M2VF3-5W4W-R/Q [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2VF3-5W4W-R/Q
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总3页 (文件大小：105K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2VF3

-55 – +55 V DC

Super-mini Signal Conditioners Mini-M Series

-60 – +60 V DC

-300 – +300 V DC *

-350 – +350 V DC *

-400 – +400 V DC *

-600 – +600 V DC *

-800 – +800 V DC *

SIGNAL TRANSMITTER

(high-accuracy, ultra-high speed response 30 μsec.)

Functions & Features

• Converts DC input from a sensor into a standard process

signal

* Select ‘/N’ for ‘Standards & Approvals’ code.

Multiple installation bases are unable.

• Frequency characteristics 12 kHz (-3 dB)

• 30-microsecond response

OUTPUT

Typical Applications

Voltage

• Isolation for a vibration analyzing system

• Isolation for Discharge/Charge tester

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

POWER INPUT

23 (.91)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Model

(2.99)

[2] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

ZERO

SPAN

124

(4.88)

mm (inch)

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

MODEL: M2VF3–[1]4W–R[2]

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

ORDERING INFORMATION

• Code number: M2VF3-[1]4W-R[2]

Specify a code from below for each of [1] and [2].

(e.g. M2VF3-04W-R/CE/Q)

/C02: Polyurethane coating

/C03: Rubber coating

• Special input range (For code 0: e.g. -164 – +164 mV DC)

• Specify the specification for option code /Q

(e.g. /C01/S01)

TERMINAL SCREW MATERIAL

/S01: Stainless steel

GENERAL SPECIFICATIONS

Construction: Plug-in

[1] INPUT

Voltage

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

8W: -20 – +20 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (Select input range as indicated below)

-20 – +20 mV DC

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange input: -5 to +105 %

Zero adjustment: -1 to +1 %; multi-turn screwdriver

adjustments (front)

-24 – +24 mV DC

-40 – +40 mV DC

Span adjustment: 99 to 101 %; multi-turn screwdriver

adjustments (front)

-85 – +85 mV DC

-164 – +164 mV DC

Power LED: Green LED turns on when the power is supplied.

-200 – +200 mV DC

-15 – +15 V DC

-25 – +25 V DC

M2VF3 SPECIFICATIONS

ES-5107 Rev.7 Page 1/3

http://www.m-system.co.jp/

MODEL: M2VF3

INPUT SPECIFICATIONS

Input resistance: ≥ 1 MΩ (3 kΩ min. in power failure)

OUTPUT SPECIFICATIONS

Parallel load capacitance: ≤ 2000 pF

INSTALLATION

Power consumption

•DC: ≤ 0.6 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.01 %

Temp. coefficient: ±0.005 %/°C (±0.003 %/°F)

Frequency characteristics: 12 kHz, -3 dB

Response time: ≤ 30 µsec. (0 – 90 %)

Line voltage effect: ±0.01 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

Power LED

Zero Adj.

Span Adj.

M2VF3 SPECIFICATIONS

ES-5107 Rev.7 Page 2/3

http://www.m-system.co.jp/

MODEL: M2VF3

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 10 (.39)

84 (3.31)

114 (4.49)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Power

LED

Isolation

Output

Driver

Low Drift

Amplifier

–

SIGNAL SOURCE

OUTPUT

POWER

–

Base Socket

The M2VF3, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable to

prevent noise from entering through the input wiring.

• At input signal code "0", signal source is allocated between terminals 8 and 4

when input exceeds 300V.

SIGNAL SOURCE

–

Specifications are subject to change without notice.

M2VF3 SPECIFICATIONS

ES-5107 Rev.7 Page 3/3

http://www.m-system.co.jp/

相关型号：