M2XUM-T2V1-P/Q [MSYSTEM]

Super-mini Signal Conditioners Mini-M Series;


型号：	M2XUM-T2V1-P/Q
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners Mini-M Series
文件：	总7页 (文件大小：183K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M2XUM

Current

Super-mini Signal Conditioners Mini-M Series

Z1: Range 0 – 50 mA DC (Input resistance 100 Ω)

Voltage

UNIVERSAL TRANSMITTER

(PC programmable; Modbus-RTU communication)

Functions & Features

S1: Range -1 – +1 V DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

Thermocouple

• Accepts direct inputs from various sensors and provides a

standard process signal

T1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

T2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

T3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

T4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

T5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

T6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

T7: R (Usable range -50 to +1760°C, -58 to +3200°F)

T8: S (Usable range -50 to +1760°C, -58 to +3200°F)

T9: C (WRe 5-26) (Usable range 0 to 2315°C, 32 to 4199°F)

TN: N (Usable range -270 to +1300°C, -454 to +2372°F)

TU: U (Usable range -200 to +400°C, -328 to +752°F)

TL: L (Usable range -200 to +900°C, -328 to +1652°F)

TP: P (Platinel II) (Usable range 0 to 1395°C, 32 to 2543°F)

T0: Specify (Please provide an emf table.)

RTD

• I/O types and calibration ranges are fully programmable

via a PC

• Linearization up to 100 points can be programmed for DC

and potentiometer inputs

• Isolation between input – output – RS-485 – power

Typical Applications

• Signal conversion between control room and field

instrumentation with isolation

• Ideal for use as a fast solution, multifunctional spare part

29.5 (1.16)

(2- or 3-wire)

Model

(2.99)

R1: JPt 100 (JIS'89)

(Usable range: -200 to +500°C, -328 to +932°F)

R3: Pt 100 (JIS'89)

(Usable range: -200 to +850°C, -328 to +1562°F)

R4: Pt 100 (JIS'97, IEC)

124

(4.88)

mm (inch)

(Usable range: -200 to +850°C, -328 to +1562°F)

R5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +649 °C, -328 to +1200°F)

R6: Ni 508.4 Ω

MODEL: M2XUM–[1][2]–[3][4]

(Usable range: -50 to +200°C, -58 to +392°F)

R7: Pt 1000

ORDERING INFORMATION

• Code number: M2XUM-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. M2XUM-00-M2/CE/Q)

(Usable range: -200 to +200°C, -328 to +392°F)

R8: Ni 100 (Usable range: -50 to +200°C, -58 to +392°F)

R9: Cu 10 @25°C

• Specify the specification for option code /Q

(e.g. /C01/S01)

(Usable range: -50 to +200°C, -58 to +392°F)

R0: Specify (Please provide a resistance table.)

Potentiometer

Non-specified orders will be shipped at default factory

settings (M2XUM-00: 4 – 20 mA input/4 – 20 mA output).

However, the power suffix code must be specified.

If you specify full code numbers without specific calibration

ranges, default settings will be used.

M: Total resistance 100 Ω – 10 kΩ

Note: Consult M-System for 2-wire RTD

[2] OUTPUT

0: User-calibrated (Factory default: 4 – 20 mA DC)

Note: Must be used with its socket. NOT installable to a

multi-unit installation base. (e.g. model: M2BS-16)

If the unit is to be factory-calibrated to a specific

output type, please select from the following:

Current

[1] INPUT

0: User-calibrated (Factory default: 4 – 20 mA DC)

Z1: Range 0 – 20 mA DC

Voltage

If the unit is to be factory-calibrated to a specific

input type, please select from the following:

V1: Range -2.5 – +2.5 V DC

V2: Range -10 – +10 V DC

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 1/7

http://www.m-system.co.jp/

MODEL: M2XUM

· Zero and span adjustments

[3] POWER INPUT

AC Power

· Simulated output

· User's linearization table (max. 100 points, specified within

-15 – +115 % for both input and output)

· User’s TC/RTD table

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

DC Power

Burnout (T/C, RTD and Pot.): Upscale standard; downscale

or no burnout options are PC programmable

Linearization (T/C, RTD input): Standard tables stored in

memory

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

Cold junction compensation (T/C): CJC sensor (included) to

be attached to the input terminals

[4] OPTIONS (multiple selections)

Standards & Approvals (must be specified)

/N: Without CE

Status indicator LED: Blinking patterns indicate different

operating status of the transmitter.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

/CE: CE marking

Other Options

blank: none

MODBUS COMMUNICATION

Standard: Conforms to TIA/EIA-485-A

Transmission distance: 500 meters max.

Baud rate: 38.4 kbps max.

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Communication: Half-duplex, asynchronous, no procedure

Protocol: Modbus RTU

/C02: Polyurethane coating

Transmission media: Shielded twisted-pair cable

(CPEV-S 0.9 dia.)

