M2SED-413-M2 [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2SED-413-M2
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总4页 (文件大小：128K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2SED

Super-mini Signal Conditioners Mini-M Series

SETPOINT 2 OUTPUT

3: Lo (coil energized at alarm)

DC ALARM

(thumbwheel switch adjustment)

[2] POWER INPUT

Functions & Features

AC Power

• Provides SPDT relay outputs at preset DC input levels

• Dual (Hi / Lo) trip

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

• Thumbwheel switch setpoint adjustments

• Enclosed relays

(90 – 264 V for UL)

DC Power

• Relays can be powered 110 V DC

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

Typical Applications

• Annunciator

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

• Various alarm applications

29.5 (1.16)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

(2.99)

[3] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

/CE: CE marking

124

(4.88)

/UL: UL approval, CE marking

Other Options

mm (inch)

blank: none

/Q: Option other than the above (specify the specification)

MODEL: M2SED–[1]13–[2][3]

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

ORDERING INFORMATION

• Code number: M2SED-[1]13-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. M2SED-613-P/CE/Q)

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

• Specify the specification for option code /Q

(e.g. /C01/S01)

/S01: Stainless steel (UL not available)

Note: Must be used with its socket. NOT installable to a

multi-unit installation base. (e.g. model: M2BS-16)

GENERAL SPECIFICATIONS

Construction: Plug-in

[1] INPUT

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

Setpoint adjustments: Thumbwheel switches (front);

0 – 99 % independently; 1 % increments

Hysteresis (deadband): 1 ± 0.3 %

SETPOINT 1 OUTPUT

1: Hi (coil energized at alarm)

Front LEDs: Red light turns on when the coil is energized.

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

M2SED SPECIFICATIONS

ES-5042 Rev.16 Page 1/4

http://www.m-system.co.jp/

MODEL: M2SED

Low Voltage Directive

EN 61010-1

OUTPUT SPECIFICATIONS

■ Relay Contact:

Measurement Category II (output)

Installation Category II (power)

Pollution Degree 2

100 V AC @5 A (cos ø = 1)

120 V AC @5 A (cos ø = 1)

240 V AC @2.5 A (cos ø = 1)

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

30 V DC @5 A (resistive load)

Maximum switching voltage: 250 V AC or 125 V DC

Maximum switching power: 600 VA or 150 W

Minimum load: 5 V DC @10 mA

EN 50581

Approval:

Mechanical life: 5 × 10

cycles

UL/C-UL general safety requirements

(UL 61010B-1, CAN/CSA-C22.2 No.1010-1)

Alarm Trip Operation

Terminal No. in parentheses

(3–6)ON

(3–9)ON

Output 1

(5–7)ON

Output 2

(5–8)ON

Input

(%)

▲

100

Setpoint 2

Setpoint 1

Trip Operation in Power Failure: Terminals 3 – 9 and 5 – 8 turn on.

INSTALLATION

Power Consumption

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Installation Base (model: M2BS) is not adaptable.

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Setpoint accuracy: ±0.5 %

Trip point repeatability: ±0.05 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: 0.5 ± 0.2 sec. (0 – 100 % at 90 % setpoint)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

M2SED SPECIFICATIONS

ES-5042 Rev.16 Page 2/4

http://www.m-system.co.jp/

MODEL: M2SED

FRONT VIEW

• Setpoint Adj.

Output 1

Output 2

• Monitor LED

Output 1

The front cover cannot be

turned open by 180 deg.

when there is no extra space

between units.

Output 2

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

11–M3

SCREW

11 10

21.5 (.85) 7.3 (.29)

86.7 (3.41)

116.7 (4.59)

22 (.87)

[4 (.16)]

29.5 (1.16)

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM2)

11 10

Input shunt resistor attached

for current input.

M2SED SPECIFICATIONS

ES-5042 Rev.16 Page 3/4

http://www.m-system.co.jp/

MODEL: M2SED

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

THUMBWHEEL

SWITCHES

Converter

Comparator

9 9

N.C.

N.O.

COM

N.C.

N.O.

COM

Low Drift

Amplifier

–

OUTPUT 1

INPUT

OUTPUT 2

POWER

THUMBWHEEL

SWITCHES

Converter

9 9

10 U(+)

11 V(–)

Base Socket

* Input shunt resistor attached for current input.

■ Relay Protection

• AC Powered

• DC Powered

Inductive

Load (Coil)

Inductive

Load (Coil)

Varistor or

CR Circuit

Diode, Varistor or

CR Circuit

LOAD

Specifications are subject to change without notice.

M2SED SPECIFICATIONS

ES-5042 Rev.16 Page 4/4

http://www.m-system.co.jp/

相关型号：