M2EAXS-3L3 [MSYSTEM]

Super-mini Signal Conditioners with Display Mini-M M2E Series;


型号：	M2EAXS-3L3
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners with Display Mini-M M2E Series
文件：	总6页 (文件大小：165K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2EAXS

Super-mini Signal Conditioners with

Display Mini-M M2E Series

[1] OUTPUT

2: 4 points; N.O. or make contact

3: 4 points; N.C. or break contact

5: 2 points; SPDT or transfer contact

SELF-SYNCH ALARM

(PC programmable, dual or quad alarm trip)

[2] POWER INPUT

Functions & Features

AC Power

• Provides relay outputs at preset Self-Synch angle

• Quad or dual trip

K3: 100 – 120V AC

(Operational voltage range 85 - 132 V, 47 - 66 Hz)

L3: 200 – 240V AC

• Front LCD display indicating values in scaled engineering

unit range is used to program the module

• Adjustable deadband (hysteresis)

• ON delay time selectable

(Operational voltage range 170 - 264 V, 47 - 66 Hz)

• Hi/Lo trip and energized/de-energized coil independently

selectable for each setpoint

[3] OPTIONS

blank: none

• Settable with front button

/Q: With options (specify the specification)

• Enclosed relays

• Relays can be powered by 200 V AC and 100 V DC

• High-density mounting on DIN rail

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Typical Applications

• Annunciator

/C02: Polyurethane coating

/C03: Rubber coating

• Various alarm applications

TERMINAL SCREW MATERIAL

/S01: Stainless steel

29.5

(1.16)

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5154)

Default setting will be used if not otherwise specified.

(3.27)

RELATED PRODUCTS

• M2EA configurator software (model: M2EACFG)

124

Downloadable at M-System’s web site.

(4.88)

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual (EM-5151) for the M2EA configurator for

applicable cable types.

mm (inch)

MODEL: M2EAXS–[1]–[2][3]

GENERAL SPECIFICATIONS

Construction: Plug-in

ORDERING INFORMATION

• Code number: M2EAXS-[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M2EAXS-2-K3/Q)

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

• Specify the specification for option code /Q

(e.g./C01/S01/SET)

Housing material: Flame-resistant resin (gray)

Isolation: input to L1 or L4 alarm output to L2 or L3 alarm

output to power

(for output code 5, L3 alarm output and L4 alarm output is

not available)

INPUT

Self-synch signal

Configuration: Program with front buttons or Via PC.

Programmable features include: Refer to the parameter list.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 1/6

http://www.m-system.co.jp/

MODEL: M2EAXS

DISPLAY

Alarm Trip Operation Terminal No. in parentheses

Display functions: Displays and sets measured range,

• Example Quad N.O. contacts (LL, L, H, HH)

engineering unit

Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”)

Number of pixels: 68 × 95 (horizontal × vertical)

Character color: Yellow (reversing display of the current

value and the alarm setting value when alarm is tripped)

Display life: Approx. 60000 hours

ON OFF

L1 (3–6)

L2 (5–7)

L3 (5–8)

L4 (3–9)

OFF ON

(Expected time for the Display brightness to be reduced to

50 % when the Display is used continuously with brightness

setting 2 in 25 ℃)

Input

100

Display type: OEL display

Trip operation in power failure

Output code 2 : All relays turn OFF.

Output code 3 : All relays turn ON.

Display digit: Negative 5 digits, positive 6 digits (-99999 to

999999)

Output code 5 : Terminals 3 – 9, 5 – 8 turn ON.

Decimal point position: Selectable

INPUT SPECIFICATIONS

Measurement range: 0 – 359.99° (deg)

Minimum span: 60° (deg)

INSTALLATION

Power Consumption

•AC:

Input resistance: 1 MΩ min.

