M2BD-161-K/UL [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2BD-161-K/UL
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总7页 (文件大小：219K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2BD

Super-mini Signal Conditioners Mini-M Series

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

COMMUNICATION CONTROLLER

(DeviceNet)

GENERAL SPECIFICATIONS

Capacity: 4, 8 or 16 positions

Functions & Features

• Receiving up to 16 Mini-M modules

• Enabling interfacing analog I/Os to DeviceNet

• Power supplied through printed wiring on the base

Connection

DeviceNet: Euro type connector terminal (applicable

wire size: 0.2 to 2.5 mm , stripped length 7 mm)

I/O: M3 screw terminals (torque 0.8 N·m)

Power input: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel

Model

Isolation: I/O to DeviceNet to power to FG1

Power indicator: Green LED turns on with power supplied.

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

SPAN

ZERO

DeviceNet COMMUNICATION

Transmission cable: Approved for DeviceNet

Node address setting: DIP switch; 00 – 63

Baud rate setting: DIP switch

125 kbps (factory default), 250 kbps, 500 kbps

MS (Module Status) indicator: Bi-color (green/red) LED

indicates device status.

MODEL: M2BD–[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M2BD-[1][2]-[3][4]

NS (Network Status) indicator: Bi-color (green/red)

LED indicates status of the communication link.

Specify a code from below for each of [1] through [4].

(e.g. M2BD-161-R/UL)

INPUT SPECIFICATIONS

Power input specification for each I/O modules must be the

same as that of the base.

Input modules: Mini-M series; output 1 – 5 V DC;

(Each input must be isolated by signal conditioners. Non-

isolated modules such as M2BW is not usable.)

■ Analog Input

[1] CAPACITY

04: 4 positions

Input range: See each I/O module spec.

Voltage at the field I/O terminals limited within 30 V DC for

UL.

08: 8 positions

16: 16 positions

Isolation: transformer (by Mini-M module)

A/D conversion output: 16-bit binary

[2] I/O TYPE

1: Input

Signal range 0 – 100 % is converted into hexadecimal 0000

– 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

2: Output

Overall range is represented by hexadecimal FC7C – 1AF4

(-900 – +6900), for -15 – +115 %.

[3] POWER INPUT

AC Power

Note: In the firmware version 3.00 or later, analog input

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

(CE or UL not available)

In addition, negative values of analog input range -15 to 0%

can be converted into signed absolute values.

Refer to the instruction manual for details.

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

OUTPUT SPECIFICATIONS

Output modules: Model M2VS; input 1 – 5 V DC

■ Analog Output

[4] OPTIONS

Standards & Approvals

blank: Without UL or CE

/UL: UL approval, CE marking

Output range: See model M2VS spec.

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 1/7

http://www.m-system.co.jp/

MODEL: M2BD

Isolation: Transformer

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

D/A conversion output: 16-bit binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

Measurement Category II (input)

Pollution Degree 2

Overall range is represented by hexadecimal FC7C – 1AF4 (-

900 – +6900), for -15 – +115 %.

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

Note: In the firmware version 3.00 or later, analog output

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

EN 50581

Approval:

In addition, negative values of analog output range -15 to

0% can be converted into signed absolute values.

Refer to the instruction manual for details.

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

INSTALLATION

Power Consumption:

•AC:

approx. 6 VA without I/O module

approx. 30 VA with 4 modules (M2DY)

approx. 50 VA with 8 modules (M2DY)

approx. 90 VA with 16 modules (M2DY)

Current consumption:

•DC

approx. 0.25 A without I/O module

approx. 1 A with 4 modules (M2DY)

approx. 1.5 A with 8 modules (M2DY)

approx. 2.5 A with 16 modules (M2DY)

Supply voltage to network: 11 – 25 V DC supplied through

the network terminal block

Supply current to network: 60 mA max. @ 24 V

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface

Weight: Without I/O module

M2BD-04 1.2 kg (2.6 lb)

M2BD-08 1.5 kg (3.3 lb)

M2BD-16 2 kg (4.4 lb)

PERFORMANCE in percentage of span

A/D conversion: Accuracy of input module ±0.1%

D/A conversion: Accuracy of M2VS ±0.1 %

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1000 V AC @1 minute (power to I/O

module to DeviceNet module to FG1)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 2/7

http://www.m-system.co.jp/

MODEL: M2BD

COMM. MODULE FRONT PANEL

PU-2x Modular Jack

Power LED

MS Indicator LED

NS Indicator LED

PWR

NA0

NA1

NA2

NA3

NA4

NA5

DR0

DR1

Node

Address

Setting

Baud Rate

Setting

Euro Type Connector Terminal

for DeviceNet

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS unit: mm (inch)

■ M2BD-041 (INPUT BASE)

210 (8.27)

190 (7.48)

170 (6.69)

5 8 5 8 5 8 5 8

1 4 1 4 1 4 1 4

FG1

13 14

CH1

CH4

2–M3 POWER

TERMINALS

CT PROTECTOR (CTM2)

6 (.24)

16–M3 INPUT TERMINALS

* 165 (6.50) required for pneumatic tubing for M2PV.