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

INPUT SPECIFICATIONS

■ DC Current: Shunt resistor attached to the input terminals

RELATED PRODUCTS

(0.5 W)

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

Operational range: 0 – 70 mA DC with 100 Ω, 0.5 W

Input range: 0 – 50 mA DC

Minimum span: 2 mA

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is 4 – 20 mA DC.

■ DC Voltage

Operational range: -11.5 – +11.5 V DC

Input range: -10 – +10 V DC

GENERAL SPECIFICATIONS

Construction: Plug-in

Minimum span: 10 mV for S1; 100 mV for S2

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

Connection: M3 screw terminals (torque 0.8 N·m)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to RS-485 to power

Overrange output: Approx. -15 to +115 %

(Negative current output is not provided.)

Manual zero adjustments: -5 to +5 %

(factory setting: 0 %)

S2: 1 – 5 V DC

■ Thermocouple

For T/C types K, E, T, B, R, S, N or U, the accuracy in the

temperature ranges near the lower limit may be out of the

described value. Consult M-System for more detail.

Input resistance: 1 MΩ min.

Manual span adjustments: 95 to 105 %

(factory setting: 100 %)

Burnout sensing: 45 nA ±10 %

Programming: PC programmable features include:

· T/C and RTD type and temp. range

· Input and output ranges

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 2/7

http://www.m-system.co.jp/

MODEL: M2XUM

If not specified, the input range is shown below.

T1 PR: 0 – 1600°C

Operational range: -11.5 – +11.5 V DC

Output range: -10 – +10 V DC

Minimum span: 1 V

T2 K: 0 – 1000°C

T3 E: 0 – 500°C

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

T4 J: 0 – 500°C

T5 T: 0 – 300°C

T6 B: 0 – 1800°C

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V1: 0 – 1 V DC

T7 R: 0 – 1600°C

T8 S: 0 – 1600°C

T9 C: 0 – 2000°C

TN N: 0 – 1000°C

V2: 1 – 5 V DC

TU U: 0 – 300°C

TL L: 0 – 500°C

INSTALLATION

Power Consumption

TP P: 0 – 1200°C

■ RTD

•AC: Approx. 6 VA

Maximum leadwire resistance: 200 Ω per wire (3 -wire)

Sensing current: ≤ 1.0 mA

If not specified, the input range is shown below.

R1: JPt 100 0 – 100°C

R3: Pt 100 0 – 100°C

R4: Pt 100 0 – 100°C

R5: Pt 50 Ω 0 – 200°C

R6: Ni 508.4 Ω 0 – 100°C

R7: Pt 1000 0 – 100°C

R8: Ni 100 0 – 100°C

R9: Cu 10 0 – 100°C

•DC: Approx. 3 W

Operating temperature: -30 to +60°C (-22 to +140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 120 g (0.26 lb)

PERFORMANCE

Accuracy: Input accuracy + output accuracy

Input accuracy (% of input range)

Inversely proportional to span.

(DC) -1 – +1 V : ±0.02

-10 – +10 V : ±0.02

0 – 50 mA : ±0.02

Except the input resistor error.

(T/C) (PR) : ±0.08

•Potentiometer: 100 Ω – 10 kΩ

Minimum span:

(Range) 0 – 100 Ω : 2.5 Ω

0 – 300 Ω : 3.0 Ω

0 – 1000 Ω : 10 Ω

K (CA) : ±0.02

0 – 10 kΩ : 10 Ω

E (CRC) : ±0.02

Excitation: ≤ 0.5 V DC at 1000 Ω

If not specified, the input range is 0 – 1000 Ω.

J (IC) : ±0.04

T (CC) : ±0.06

B (RH) : ±0.12

OUTPUT SPECIFICATIONS

■ DC Current

R : ±0.08

S : ±0.08

Operational range: 0 – 24 mA DC

Output range: 0 – 20 mA DC

Minimum span: 1 mA

C (WRe 5 - 26) : ±0.04

N : ±0.04

U : ±0.04

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

L : ±0.04

P (Platinel II) : ±0.04

(RTD) JPt 100 (JIS ’89) : ±0.04

Pt 100 (JIS ’89) : ±0.03

Pt 100 (JIS ’97, IEC) : ±0.03

Pt 50 Ω (JIS ’81) : ±0.04

Ni 508.4 Ω : ±0.05

Pt 1000 : ±0.08

Load resistance: Output drive 15 V max.

(e.g. 4 – 20 mA: 750 Ω [15 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Code V1 (narrow spans)

Operational range: -3 – +3 V DC

Output range: -2.5 – +2.5 V DC

Minimum span: 250 mV

Ni 100 : ±0.14

Cu 10 : ±0.6

(Pot.) 0 – 100 Ω : ±0.08

Code V2 (wide spans)

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 3/7

http://www.m-system.co.jp/

MODEL: M2XUM

0 – 300 Ω : ±0.04

0 – 1000 Ω : ±0.04

0 – 10 kΩ : ±0.04

Output accuracy: ±0.02 % of output range

Inversely proportional to span.