≤ 6 VA for 100 – 120 V

≤ 8 VA for 200 – 240 V

Operating temperature: -5 to +55°C (23 to 131°F)

Rated input voltage: 30 – 90 V AC

Operating humidity: 10 to 85 %RH (non-condensing)

Mounting: Surface or DIN rail

OUTPUT SPECIFICATIONS

■ Quad Alarm

Weight: Approx. 200 g (0.44 lb)

Relay rating: 100 V AC @ 1 A (cos ø = 1)

120 V AC @ 1 A (cos ø = 1)

240 V AC @ 0.5 A (cos ø = 1)

PERFORMANCE in percentage of FS input

Accuracy (display accuracy, setting accuracy):

±0.2 % of span or ±0.5°(whichever is greater) ±1 digit.

See CALCULATION EXAMPLES OF OVERALL ACCURACY.

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time (Filter time constant: 0 sec.): ≤ 0.5 sec.

(0 – 100 % at 90 % setpoint)

30 V DC @ 1 A (resistive load)

Maximum switching voltage: 250 V AC or 125 V DC

Maximum switching power: 120 VA or 30 W

Minimum load: 5 V DC @ 10 mA

Mechanical life: 5 × 10

cycles

■ DUAL ALARM

Relay rating: 100 V AC @ 4 A (cos ø = 1)

120 V AC @ 4 A (cos ø = 1)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (input to L1 or L4

alarm output to L2 or L3 alarm output to power to ground)

(for output code 5, L3 alarm output and L4 alarm output is

not available)

240 V AC @ 2 A (cos ø = 1)

30 V DC @ 4 A (resistive load)

Maximum switching voltage: 250 V AC or 125 V DC

Maximum switching power: 480 VA or 150 W

Minimum load: 5 V DC @ 10 mA

Mechanical life: 5 × 10 cycles

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Input Span 60°

• Accuracy = Input (60°) × Accuracy (0.2 %) = 0.12°

0.12°< 0.5° thus

Accuracy = (0.5°) ÷ 60° × 100 = 0.83 % + 1 digit

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 2/6

http://www.m-system.co.jp/

MODEL: M2EAXS

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (output)

Installation Category II (power)

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

L1 or L4 alarm output to L2 or L3 alarm output:

Basic insulation (300 V)

RoHS Directive

EN 50581

EXTERNAL VIEW

Display

PERCENT

50.00

80.00

70.00

30.00

20.00

▲

▼

Up Button

Mode Button

Set Button

Down Button

Mode

Configurator Jack

Down

Set

COMPONENT

FUNCTION

Display

Indicates present values, setting values and abnormal information. Two types of present values at upper

and lower are displayed by setting.

Mode button

Used to shift from measuring mode to each setting mode. Destination to shift is changed by the time press-

ing and holding the button. Used to return from each setting mode to measuring mode. (press and hold for

2 sec. or more)

Set button

Used to change setting value of setting parameter. When at setting changeable state, used to enter (save)

the setting value. Used to move on through digits of setting value for input scaling at setting changeable

state.

Used to release latching alarm in measuring mode (hold down more than 2 seconds).

Up button

Used to shift through setting parameter, and to increase or select setting value.

Used to shift through setting parameter, and to decrease or select setting value.

Down button

Con!gurator Jack

Used to con!gure with M2EA con!gurator software (model: M2EACFG). At the same time, set the lockout

setting of the unit to ‘lock’.

Refer to the operating manual (EM-5154-B) for detailed procedures.

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 3/6

http://www.m-system.co.jp/

MODEL: M2EAXS

PARAMETER LIST

MODE

ITEM SETTING PARAMETER

RANGE

UNIT

—

INITIAL VALUE

Basic setting

Lockout setting

Angle offset

Lock / Unlock

—

Lock

Deg.

