M2VF-4W0-R2/X1 [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2VF-4W0-R2/X1
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总6页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2VF

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

Super-mini Signal Conditioners Mini-M Series

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/CE’ or ‘/UL’ for ‘Standards & Approvals’ code.)

SIGNAL TRANSMITTER

(high speed response)

Functions & Features

• Converts DC input from a sensor into a standard

process signal

• Isolation between input and output

• 180-microsecond response

[2] OUTPUT

Current

Typical Applications

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

FW: -10 – +10 mA DC (Load resistance 700 Ω max.)

GW: -1 – +1 mA DC (Load resistance 7000 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

• Isolation for a vibration analyzing system

23 (.91)

Model

(2.99)

ZERO

SPAN

124

(4.88)

mm (inch)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

MODEL: M2VF–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M2VF-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M2VF-6A-M2/CE/Q)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/V01)

[3] POWER INPUT

AC Power

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

[1] INPUT

Current

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

A: 4 – 20 mA DC (Input resistance 250 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

(90 – 264 V for UL)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 1/6

http://www.m-system.co.jp/

MODEL: M2VF

Load resistance: Output drive 15 V max.;

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

7 V for bidirectional outputs

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

/CE: CE marking

Offset: Max. 1.5 times span

/UL: UL approval, CE marking

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

Custom specification

(Refer to the custom specification list for difference

of specification and combination of code numbers.)

blank: none

INSTALLATION

Power Consumption

/X1: Response time (CE or UL not available)

/X2: Input (CE or UL not available)

Other Options

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

blank: none

Approx. 5 VA at 264 V

/Q: Option other than the above (specify the specification)

•DC: Approx. 3 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

ADJUSTMENT

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

/V01: Multi-turn fine adjustment (UL not available)

TERMINAL SCREW MATERIAL

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 180 μsec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

/S01: Stainless steel (UL not available)

GENERAL SPECIFICATIONS

Construction: Plug-in

1000 V AC @1 minute (input to output)

2000 V AC @1 minute (input or output to power to ground)

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

STANDARDS & APPROVALS

EU conformity:

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

EMC Directive

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

INPUT SPECIFICATIONS

■ DC Current:

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Functional insulation (300 V)

RoHS Directive

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

(-30 – +30 V for the input code 01. Span 60 V max.)

Minimum span: 1 V

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

Offset: Max. 1.5 times span

Input resistance: ≥ 1 MΩ

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

OUTPUT SPECIFICATIONS

■ DC Current: -10 – +20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 2/6

http://www.m-system.co.jp/

MODEL: M2VF

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM2)

14 13

Input shunt resistor attached

for current input.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

SIGNAL SOURCE

OUTPUT

POWER

–

U(+)

V(–)

Base Socket

*Input shunt resistor attached for current input.

The M2VF, by its fast-response feature, is not designed to eliminate noise present in the input signal.

Use a shielded twisted-pair cable for preventing noise entering through the input wiring.

Specifications are subject to change without notice.

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 3/6

http://www.m-system.co.jp/

MODEL: M2VF

CUSTOM SPECIFICATION LIST

Refer to the following pages for each detailed custom specification.

Custom specification: Option /X1

■ Major specification changes

Response time: 5.3 ms ±30 % (0 – 90 %)

Custom specification: Option /X2

■ Major specification changes

Input: 0 - 0.5 V DC (Input resistance 200 kΩ min.)

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 4/6

http://www.m-system.co.jp/

MODEL: M2VF

CUSTOM SPECIFICATION : OPTION /X1

Major specification changes

Response time: 5.3 msec. ±30 %

MODEL: M2VF–4W4W–[3]/N/X1[4]

Same as standard specification (without customization)

except followings.

Refer to standard specification pages.

ORDERING INFORMATION

• Code number: M2VF-4W4W-[3]/N/X1[4]

For [3] and [4] same code as standard specification is

available.

(e.g. M2VF-4W4W-M2/N/X1/Q)

Refer to standard specification pages.

SPECIFICATION CHANGES

■ Performance in percentage of span

Response time: 5.3 msec. ±30 % (0 – 90 %)

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 5/6

http://www.m-system.co.jp/

MODEL: M2VF

CUSTOM SPECIFICATION : OPTION /X2

Major specification changes

Input: 0 - 0.5 V DC (input resistance 200 kΩ)

MODEL: M2VF–0[2]–[3]/N/X2[4]

Same as standard specification (without customization)

except followings.

Refer to standard specification pages.

ORDERING INFORMATION

• Code number: M2VF-0[2]-[3]/N/X2[4]

For each each [2] through [4] same code as standard

specification is available.

(e.g. M2VF-04W-M2/N/X2/Q)

Refer to standard specification pages.

SPECIFICATION CHANGES

■ Input specifications

• Input 0 - 0.5 V DC

• Input resistance: 200 kΩ min.

M2VF SPECIFICATIONS

ES-5014 Rev.20 Page 6/6

http://www.m-system.co.jp/

相关型号：