首页 |元器件品牌

M2EAXV-2-M2/Q [MSYSTEM]

Super-mini Signal Conditioners with Display Mini-M M2E Series;
M2EAXV-2-M2/Q
型号： M2EAXV-2-M2/Q
厂家： M-SYSTEM    M-SYSTEM
描述：

Super-mini Signal Conditioners with Display Mini-M M2E Series
文件： 总6页 (文件大小：165K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MODEL: M2EAXV  
Super-mini Signal Conditioners with  
Display Mini-M M2E Series  
[1] OUTPUT  
2: 4 points; N.O. or make contact  
3: 4 points; N.C. or break contact  
5: 2 points; SPDT or transfer contact  
DC ALARM  
(PC programmable, dual or quad alarm trip)  
[2] POWER INPUT  
Functions & Features  
AC Power  
• Provides relay outputs at preset DC input levels  
• Quad or dual trip  
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,  
47 – 66 Hz)  
• Front LCD display indicating values in scaled engineering  
unit range is used to program the module  
• Adjustable deadband (hysteresis)  
• ON delay time selectable  
DC Power  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
P: 110 V DC  
• Hi/Lo trip and energized/de-energized coil independently  
selectable for each setpoint  
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)  
• Settable with front button  
• Enclosed relays  
[3] OPTIONS  
blank: none  
• Relays can be powered by 200 V AC and 100 V DC  
• High-density mounting on DIN rail  
/Q: With options (specify the specification)  
Typical Applications  
• Annunciator  
SPECIFICATIONS OF OPTION: Q (multiple selections)  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
• Various alarm applications  
/C02: Polyurethane coating  
29.5  
(1.16)  
/C03: Rubber coating  
TERMINAL SCREW MATERIAL  
/S01: Stainless steel  
EX-FACTORY SETTING  
83  
(3.27)  
/SET: Preset according to the Ordering Information Sheet  
(No. ESU-5146)  
Default setting will be used if not otherwise specified.  
Up  
Mo  
de  
Do  
wn  
124  
Se  
t
(4.88)  
RELATED PRODUCTS  
mm (inch)  
• M2EA configurator software (model: M2EACFG)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual (EM-5151) for the M2EA configurator for  
applicable cable types.  
MODEL: M2EAXV–[1]-[2][3]  
ORDERING INFORMATION  
• Code number: M2EAXV-[1]-[2][3]  
Specify a code from below for each [1] through [3].  
(e.g. M2EAXV-2-M2/Q)  
GENERAL SPECIFICATIONS  
Construction: Plug-in  
• Specify the specification for option code /Q  
(e.g. /C01/S01/SET)  
Connection: M3 screw terminals (torque 0.8 N·m)  
Screw terminal: Chromated steel (standard) or stainless  
steel  
Housing material: Flame-resistant resin (gray)  
Isolation: input to L1 or L4 alarm output to L2 or L3 alarm  
output to power  
INPUT – Field-selectable  
◆ DC Input  
• Current input: 0 - 50 mA DC  
• Voltage input: -1000 - +1000 mV DC  
• Voltage input: -10 - +10 V DC  
(for output code 5, L3 alarm output and L4 alarm output is  
not available)  
Configuration: Program with front buttons or Via PC.  
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 1/6  
http://www.m-system.co.jp/  
MODEL: M2EAXV  
Programmable features include: Refer to the parameter list.  
