M3SXM--1Z1-AD [MSYSTEM]

Super-space-saving Signal Conditioners M3S-UNIT Series;


型号：	M3SXM--1Z1-AD
厂家：	M-SYSTEM
描述：	Super-space-saving Signal Conditioners M3S-UNIT Series
文件：	总3页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M3SXM

Selector on the side of unit before software adjustment.)

Super-space-saving Signal Conditioners

M3S-UNIT Series

[2] POWER INPUT

AC Power

POTENTIOMETER TRANSMITTER

(PC programmable)

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

Functions & Features

DC Power

• Provides a DC output proportional to a potentiometer or

slidewire position input

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Universal

• Linearization and burnout protection

• PC programmable

AD: 100 – 240 V AC / 24 – 240 V DC (universal)

(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /

21.6 - 264 V DC, ripple 10 %p-p max.)

• Universal AC/DC power input

• High-density mounting

• Power and status indicator LED

[3] OPTIONS

blank: none

12 (.47)

/Q: With options (specify the specification)

106

(4.17)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

110.5 (4.35)

mm (inch)

/C03: Rubber coating

RELATED PRODUCTS

• PC configurator software (model: M3SCFG)

MODEL: M3SXM–1[1]–[2][3]

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

ORDERING INFORMATION

• Code number: M3SXM-1[1]-[2][3]

Specify a code from below for each [1] through [3].

(e.g. M3SXM-1Z1-R/Q)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

GENERAL SPECIFICATIONS

Construction: Small-sized front terminal structure

Connection: Euro type connector terminal

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Housing material: Flame-resistant resin (gray)

Isolation: Input to output to power

INPUT

1: Total resistance 100 – 5000 Ω

Overrange output: -2 – +102 %

(Configurator software is used to change the input range.)

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

[1] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table (max. 101 points, specified within -2 to

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

M3SXM SPECIFICATIONS

ES-7704 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: M3SXM

+102 % for both input and output), etc.

Refer to the instruction manual for details.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

•DC:

R: Approx. 0.5 W

AD: Approx. 1 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

INPUT SPECIFICATIONS

Sensing current: ≤ 0.15 mA

Minimum span of each range

0 – 100 Ω : 10 Ω

Weight: 85 g (3.0 oz)

PERFORMANCE in percentage of span

Accuracy: Input accuracy + output accuracy

(Inversely proportional to the span.)

Input accuracy: (% of range)

0 – 300 Ω : 30 Ω

0 – 600 Ω : 60 Ω

0 – 1200 Ω : 120 Ω

0 – 2500 Ω : 250 Ω

0 – 100 Ω : ±0.05 (%)

0 – 5000 Ω : 500 Ω

0 – 300 Ω : ±0.05

If not specified, the input range is 0 – 1200 Ω.

0 – 600 Ω : ±0.03

0 – 1200 Ω : ±0.03

0 – 2500 Ω : ±0.01

OUTPUT SPECIFICATIONS

■ DC Current

0 – 5000 Ω : ±0.01

Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span

Response time: ≤ 1 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Total Resistance 0 – 1200 Ω, Input Range 250 –

750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V

Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 % +

Max. Output Range (10 V) ÷ Span (4V) × 0.04 % = 0.17 %

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Output range: -5 – +5 V DC

STANDARDS & APPROVALS

EU conformity:

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

EMC Directive

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

V3: 1 – 5 V DC

INSTALLATION

Power consumption

•AC:

EN 50581

Approx. 2 VA at 100 V

Approx. 3 VA at 200 V

Approx. 4 VA at 264 V

M3SXM SPECIFICATIONS

ES-7704 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: M3SXM

EXTERNAL VIEW

Power LED

Output Range Selectors

OFF

SW1

Status Indicator LED

Configurator Jack

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

DIN RAIL

35mm wide

(.47)

110.5 (4.35)

[5 (.20)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS LED

DIP SW

Isolation

POTENTIOMETER

max.

Digital

Computation

Output

Driver

–

OUTPUT

POWER

Low Drift

Amplifier

POWER LED

–

min.

U(+)

V(–)

CONFIGURATOR

JACK

Specifications are subject to change without notice.

M3SXM SPECIFICATIONS

ES-7704 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：