M60SWVS [MSYSTEM]
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series;型号: | M60SWVS |
厂家: | M-SYSTEM |
描述: | Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series |
文件: | 总4页 (文件大小:189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M60SWVS
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series
OUTPUT 1 – Field-selectable
Current
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
SIGNAL TRANSMITTER
(field-configurable, two isolated outputs)
Functions & Features
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
• Converts DC input from a sensor into a standard process
signal
• Output range and response time selectable with DIP SW
• Power connector for interconnecting modules and
collectively supplying power
OUTPUT 2 – Field-selectable
Current
• Spring clamp terminal connection for easy wiring
• 6-mm wide ultra-slim design
4 – 20 mA DC (Load resistance 300 Ω max.)
0 – 20 mA DC (Load resistance 300 Ω max.)
Voltage
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
• Power indicator LED
8 (.31)
POWER INPUT
DC Power
R: 24 V DC
108 (4.25)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[1] OPTIONS
blank: none
102 (4.02)
/Q: Options other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: M60SWVS-R[1]
/C02: Polyurethane coating
ORDERING INFORMATION
• Code number: M60SWVS-R[1]
Specify a code from below for [1].
(e.g. M60SWVS-R/Q)
GENERAL SPECIFICATIONS
Connection
• Specify the specification for option code /Q
(e.g. /C01)
Input and output: Spring clamp terminal
Power input: Via the power connector or the spring clamp
terminal
• Default at shipment
Input range: 4 – 20 mA DC
Applicable wire size: 0.2 to 1.5 mm , stripped length 8 mm
2
Output 1 range: 4 – 20 mA DC
Output 2 range: 4 – 20 mA DC
Response time: Standard response
Housing material: Flame-resistant resin (black)
Isolation: Input to output 1 to output 2 to power
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Adjustable individually for each output 1 and output 2.
Power LED: Green LED turns on when the power is supplied.
INPUT – Field-selectable
Current
4 – 20 mA DC (Input resistance 50 Ω)
0 – 20 mA DC (Input resistance 50 Ω)
Voltage
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
0 – 10 V DC (Input resistance 200 kΩ min.)
2 – 10 V DC (Input resistance 200 kΩ min.)
0 – 5 V DC (Input resistance 100 kΩ min.)
1 – 5 V DC (Input resistance 100 kΩ min.)
INSTALLATION
Power consumption: 0.7 W max.
Power input: 3 A (Total current consumed by the
M60SWVS SPECIFICATIONS
ES-8023 Rev.1 Page 1/4
http://www.m-system.co.jp/
MODEL: M60SWVS
interconnected signal conditioners must be 3 A or less.)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 65 g (2.3 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
I/O setting accuracy: ±0.2 %
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
Response time (0 – 90 %): selectable with DIP SW
Standard: ≤ 500 msec.
Fast: ≤ 5 msec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute
(input to output 1 to output 2 to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
Refer to the instruction manual for the setting procedure.
■ LEFT SIDE VIEW
■ FRONT VIEW (with the front cover removed)
DIP SW for setting
output 1 range
SW1
On
1 2 3 4 5 6
Power LED
DIP SW for setting
various functions
SW1
Output 1 Zero adj.
Output 1 Span adj.
Output 2 Zero adj.
Output 2 Span adj.
SW3
On
1 2 3 4
SW3
SW2
DIP SW for setting
output 2 range
SW2
On
1 2 3 4 5 6
M60SWVS SPECIFICATIONS
ES-8023 Rev.1 Page 2/4
http://www.m-system.co.jp/
MODEL: M60SWVS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
(Test lead pin 1 dia.)
5
6
7
8
DIN rail
(35mm wide)
1
2
3
4
2.1 (.08)
6 (.24)
2 (.08)
0.5 (.02)
3.7 (.15)
6 (.24)
102 (4.02)
• With the end cover attached
• Capable of High-density mounting
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
DIP SW for setting
various functions
DIP SW for setting
output range
Z
S
Output 1
Driver
Low Drift
Amplifier
+
−
+
−
3
4
5
6
*
INPUT
OUTPUT 1
DIP SW for setting
output range
Z
S
Output 2
Driver
+
−
1
2
OUTPUT 2
POWER
Power LED
+
−
7
8
POWER
* Input shunt resistor incorporated for current input.
M60SWVS SPECIFICATIONS
ES-8023 Rev.1 Page 3/4
http://www.m-system.co.jp/
MODEL: M60SWVS
Specifications are subject to change without notice.
M60SWVS SPECIFICATIONS
ES-8023 Rev.1 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明