M2DNY-244M2 [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2DNY-244M2
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总3页 (文件大小：114K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2DNY

Z: Specify current (See OUTPUT SPECIFICATIONS)

Super-mini Signal Conditioners Mini-M Series

Voltage

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

CURRENT LOOP SUPPLY

(with square root extraction, square root extractor)

Functions & Features

• Powers a 4 – 20 mA DC current loop

• Square root extraction

• Shortcircuit protection

• Applicable to smart transmitters

[2] POWER INPUT

Typical Applications

AC Power

• Various 2-wire transmitters

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

23 (.91)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

Model

(2.99)

(90 – 264 V for UL)

DC Power

ZERO

R: 24 V DC

SPAN

124

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(4.88)

mm (inch)

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

MODEL: M2DNY–24[1]–[2][3]

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

ORDERING INFORMATION

• Code number: M2DNY-24[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M2DNY-24A-M2/CE/Q)

[3] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

/CE: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

SUPPLY OUTPUT

/Q: Option other than the above (specify the specification)

24: 24 V DC

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

INPUT

Current

4 – 20 mA DC

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

[1] OUTPUT

Current

/S01: Stainless steel (UL not available)

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

M2DNY SPECIFICATIONS

ES-5066 Rev.8 Page 1/3

http://www.m-system.co.jp/

MODEL: M2DNY

GENERAL SPECIFICATIONS

Construction: Plug-in

INSTALLATION

Power Consumption

•AC:

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: 0 to 110 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Low-end cutout: Approx. 4 – 8 % (output)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 % (input 1 – 100 %)

8% or less

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect

4% or more

Supply output: ±3 % over voltage range

Output signal: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

INPUT

SUPPLY OUTPUT

(across the terminals 1 – 8)

Output voltage: 24 – 28 V DC with no load

18 V DC min. at 20 mA

STANDARDS & APPROVALS

EU conformity:

Current rating: ≤ 22 mA DC

• Shortcircuit Protection

EMC Directive

Current limited: 30 mA max.

Protected time duration: No limit

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

INPUT SPECIFICATIONS

EN 61010-1

■ DC Current: Input resistors incorporated

Approx. 300 Ω (50 Ω as receiving resistor, 250 Ω across the

monitor terminals)

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

EN 50581

Approval:

Minimum span: 1 mA

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

Minimum span: 10 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

M2DNY SPECIFICATIONS

ES-5066 Rev.8 Page 2/3

http://www.m-system.co.jp/

MODEL: M2DNY

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Sq. Root

Extractor

Output

Driver

–

50Ω

INPUT

OUTPUT

POWER

–

2-WIRE XMTR

PWR SUPPLY

U(+)

V(–)

250Ω

–

Current

Limiter

MONITOR

1 – 5V DC

Base Socket

■ When Used as DC Supply

2-WIRE

TRANSMITTER

■ When Used as Square Root Extractor

–

50Ω

INPUT

250Ω

Specifications are subject to change without notice.

M2DNY SPECIFICATIONS

ES-5066 Rev.8 Page 3/3

http://www.m-system.co.jp/

相关型号：