Cold junction compensation error:

±0.4°C or ±0.7°F (at 20°C ±10°C or 68°F ±18°F)

Temp. coefficient

(at -5 to +55°C [23 to 131°F] of I/O range)

Input: ±0.016 %/°C (±0.009 %/°F) with current

±0.004 %/°C (±0.002 %/°F) with voltage

±0.004 %/°C (±0.002 %/°F) with T/C

±0.004 %/°C (±0.002 %/°F) with RTD

±0.004 %/°C (±0.002 %/°F) with Pot.

Output: ±0.013 %/°C (±0.007 %/°F)

Response time:

≤ 0.5 sec.(0 – 90 %) with current

≤ 0.5 sec.(0 – 90 %) with voltage

≤ 1.5 sec.(0 – 90 %) with T/C

≤ 0.9 sec.(0 – 90 %) with RTD

≤ 0.9 sec. (0 – 90 %) with Pot.

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to RS-485 to power to ground)

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,

Output Type 0 – 20 mA, Output Range 0 – 10 mA

Max. Input Range (20 V) ÷ Span (4 V) × 0.02 % = 0.1 %

Max. Output Range (20 mA) ÷ Span (10 mA) × 0.02 % =

0.04 %

Overall accuracy = 0.1 + 0.04 = ±0.14 %

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 4/7

http://www.m-system.co.jp/

MODEL: M2XUM

EXTERNAL VIEW

■ FRONT VIEW (with cover open)

■ RIGHT SIDE VIEW

Address Setting Rotary SW

Configurator Jack

Input Range Selector

Position H: code S2, Z1

Position L : other

Status Indicator LED

Zero/Span Selector

Top: SPAN

Middle: OFF

Bottom: ZERO

Modbus Term. Resistor

: OFF

UP/DOWN Switches

: ON

The front cover cannot be opened to 180 deg.

when flush with neighboring units.

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS unit: mm (inch)

6 (.23)

DIN RAIL

35mm wide

2–4.2x5

(.17x.20)

MTG HOLE

6 (.24) deep

11–M3

SCREW

11 10

21.5 (.85) 7.3 (.29)

86.7 (3.41)

116.7 (4.59)

22 (.87)

[4 (.16)]

29.5 (1.16)

• When mounting, no extra space is needed between units.

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 5/7

http://www.m-system.co.jp/

MODEL: M2XUM

TERMINAL ASSIGNMENTS unit: mm (inch)

Use the input resistor (model: REM2) for a DC current input,

and the CJC sensor (model: CJM) for a thermocouple input,

both included in the package.

INPUT RESISTOR

(model: REM2)

CJC SENSOR

(model: CJM)

black

red

11 10

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

ADDRESS STATUS

T/C

ext. wire

RTD

POT.

INPUT RANGE

SELECTOR

ZERO/SPAN

SELECTOR

Isolation

max.

–

Digital

Computation

Output

Driver

–

Low Drift

Amplifier

& Burnout

OUTPUT

–

CJC

SENSOR

(model: CJM)

UP/DOWN

SWITCHES

–

red

U(+)

V(–)

Isolation

min.

COMM.

INTERFACE

black

RS-485

Interface

JACK

CONFIGURATOR

POWER

Base Socket

* Input shunt resistor attached for current input.

**When the module is at the end of RS-485 transmission line, turn on the Modbus

terminating resistor located behind the front cover, off when it is not.

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 6/7

http://www.m-system.co.jp/

MODEL: M2XUM

SYSTEM CONFIGURATION EXAMPLES

■ RS-232-C／RS-485

■ Ethernet／RS-485

RS-232-C

Ethernet

RS-232-C/RS-485 Converter

(Model: R2K-1 or LK1)

ETHERNET

Ethernet Communication Adaptor

(model: 72EM2-M4)

RS-485

RUN

SEND

FIELD

CNFG

RS-485

del

Mode

del

Universal Transmitters

(model: M2XUM)

Universal Transmitters

(model: M2XUM)

MODBUS COMMUNICATION PARAMETERS

Refer to the instruction manual for the details about Modbus communication.

■ COMMUNICATION PARAMETERS

PARAMETER

Data Mode

Baud Rate

Parity

SPECIFICATIONS

DEFAULT

MODIFICATION

RTU

Not modifiable

9600/19200/38400 bps

38400 bps

JXCON Software

None/Odd/Even

Odd

JXCON Software

Bit Length

Stop Bit

Not modifiable

Node Address

1 to 247

Hardware Rotary SW for 1 through 15,

JXCON Software for 16 through 247 (Rotary SW set to 0).

Floating Point Data

Physical Layer

Normal/Swapped

RS-485

Normal

RS-485

JXCON Software

Not modifiable

Specifications are subject to change without notice.

M2XUM SPECIFICATIONS

ES-5009 Rev.19 Page 7/7

http://www.m-system.co.jp/

M2XUM-T2V1-P/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E