Configurator connection: 2.5 dia. miniature jack;  
RS-232-C level  
Mechanical life: 5 × 10  
7
cycles  
■ DUAL ALARM  
Relay rating: 100 V AC @ 4 A (cos ø = 1)  
120 V AC @ 4 A (cos ø = 1)  
240 V AC @ 2 A (cos ø = 1)  
DISPLAY  
30 V DC @ 4 A (resistive load)  
Display functions: Displays and sets measured range,  
Maximum switching voltage: 250 V AC or 125 V DC  
Maximum switching power: 480 VA or 150 W  
Minimum load: 5 V DC @ 10 mA  
engineering unit  
Display size: Approx. 15.6 × 20.8 mm (0.61” × 0.82”)  
Number of pixels: 68 × 95 (horizontal × vertical)  
Character color: Yellow (reversing display of the current  
value and the alarm setting value when alarm is tripped)  
Display life: Approx. 60000 hours  
Mechanical life: 5 × 10 cycles  
7
Alarm Trip Operation Terminal No. in parentheses  
• Example Quad N.O. contacts (LL, L, H, HH)  
(Expected time for the Display brightness to be reduced to  
50 % when the Display is used continuously with brightness  
setting 2 in 25 ℃)  
ON OFF  
ON OFF  
L1 (3–6)  
L2 (5–7)  
L3 (5–8)  
L4 (3–9)  
Display type: OEL display  
OFF ON  
OFF ON  
Display digit: Negative 5 digits, positive 6 digits (-99999 to  
999999)  
Decimal point position: Selectable  
Input  
%
0
50  
100  
LL  
L
H
HH  
INPUT SPECIFICATIONS  
■ DC Current  
Trip operation in power failure  
Output code 2 : All relays turn OFF.  
Output code 3 : All relays turn ON.  
Input resistance: Incorporated (23 Ω)  
Input range: 0 - 50 mA DC  
Output code 5 : Terminals 3 – 9, 5 – 8 turn ON.  
Minimum span: 2 mA  
Offset: Lower range can be any specific value within the  
input range provided that the minimum span is maintained.  
The measurement available for -5 - +105% of input setting  
range.  
INSTALLATION  
Power Consumption  
•AC:  
Max. 5 VA at 100 V  
Max. 6 VA at 200 V  
Max. 7 VA at 264 V  
•DC: ≤ 2.5 W  
■ DC Voltage  
•Narrow Spans (mV)  
Input range: -1000 – +1000 mV DC  
Minimum span: 100 mV  
Operating temperature: -5 to +55°C (23 to 131°F)  
•Wide Spans (V)  
Operating humidity: 10 to 85 %RH (non-condensing)  
Mounting: Surface or DIN rail  
Input range: -10 – +10 V DC  
Minimum span: 1 V  
Weight: 200 g (0.44 lb)  
Offset: Lower range can be any specific value within the  
input range provided that the minimum span is maintained.  
Input resistance: 1 MΩ minimum  
The measurement available for -5 - +105% of input setting  
range.  
PERFORMANCE in percentage of FS input  
Accuracy (display accuracy, setting accuracy):  
± (0.1% of FS + 1 digit)  
See CALCULATION EXAMPLES OF OVERALL ACCURACY.  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Response time (Filter time constant: 0 sec.): ≤ 0.5 sec.  
(0 – 100 % at 90 % setpoint)  
OUTPUT SPECIFICATIONS  
■ Quad Alarm  
Relay rating: 100 V AC @ 1 A (cos ø = 1)  
120 V AC @ 1 A (cos ø = 1)  
Line voltage effect: ±0.1 % over voltage range  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @ 1 minute (input to L1 or L4  
alarm output to L2 or L3 alarm output to power to ground)  
(for output code 5, L3 alarm output and L4 alarm output is  
not available)  
240 V AC @ 0.5 A (cos ø = 1)  
30 V DC @ 1 A (resistive load)  
Maximum switching voltage: 250 V AC or 125 V DC  
Maximum switching power: 120 VA or 30 W  
Minimum load: 5 V DC @ 10 mA  
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 2/6  
http://www.m-system.co.jp/  
MODEL: M2EAXV  
CALCULATION EXAMPLES OF OVERALL ACCURACY  
[Example] Input Range -10 – +10 V, Input Setting -5 – +5 V  
• Accuracy = Input Range Span (20 V) ÷ Input Span Setting  
(10 V) × 0.1 % = ±0.2 % + 1 digit  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
Low Voltage Directive  
EN 61010-1  
Measurement Category II (output)  
Installation Category II (power)  
Pollution Degree 2  
Input or output to power: Reinforced insulation (300 V)  
Input to output: Basic insulation (300 V)  
L1 or L4 alarm output to L2 or L3 alarm output:  
Basic insulation (300 V)  
RoHS Directive  
EN 50581  
EXTERNAL VIEW  
Display  
PERCENT  
50.00  
%
L4  
L3  
L2  
L1  
80.00  
70.00  
30.00  
20.00  
▲
▲
▼
▼
Up Button  
Mode Button  
Set Button  
Down Button  
Up  
Mode  
Configurator Jack  
Down  
Set  
COMPONENT  
FUNCTION  
Display  
Indicates present values, setting values and abnormal information. Two types of present values at upper  
and lower are displayed by setting.  
