M2XM2-1V2-R/N [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2XM2-1V2-R/N
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总4页 (文件大小：109K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2XM2

Super-mini Signal Conditioners Mini-M Series

[1] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

POTENTIOMETER TRANSMITTER

(PC programmable)

V1: Range -2.5 – +2.5 V DC

Functions & Features

V2: Range -10 – +10 V DC

• Provides a DC output proportional to a potentiometer or

slidewire position input

(Configurator software is used to change output over the

described range of the selected suffix code. For changing

out of this range, set the Output Range Selectors inside the

unit before software adjustment.)

• PC programmable

• Potentiometer’s zero/span points can be captured by on-

site calibrations

Typical Applications

[2] POWER INPUT

• Tank levels

AC Power

• Positions: Compensating non-linear signal from the linking

mechanism of a position detector

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(90 – 264 V for UL)

DC Power

23 (.91)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(2.99)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(110 V ±10 % for UL)

124

(4.88)

[3] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE or UL

mm (inch)

/CE: CE marking

/UL: UL approval, CE marking

Other Options

MODEL: M2XM2–1[1]–[2][3]

blank: none

/Q: Option other than the above (specify the specification)

ORDERING INFORMATION

• Code number: M2XM2-1[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M2XM2-1Z1-R/CE/Q)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Input range (e.g. 0 – 500 Ω)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/S01/SET)

/C02: Polyurethane coating

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

EX-FACTORY SETTING

INPUT POTENTIOMETER

1: Total resistance 100 Ω – 10 kΩ

(Configurator software is used to change input range

(total resistance).)

/SET: Preset according to the Ordering Information Sheet

(No. ESU-5093)

RELATED PRODUCTS

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

M2XM2 SPECIFICATIONS

ES-5093 Rev.10 Page 1/4

http://www.m-system.co.jp/

MODEL: M2XM2

Output range: -10 – +10 V DC

GENERAL SPECIFICATIONS

Construction: Plug-in

Minimum span: 1 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V1: 0 – 1 V DC

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -15 to +115 %

(Negative current output is not provided.)

Manual zero adjustments: -5 to +5 %

(factory setting: 0 %)

V2: 1 – 5 V DC

Manual span adjustments: 95 to 105 %

(factory setting: 100 %)

INSTALLATION

Power Consumption

Programming: Downloaded from PC; linearization (100

points), input range (total resistance), output range, zero

and span, simulating output, etc.

•AC:

Approx. 3 VA at 100 V

Approx. 4 VA at 200 V

Burnout: Upscale standard; downscale or no burnout

optional by programming

Approx. 5 VA at 264 V

•DC: Approx. 2 W

Status indicator LED: Blinking patterns indicate different

operating status of the transmitter.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Operating temperature: -30 to +60°C (-22 to +140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 120 g (0.26 lb)

INPUT SPECIFICATIONS

•Potentiometer: 100 Ω – 10 kΩ

Range : Minimum span

PERFORMANCE in percentage of span

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (% of max. input range)

(Range)

0 – 100 Ω : 2.5 Ω

0 – 300 Ω : 3.0 Ω

0 – 1000 Ω : 10 Ω

0 – 100 Ω : ±0.02 %

0 – 10 kΩ : 10 Ω

0 – 300 Ω : ±0.02 %

Excitation: ≤ 0.5 V DC at 1000 Ω

If not specified, default value is 1000 Ω.

0 – 1000 Ω : ±0.01 %

0 – 10 kΩ : ±0.02 %

Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span

at -5 to +55°C [23 to 131°F]

OUTPUT SPECIFICATIONS

■ DC Current

Response time: ≤ 0.9 sec. (0 – 90 %)

Burnout response time: ≤ 30 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Operational range: 0 – 24 mA DC

Output range: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 15 V max.

(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Input Type 0 – 1000 Ω, Input Range 250 – 750 Ω

,Output Type 0 – 20 mA, Output Range 4 – 20 mA

Max. Input Range (1000 Ω) ÷ Span (500 Ω) × 0.01 %

= 0.02 %

Code V1 (narrow spans)

Operational range: -3 – +3 V DC

Output range: -2.5 – +2.5 V DC

Minimum span: 250 mV

Max. Output Range (20 mA) ÷ Span (16 mA) × 0.04 %

= 0.05 %

Code V2 (wide spans)

Overall accuracy = 0.02 % + 0.05 % = ±0.07 %

Operational range: -11.5 – +11.5 V DC

M2XM2 SPECIFICATIONS

ES-5093 Rev.10 Page 2/4

http://www.m-system.co.jp/

MODEL: M2XM2

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

■ LEFT SIDE VIEW

(with cover removed)

■ FRONT VIEW (with cover open)

ATT

SW3

[e.g.]

Output code V1

Configurator Jack

Status Indicator LED

Zero/Span Selector

SW6

SW2

Top: SPAN

Middle: OFF

Bottom: ZERO

SW7

SW4

UP/DOWN Switches

Output Range Selectors

The front cover cannot be turned open by 180 deg.

when there is no extra space between units.

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

8–M3

SCREW

14 13

21.5 (.85) 7.3 (.29)

86.7 (3.41)

116.7 (4.59)

15 (.59)

[4 (.16)]

23 (.91)

• When mounting, no extra space is needed between units.

M2XM2 SPECIFICATIONS

ES-5093 Rev.10 Page 3/4

http://www.m-system.co.jp/

MODEL: M2XM2

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

ZERO/SPAN

SELECTOR

OUTPUT RANGE

SELECTORS

Isolation

POTENTIOMETER

max.

Digital

Computation

Output

Driver

Low Drift

Amplifier

& Burnout

OUTPUT

POWER

–

UP/DOWN

SWITCHES

–

U(+)

V(–)

min.

JACK

CONFIGURATOR

Base Socket

Specifications are subject to change without notice.

M2XM2 SPECIFICATIONS

ES-5093 Rev.10 Page 4/4

http://www.m-system.co.jp/

相关型号：