M2CE-5D-R2/N [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2CE-5D-R2/N
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总3页 (文件大小：116K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2CE

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

Super-mini Signal Conditioners Mini-M Series

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

CT TRANSMITTER

(RMS sensing)

Functions & Features

• Converts alternating current from a current transformer

into a standard process signal

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

• Minimum ripple

• Rerouted input signal does not pass through the base

socket in order to protect it from melting caused by rush

current of a motor

• CT Protector provided for open-circuit protection

Typical Applications

• Centralized monitoring and control of motors, pumps or

heaters by DCS

[3] POWER INPUT

AC Power

• Monitoring power line and power supply current

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

23 (.91)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(2.99)

(90 – 264 V for UL)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

124

(4.88)

mm (inch)

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

MODEL: M2CE–[1][2]-[3][4]

ORDERING INFORMATION

• Code number: M2CE-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M2CE-5A-M2/CE/Q)

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

/CE: CE marking

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

[1] INPUT

Current

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

1: 0 – 1 A AC

5: 0 – 5 A AC

/C02: Polyurethane coating

[2] OUTPUT

Current

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

/S01: Stainless steel (UL not available)

M2CE SPECIFICATIONS

ES-5121 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: M2CE

Insulation resistance: ≥ 100 MΩ with 500 V DC

GENERAL SPECIFICATIONS

Construction: Plug-in

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

STANDARDS & APPROVALS

EU conformity:

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Input waveform

EMC Directive

EMI EN 61000-6-4

RMS sensing: Up to 15 % of 3rd harmonic content

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

Input burden:

EN 50581

≤ 0.1 VA (input 0 – 1 A)

Approval:

≤ 0.5 VA (input 0 – 5 A)

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

Overload capacity: 500 % of rating for 5 sec., 120 %

continuous

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

Operational range: 0 – 120 % of rating

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power Consumption

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Ripple: 0.5 %p-p max. (100/120 Hz)

Line voltage effect: ±0.1 % over voltage range

M2CE SPECIFICATIONS

ES-5121 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: M2CE

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

approx. 200 (7.9)

(total of both sides)

CT PROTECTOR

(model: CTM2)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SOURCE

INPUT

TRANSFORMER

RMS

Operation

Output

Driver

–

OUTPUT

POWER

13 U(+)

14 V(–)

LOAD

CT PROTECTOR

model: CTM2

Base Socket

Specifications are subject to change without notice.

M2CE SPECIFICATIONS

ES-5121 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：