Mode button  
Used to shift from measuring mode to each setting mode. Destination to shift is changed by the time press-  
ing and holding the button. Used to return from each setting mode to measuring mode. (press and hold for  
2 sec. or more)  
Set button  
Used to change setting value of setting parameter. When at setting changeable state, used to enter (save)  
the setting value. Used to move on through digits of setting value for input scaling at setting changeable  
state.  
Used to release latching alarm in measuring mode (hold down more than 2 seconds).  
Up button  
Used to shift through setting parameter, and to increase or select setting value.  
Used to shift through setting parameter, and to decrease or select setting value.  
Down button  
Con!gurator Jack  
Used to con!gure with M2EA con!gurator software (model: M2EACFG). At the same time, set the lockout  
setting of the unit to ‘lock’.  
Refer to the operating manual (EM-5146-B) for detailed procedures.  
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 3/6  
http://www.m-system.co.jp/  
MODEL: M2EAXV  
PARAMETER LIST  
MODE  
ITEM SETTING PARAMETER  
RANGE  
UNIT  
—
INITIAL VALUE  
Lock  
Basic setting  
01  
10  
Lockout setting  
Input range  
Lock / Unlock  
0 – 50 mA  
-1000 – +1000 mV  
-10 – +10 V  
—
0 – 50 mA  
12  
13  
0 % input setting  
0.00 – 48.00  
mA  
mV  
V
4.00  
-1000.0 – 900.0  
-10.000 – 9.000  
2.00 – 50.00  
100 % input setting  
mA  
mV  
V
20.00  
-900.0 – 1000.0  
-9.000 – 10.000  
-99999 – 999999  
-99999 – 999999  
No decimal point  
The number of decimal places : 1 – 5  
14  
15  
16  
0 % input scaling  
100 % input scaling  
Input decimal point  
—
0.00  
—
100.00  
—
2 places of decimals  
17  
30  
31  
32  
33  
34  
40  
41  
Unit (INP Scaling)  
L1 alarm enable  
L1 alarm setpoint  
L1 trip action  
Choose from 68 types  
Disable / Enable  
*
—
—
—
—
—
—
—
—
%
Enable  
-99999 – 999999  
High / Low  
*
20.00  
Low  
L1 deadband  
0 – 999999  
*
0.01  
L1 coil at alarm  
L2 alarm enable  
L2 alarm setpoint  
Energized / De-energized  
Disable / Enable  
Energized  
Enable  
-99999 – 999999  
*
80.00 (2 points alarm)  
30.00 (4 points alarm)  
42  
L2 trip action  
High / Low  
—
High (2 points alarm)  
Low (4 points alarm)  
43  
44  
50  
51  
52  
53  
54  
60  
61  
62  
63  
64  
70  
71  
72  
89  
79  
80  
81  
01  
91  
L2 deadband  
0 – 999999  
*
—
—
0.01  
L2 coil at alarm  
L3 alarm enable  
L3 alarm setpoint  
L3 trip action  
Energized / De-energized  
Disable / Enable  
Energized  
—
Enable  
-99999 – 999999  
High / Low  
*
—
70.00  
—
High  
L3 deadband  
0 – 999999  
*
—
0.01  
L3 coil at alarm  
L4 alarm enable  
L4 alarm setpoint  
L4 trip action  
Energized / De-energized  
Disable / Enable  
—
Energized  
—
Enable  
-99999 – 999999  
High / Low  
*
—
80.00  
—
High  
L4 deadband  
0 – 999999  
*
—
0.01  
L4 coil at alarm  
Alarm ON-delay time  
Power ON-delay time  
Latching alarm  
Alarm test  
Energized / De-energized  
0 – 999  
—
Energized  
sec.  
sec.  
