M2SES-1B4-P/N [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2SES-1B4-P/N
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总3页 (文件大小：99K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2SES

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

Super-mini Signal Conditioners Mini-M Series

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

HIGH/LOW SELECTOR

Functions & Features

• Monitors two DC input signals and transmits an output

signal proportional to the higher or lower input

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Typical Applications

• Selecting greater flow, pressure, etc. for control

• Heating control based on the highest temperature among

several T/C’s on a furnace

23 (.91)

Model

(2.99)

[4] POWER INPUT

AC Power

124

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(4.88)

mm (inch)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

MODEL: M2SES–[1][2][3]–[4][5]

(90 – 264 V for UL)

DC Power

ORDERING INFORMATION

• Code number: M2SES-[1][2][3]-[4][5]

Specify a code from below for each [1] through [5].

(e.g. M2SES-2AA-M2/CE/Q)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

[1] SELECTING FUNCTION

1: Low input

[5] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

2: High input

[2] INPUT

Current

/CE: CE marking

/UL: UL approval, CE marking

Other Options

A: 4 – 20 mA DC (Input resistance 250 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

blank: none

/Q: Option other than the above (specify the specification)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

[3] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

M2SES SPECIFICATIONS

ES-5049 Rev.14 Page 1/3

http://www.m-system.co.jp/

MODEL: M2SES

Dielectric strength:

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

1000 V AC @1 minute (input to output)

2000 V AC @1 minute (input or output to power to ground)

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

STANDARDS & APPROVALS

EU conformity:

/S01: Stainless steel (UL not available)

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

GENERAL SPECIFICATIONS

Construction: Plug-in

Low Voltage Directive

EN 61010-1

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Selecting operation: Automatic

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power Consumption

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Approx. 5 VA at 264 V

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

Selecting sensitivity: 0.5%

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

M2SES SPECIFICATIONS

ES-5049 Rev.14 Page 2/3

http://www.m-system.co.jp/

MODEL: M2SES

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Output

Driver

–

Selector

INPUT 1

INPUT 2

OUTPUT

POWER

–

U(+)

V(–)

Base Socket

*Input shunt resistor incorporated for current inputs.

Specifications are subject to change without notice.

M2SES SPECIFICATIONS

ES-5049 Rev.14 Page 3/3

http://www.m-system.co.jp/

相关型号：