Wre 5-26) : 20.0 – 2315.0  
N : -250.0 – 1300.0  
U : -180.0 – 600.0  
L : -180.0 – 900.0  
P (Platinel II) : 20.0 – 1395.0  
116 Ch2 Input decimal point  
118 Ch2 Output range  
No decimal point  
The number of decimal places : 1 or 2  
—
—
1 place of decimals  
0 – 20 mA  
0 – 20 mA  
-5 – +5 V  
-10 – +10 V  
119 Ch2 0 % output setting  
120 Ch2 100 % output setting  
0.000 – 19.000  
-5.000 – 4.750  
-10.000 – 9.000  
mA  
V
4.000  
V
1.000 – 20.000  
-4.750 – 5.000  
-9.000 – 10.000  
mA  
V
20.000  
V
174 Ch2 Burnout  
None / Down / Up  
CJM / FXD TEMP  
—
—
Up  
177 Ch2 Cold junction compensation  
CJM  
0.00  
0
178 Ch2 Preset €xed terminal temperature -50.00 – 100.00*  
°C  
Sec.  
°C  
°C  
%
179 Ch2 Filter time constant  
180 Ch2 Input zero €ne adjust  
181 Ch2 Input span €ne adjust  
182 Ch2 Output zero €ne adjust  
183 Ch2 Output span €ne adjust  
189 Ch2 Loop test  
0 – 30  
-10.00 – 10.00*  
-10.00 – 10.00*  
-5.000 – 5.000  
95.000 – 105.000  
-10.00 – 110.00  
Lock / Unlock  
0.00  
0.00  
0.000  
100.000  
Cancel  
Lock  
%
%
01  
Lockout setting  
—
Advanced  
201 Display setting  
Upper: choose from 8 types*  
Lower: choose from 9 types*  
—
Upper: Ch1 INPUT  
Lower: Ch2 INPUT  
202 Channel enable  
Choose from 3 types*  
—
Ch1 enable  
Ch2 enable  
203 Brightness  
1 (darkest) – 4 (brightest)  
0 (always on), 1 – 60  
OFF / RESET  
—
—
min.  
—
4
204 Display timeout  
205 Reset all settings  
206 Version indication  
10  
OFF  
—
—
01  
Lockout setting  
Lock / Unlock  
—
Lock  
* For detailed types, refer to the operating manual (EM-5985-B).  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 7/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
EXTERNAL DIMENSIONS unit: mm [inch]  
125 (4.92)  
[4 (.16)]  
45 (1.77)  
36 (1.42)  
1
6
2
7
3
8
4
9
5
10  
DIN RAIL  
35mm wide  
11 12 13 14 15  
16  
18 19 20  
17  
* Base does not come with the unit.  
Please order separately.  
MOUNTING REQUIREMENTS unit: mm [inch]  
2–M4 SCREW  
* Mounting requirements for base.  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 8/9  
https://www.m-system.co.jp/  
MODEL: M1EXT-2  
TERMINAL ASSIGNMENTS  
CJC Sensor (CJM)  
1
6
2
7
3
8
4
9
5
10  
11 12 13 14 15  
16  
18 19 20  
17  
* Base does not come with the unit. Please order separately.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
comp. leadwire  
CH1 T/C  
+
+
3
Isolation  
Isolation  
Isolation  
–
Output  
Driver  
Low Drift  
Amplifie  
& Burnout  
+
–
11  
12  
model: CJM  
–
CH1 OUTPUT  
4
5
Digital  
Computation  
Circuit  
CJC  
SENSOR  
comp. leadwire  
Output  
Driver  
+
–
14  
15  
Isolation  
CH2 T/C  
CH2 OUTPUT  
POWER  
+
+
8
9
–
Low Drift  
Amplifie  
& Burnout  
(+)  
–
19  
20  
model: CJM  
U
CJC  
SENSOR  
(–)  
V
Display  
Circuit  
10  
JACK  
13  
16  
17  
18  
Front  
Button  
CONFIGURATOR  
1
2
6
7
Base  
Specifications are subject to change without notice.  
M1EXT-2 SPECIFICATIONS  
ES-5985 Rev.2 Page 9/9  
https://www.m-system.co.jp/  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明