—

0.00

Angle span

60.00 – 359.99

CW / CCW

270.00

Rotating direction

0 % input scaling

100 % input scaling

Input decimal point

-99999 – 999999

—

0.00

-99999 – 999999

—

100.00

No decimal point

The number of decimal places : 1 – 5

—

2 places of decimals

Unit (INP Scaling)

L1 alarm enable

L1 alarm setpoint

L1 trip action

Choose from 68 types

Disable / Enable

—

Enable

-99999 – 999999

High / Low

20.00

Low

L1 deadband

0 – 999999

0.01

L1 coil at alarm

L2 alarm enable

L2 alarm setpoint

Energized / De-energized

Disable / Enable

Energized

Enable

-99999 – 999999

80.00 (2 points alarm)

30.00 (4 points alarm)

L2 trip action

High / Low

—

High (2 points alarm)

Low (4 points alarm)

L2 deadband

0 – 999999

—

0.01

L2 coil at alarm

L3 alarm enable

L3 alarm setpoint

L3 trip action

Energized / De-energized

Disable / Enable

Energized

—

Enable

-99999 – 999999

High / Low

—

70.00

—

High

L3 deadband

0 – 999999

—

0.01

L3 coil at alarm

L4 alarm enable

L4 alarm setpoint

L4 trip action

Energized / De-energized

Disable / Enable

—

Energized

—

Enable

-99999 – 999999

High / Low

—

80.00

—

High

L4 deadband

0 – 999999

—

0.01

L4 coil at alarm

Alarm ON-delay time

Power ON-delay time

Latching alarm

Alarm test

Energized / De-energized

0 – 999

—

Energized

sec.

—

0 – 999

Disable / Enable

—

Disable

—

Cancel

Option

Filter time constant

Lockout setting

Display setting

0 – 30

sec.

—

Lock / Unlock

Lock

Advanced

Upper: choose from 3 types

Lower: choose from 5 types

1 (darkest) – 4 (brightest)

0 (always on), 1 – 60

OFF / RESET

—

Upper: INPUT (Scaling)

Lower: ALARM

Brightness

—

min.

—

Display timeout

Reset all settings

Version indication

Lockout setting

OFF

—

Lock / Unlock

—

Lock

For detailed setting, refer to the operating manual (EM-5154-B).

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 4/6

http://www.m-system.co.jp/

MODEL: M2EAXS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

DIN RAIL

35mm wide

11–M3

SCREW

11 10

22 (.87)

29 (1.14)

94 (3.70)

124 (4.88)

29.5 (1.16)

[4 (.16)]

(.31)

• When mounting, no extra space is needed between units.

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 5/6

http://www.m-system.co.jp/

MODEL: M2EAXS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

■ OUTPUT CODE 3: N.C. RELAY

■ OUTPUT CODE 2: N.O. RELAY

L4 OUTPUT

L1 OUTPUT

COM

L4 OUTPUT

L1 OUTPUT

COM

Low Drift

Amplifie

SELF-

SYNCH

Digital

Computation

Circuit

L3 OUTPUT

L2 OUTPUT

COM

L3 OUTPUT

L2 OUTPUT

COM

CONFIGURATOR

JACK

POWER

Display

Circuit

CONTROL

Base Socket

*1. The input engineering unit value increases when the self-synch rotates

clockwise. For changing the operation to counterclockwise and increase,

set the ITEM 08 'Rotating direction' to CCW.

*2. The power input of the unit has polarity. Be sure that the connection for

R1 and R2 of the self-synch.

■ OUTPUT CODE 5: SPDT RELAY

N.C.

N.O.

COM

N.C.

N.O.

COM

L1 OUTPUT

L2 OUTPUT

Low Drift

Amplifie

SELF-

SYNCH

Digital

Computation

Circuit

CONFIGURATOR

JACK

POWER

Display

Circuit

CONTROL

Base Socket

*1. The input engineering unit value increases when the self-synch rotates

clockwise. For changing the operation to counterclockwise and increase,

set the ITEM 08 'Rotating direction' to CCW.

*2. The power input of the unit has polarity. Be sure that the connection for

R1 and R2 of the self-synch.

■ Relay Protection

• AC Powered

• DC Powered

Inductive

Load (Coil)

Inductive

Load (Coil)

Varistor or Spark

Quenching Circuit

Diode, Varistor or

CR Circuit

LOAD

Specifications are subject to change without notice.

M2EAXS SPECIFICATIONS

ES-5154 Rev.1 Page 6/6

http://www.m-system.co.jp/

M2EAXS-3L3 [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E