—
0
0 – 999  
5
Disable / Enable  
—
Disable  
—
Cancel  
Option  
Filter time constant  
Input Zero !ne adjust  
Input Span !ne adjust  
Lockout setting  
Display setting  
0 – 30  
sec.  
%
0
-5.000 – 5.000  
95.000 – 105.000  
Lock / Unlock  
0.000  
%
100.000  
—
Lock  
Advanced  
Upper: choose from 3 types  
Lower: choose from 5 types  
1 (darkest) – 4 (brightest)  
0 (always on), 1 – 60  
OFF / RESET  
—
*
—
Upper: INPUT (Scaling)  
Lower: ALARM  
*
92  
93  
94  
95  
01  
Brightness  
—
min.  
—
4
Display timeout  
Reset all settings  
Version indication  
Lockout setting  
10  
OFF  
—
—
Lock / Unlock  
—
Lock  
* For detailed setting, refer to the operating manual (EM-5146-B).  
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 4/6  
http://www.m-system.co.jp/  
MODEL: M2EAXV  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
6 (.23)  
3
2
5
1
4
2–4.2x5  
(.17x.20)  
6
MTG HOLE  
6 (.24) deep  
DIN RAIL  
35mm wide  
9
8
7
11–M3  
SCREW  
11 10  
22 (.87)  
29 (1.14)  
94 (3.70)  
124 (4.88)  
29.5 (1.16)  
8
[4 (.16)]  
(.31)  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
■ OUTPUT CODE 3: N.C. RELAY  
■ OUTPUT CODE 2: N.O. RELAY  
+
RY  
1
CURRENT  
INPUT  
9
6
L4 OUTPUT  
L1 OUTPUT  
COM  
9
6
3
8
7
5
L4 OUTPUT  
L1 OUTPUT  
COM  
–
+
Low Drift  
Amplifie  
2
4
RY  
23Ω  
–
VOLTAGE  
INPUT  
Digital  
Computation  
Circuit  
3
RY  
RY  
8
L3 OUTPUT  
L2 OUTPUT  
COM  
L3 OUTPUT  
L2 OUTPUT  
COM  
CONFIGURATOR  
JACK  
7
5
Display  
Circuit  
10  
11  
U(+)  
POWER  
CONTROL  
SW  
V(–)  
Base Socket  
■ OUTPUT CODE 5: SPDT RELAY  
N.C.  
N.O.  
COM  
N.C.  
N.O.  
COM  
U(+)  
V(–)  
9
6
+
RY  
RY  
1
L1 OUTPUT  
CURRENT  
INPUT  
–
+
Low Drift  
Amplifie  
2
4
23Ω  
–
3
VOLTAGE  
INPUT  
Digital  
Computation  
Circuit  
8
L2 OUTPUT  
POWER  
7
CONFIGURATOR  
JACK  
5
10  
11  
Display  
Circuit  
CONTROL  
SW  
Base Socket  
■ Relay Protection  
• AC Powered  
• DC Powered  
Inductive  
Load (Coil)  
Inductive  
Load (Coil)  
Varistor or Spark  
Quenching Circuit  
Diode, Varistor or  
CR Circuit  
LOAD  
LOAD  
U
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 5/6  
http://www.m-system.co.jp/  
MODEL: M2EAXV  
Specifications are subject to change without notice.  
M2EAXV SPECIFICATIONS  
ES-5146 Rev.1 Page 6/6  
http://www.m-system.co.jp/  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明