M6DVS-05W-R [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DVS-05W-R
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总4页 (文件大小：121K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DVS

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

SIGNAL TRANSMITTER

Functions & Features

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

D: 0 – 20 mA DC (Load resistance 550 Ω max.)

G: 0 – 1 mA DC (Load resistance 11 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

• Galvanically isolates process instrumentation signals

• High-density mounting

• Power indicator LED

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 20 kΩ min.)

5W: -5 – +5 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

5.9 (.23)

(3.70)

102

(4.02)

[3] POWER INPUT

mm (inch)

AC Power

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

(UL not available)

DC Power

MODEL: M6DVS-[1][2]-[3][4]

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

ORDERING INFORMATION

• Code number: M6DVS-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M6DVS-4W4W-R/K/UL/Q)

[4] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

/K: Fast Response (Approx. 3.5 msec. voltage output;

Approx. 25 msec. current output)

Standards & Approvals

blank: CE marking

[1] INPUT

Current

/UL: UL approval, CE marking

Other Options

A: 4 – 20 mA DC (Input resistance 50 Ω)

B: 2 – 10 mA DC (Input resistance 100 Ω)

C: 1 – 5 mA DC (Input resistance 200 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 50 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 20 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

M6DVS SPECIFICATIONS

ES-7822 Rev.11 Page 1/4

http://www.m-system.co.jp/

MODEL: M6DVS

(not available for AC power input)

or Euro terminal (torque 0.3 N·m)

Applicable wire size: 0.2 to 2.5 mm

STANDARDS & APPROVALS

EU conformity:

2, stripped length 8 mm

EMC Directive

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

EMI EN 61000-6-4

EMS EN 61000-6-2

Zero adjustment: -2 to +2 % (front)

Low Voltage Directive

(Output code 4W, 5W: Adjustable at 0V. No output below

0 mA for the code D.)

EN 61010-1

Installation Category II

Span adjustment: 98 to 102 % (front)

Pollution Degree 2

Power LED: Green light turns on when the power is supplied.

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

INPUT SPECIFICATIONS

EN 50581

■ DC Current: Input resistor incorporated

Specify input resistance value among followings for code Z.

20Ω, 50Ω, 100Ω, 200Ω, 249Ω, 1000Ω

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(0.125 W ≥ [Input current] × R)

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

■ DC Voltage: -30 – +30 V DC

Minimum span: 100 mV

Offset: Max. 1.5 times span

Input resistance: 1 MΩ min. (10 kΩ min. with no power

supplied)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage: 0 – 10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 1 V

INSTALLATION

Power Consumption

•AC: Max. 2 VA

•DC: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 60 g (2.1 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

M6DVS SPECIFICATIONS

ES-7822 Rev.11 Page 2/4

http://www.m-system.co.jp/

MODEL: M6DVS

EXTERNAL VIEW

(With the cover open)

Power LED

Zero Adj.

Span Adj.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

M6DVS SPECIFICATIONS

ES-7822 Rev.11 Page 3/4

http://www.m-system.co.jp/

MODEL: M6DVS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

INPUT

OUTPUT

POWER

POWER LED

U(+)

V(–)

POWER

* Input shunt resistor incorporated for current input.

** Available only for DC power input type

Specifications are subject to change without notice.

M6DVS SPECIFICATIONS

ES-7822 Rev.11 Page 4/4

http://www.m-system.co.jp/

相关型号：