M2VF2-4W4-R2/X1 [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2VF2-4W4-R2/X1
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总5页 (文件大小：116K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2VF2

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

Super-mini Signal Conditioners Mini-M Series

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

SIGNAL TRANSMITTER

(ultra-high speed response 30 μsec.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

01: Specify voltage (See INPUT SPECIFICATIONS)

(Select ‘/CE’ or ‘/UL’ for ‘Standards & Approvals’ code.)

Functions & Features

• Converts DC input from a sensor into a standard process

signal

• 30-microsecond response

[2] OUTPUT

Typical Applications

Current

• Isolation for a vibration analyzing system

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

Voltage

23 (.91)

Model

(2.99)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 200 Ω min.)

4: 0 – 10 V DC (Load resistance 2000 Ω min.)

5: 0 – 5 V DC (Load resistance 1000 Ω min.)

6: 1 – 5 V DC (Load resistance 1000 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

ZERO

SPAN

124

(4.88)

mm (inch)

MODEL: M2VF2–[1][2]–[3][4]

[3] POWER INPUT

AC Power

ORDERING INFORMATION

• Code number: M2VF2-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M2VF2-4W4W-R/CE/Q)

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

• Special input range (For codes Z, 0 & 01)

• Specify the specification for option code /Q

(e.g. /C01/S01)

(90 – 264 V for UL)

DC Power

R: 24 V DC

[1] INPUT

Current

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

R2: 11 – 27 V DC

A1: 4 – 20 mA DC (Input resistance 50 Ω)

(Select only ‘/N’ for ‘Standards & Approvals’ code.)

A: 4 – 20 mA DC (Input resistance 250 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

(Operational voltage range 11 – 27 V, ripple 10 %p-p max.)

(Select ‘/N’ for ‘Standards & Approvals’ code.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

M2VF2 SPECIFICATIONS

ES-5055 Rev.12 Page 1/5

http://www.m-system.co.jp/

MODEL: M2VF2

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

INSTALLATION

Power Consumption

•AC:

/CE: CE marking

Approx. 4 VA at 100 V

Approx. 5 VA at 200 V

Approx. 6 VA at 264 V

•DC: Approx. 3 W

/UL: UL approval, CE marking

Custom specification

(Refer to the custom specification list for difference

of specification and combination of code numbers.)

blank: none

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

/X1: Input (CE or UL not available)

Other Options

Weight: 150 g (0.33 lb)

blank: none

/Q: Option other than the above (specify the specification)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Frequency characteristics: 15 kHz, -3 dB

Response time: ≤ 30 µsec. (0 – 90 %)

(except the user specified ranges)

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

/S01: Stainless steel (UL not available)

GENERAL SPECIFICATIONS

Construction: Plug-in

STANDARDS & APPROVALS

EU conformity:

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

EMC Directive

EMI EN 61000-6-4

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

EMS EN 61000-6-2

Low Voltage Directive

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

(±2 % with the output suffix codes 4W and 5W selected)

Span adjustment: 95 to 105 % (front)

(98 to 102 % with the output suffix codes 4W and 5W

selected.)

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

Approval:

INPUT SPECIFICATIONS

■ DC Current:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

(-30 – +30 V for the input code 01. Span 60 V max.)

Minimum span: 1 V

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

Offset: Max. 1.5 times span

Input resistance: ≥ 1 MΩ

OUTPUT SPECIFICATIONS

■ DC Current

Parallel load capacitance: Max. 2000 pF

M2VF2 SPECIFICATIONS

ES-5055 Rev.12 Page 2/5

http://www.m-system.co.jp/

MODEL: M2VF2

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM2)

14 13

Input shunt resistor attached

for current input.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

SIGNAL SOURCE

OUTPUT

POWER

–

U(+)

V(–)

Base Socket

*Input shunt resistor attached for current input.

The M2VF2, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable to

prevent noise from entering through the input wiring.

The described response time may not be assured with the current output when the cable's line capacitance is greater than 2000 pF.

Specifications are subject to change without notice.

M2VF2 SPECIFICATIONS

ES-5055 Rev.12 Page 3/5

http://www.m-system.co.jp/

MODEL: M2VF2

CUSTOM SPECIFICATION LIST

Refer to the following pages for each detailed custom specification.

Custom specification: Option /X1

■ Major specification changes

Input: 0 - 100 mV DC

M2VF2 SPECIFICATIONS

ES-5055 Rev.12 Page 4/5

http://www.m-system.co.jp/

MODEL: M2VF2

CUSTOM SPECIFICATION : OPTION /X1

Major specification changes

Input: 0 - 100 mV DC

MODEL: M2VF2–0[2]–[3]/N/X1[4]

Same as standard specification (without customization)

except followings.

Refer to standard specification pages.

ORDERING INFORMATION

• Code number: M2VF2-0[2]-[3]/N/X1[4]

For [2] and [4] same code as standard specification is

available.

(e.g. M2VF2-04W-M2/N/X1/Q)

Refer to standard specification pages.

SPECIFICATION CHANGES

■ Input specifications

• Input 0 - 100 mV DC

■ PERFORMANCE

Accuracy: ±0.2 %

Temp. coefficient: ±0.04 %/°C (±0.02 %/°F)

Response time: ≤ 60 μsec. (0 – 90 %)

M2VF2 SPECIFICATIONS

ES-5055 Rev.12 Page 5/5

http://www.m-system.co.jp/

相关型号：