** Attached to M2CA and M2CE.

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 3/7

http://www.m-system.co.jp/

MODEL: M2BD

■ M2BD-042 (OUTPUT BASE)

210 (8.27)

190 (7.48)

170 (6.69)

6 (.24)

8–M3 OUTPUT

TERMINALS

CH1 CH2 CH3 CH4

9 12

FG1

13 14

2–M3 POWER

TERMINALS

■ M2BD-081 (INPUT BASE)

300 (11.81)

280 (11.02)

260 (10.24)

5 8 5 8 5 8 5 8 5 8 5 8 5 8 5 8

FG1

1 4 1 4 1 4 1 4 1 4 1 4 1 4 1 4 13 14

CH1 CH7 CH8

2–M3 POWER

TERMINALS

6 (.24)

CT PROTECTOR (CTM2)

32–M3 INPUT TERMINALS

* 165 (6.50) required for pneumatic tubing for M2PV.

** Attached to M2CA and M2CE.

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 4/7

http://www.m-system.co.jp/

MODEL: M2BD

■ M2BD-082 (OUTPUT BASE)

300 (11.81)

280 (11.02)

260 (10.24)

6 (.24)

16–M3 OUTPUT

TERMINALS

CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

FG1

13 14

2–M3 POWER

TERMINALS

■ M2BD-161 (INPUT BASE)

480 (18.90)

460 (18.11)

440 (17.32)

5 8 5 8 5 8 5 8 5 8 5 8

FG1

5 8 5 8 5 8 5 8 5 8

1 4 1 4 1 4 1 4 1 4

5 8 5 8 5 8 5 8 5 8

1 4 1 4 1 4 1 4 1 4

1 4 1 4 1 4 1 4 1 4 1 4 13 14

CH11 CH16

CH1

CH5

CH6

CH10

2–M3 POWER

TERMINALS

CT PROTECTOR (CTM2)

6 (.24)

64–M3 INPUT TERMINALS

* 165 (6.50) required for pneumatic tubing for M2PV.

** Attached to M2CA and M2CE.

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 5/7

http://www.m-system.co.jp/

MODEL: M2BD

■ M2BD-162 (OUTPUT BASE)

480 (18.90)

460 (18.11)

440 (17.32)

6 (.24)

32–M3 OUTPUT TERMINALS

CH1 CH2 CH3 CH4 CH5

12 12 12 12 12

CH6 CH7 CH8 CH9 CH10

12 12 12 12 12

CH11 CH12 CH13 CH14 CH15 CH16

FG1

13 14

2–M3 POWER

TERMINALS

MOUNTING REQUIREMENTS unit: mm (inch)

■ M2BD-04

190 (7.48)

4–M5 SCREW

■ M2BD-08

280 (11.02)

4–M5 SCREW

■ M2BD-16

460 (18.11)

4–M5 SCREW

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 6/7

http://www.m-system.co.jp/

MODEL: M2BD

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG1 terminal to ground.

Caution: FG1 terminal is NOT a protective conductor terminal.

■ INPUT BASE

■ OUTPUT BASE

COMMUNICATION MODULE

INDCATOR

I/O MODULES

ISOLATION

Ch.1

INPUT

Ch.1

OUTPUT

DIP SW

LED

V+

CAN_H

Drain

CAN_L

V–

To Other

DeviceNet

Devices

Communication

CPU

ISOLATION

Ch.2

INPUT

Ch.2

OUTPUT

A / D

D / A

Conv.

I / O

CPU

MODULAR JACK

PU-2x

SERIAL

TRANSMISSION

LINE

ISOLATION

Ch.16

INPUT

Ch.16

OUTPUT

U(+)

V(–)

POWER

FG1

Specifications are subject to change without notice.

M2BD SPECIFICATIONS

ES-5002 Rev.10 Page 7/7

http://www.m-system.co.jp/

相关型号：