M5VF-3A-R [MSYSTEM]

Super-mini Terminal Block Signal Conditioners M5-UNIT;


型号：	M5VF-3A-R
厂家：	M-SYSTEM
描述：	Super-mini Terminal Block Signal Conditioners M5-UNIT
文件：	总3页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M5VF

Super-mini Terminal Block Signal Conditioners M5-UNIT

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

(Not selectable with the power input code M)

Voltage

SIGNAL TRANSMITTER

(high speed response)

Functions & Features

• Converts a DC input into an isolated DC signal

• Ultra-high speed response 150 μsec.

• High-density mounting

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 8000 Ω min.)

(For the input suffix codes 4W and 5W only)

5W: -5 – +5 V DC (Load resistance 4000 Ω min.)

(For the input suffix codes 4W and 5W only)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

(Not selectable with the power input code M)

• Power LED

25 (.98)

(3.82)

[3] POWER INPUT

41 (1.61)

AC Power

mm (inch)

M: 85 – 264 V AC (Operational voltage range 85 – 264 V,

47 – 66 Hz)

(CE not available)

MODEL: M5VF-[1][2]-[3][4]

DC Power

R: 24 V DC

ORDERING INFORMATION

• Code number: M5VF-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M5VF-4W4W-R/Q)

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/V01/S01)

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

[1] INPUT

Current

/C02: Polyurethane coating

A: 4 – 20 mA DC (Input resistance 249 Ω)

B: 2 – 10 mA DC (Input resistance 499 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 49.9 Ω)

E: 0 – 16 mA DC (Input resistance 61.9 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 20 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

/C03: Rubber coating

ADJUSTMENT

/V01: Multi-turn fine adjustment

TERMINAL SCREW MATERIAL

/S01: Stainless steel

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

M5VF SPECIFICATIONS

ES-2464 Rev.14 Page 1/3

http://www.m-system.co.jp/

MODEL: M5VF

GENERAL SPECIFICATIONS

Construction: Terminal block

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

±0.02 %/°C (±0.01 %/°F) with AC power

Response time: ≤ 150 μsec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: Approx. -10 to +110 % at 1 – 5 V

Zero adjustment: -2 to +2 % (front)

(±1 % with the input suffix codes 4W and 5W selected)

Span adjustment: 98 to 102 % (front)

(99 to 101 % with the input suffix codes 4W and 5W

selected.)

AC powered: 1500 V AC @1 minute

STANDARDS & APPROVALS

EU conformity:

Power LED: Green LED turns on when the power is supplied.

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value among followings for code Z.

20Ω, 49.9Ω, 61.9Ω, 100Ω, 249Ω, 499Ω, 1000Ω

EN 50581

(0.125 W ≥ [Input current] × R)

■ DC Voltage: -30 – +30 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Input resistance: 1 MΩ min.

(10 kΩ min. at power loss)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.; 9 V max. for the

full-scale output < 3 mA

■ DC Voltage: 0 – 10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; at ≥ 1 V

INSTALLATION

Power Consumption

•AC:

Approx. 2 VA at 100 V

Approx. 2 VA at 200 V

Approx. 3 VA at 264 V

•DC: Approx. 2 W

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 0 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 80 g (2.8 oz)

M5VF SPECIFICATIONS

ES-2464 Rev.14 Page 2/3

http://www.m-system.co.jp/

MODEL: M5VF

FRONT VIEW

Power LED

Span Adj.

Zero Adj.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7.3 (.29)

8–M3.5 SCREW

DIN RAIL

35mm wide

25 (.98)

41 (1.61)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

SIGNAL SOURCE

OUTPUT

POWER

POWER LED

U(+)

V(–)

*Input shunt resistor incorporated for current input.

The M5VF, by its fast-response feature, is not designed to eliminate noise present in the input signal.

Use a shielded twisted-pair cable for preventing noise entering through the input wiring.

Specifications are subject to change without notice.

M5VF SPECIFICATIONS

ES-2464 Rev.14 Page 3/3

http://www.m-system.co.jp/

相关型号：