M6DXAP-S2P-R/Q [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DXAP-S2P-R/Q
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总4页 (文件大小：136K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DXAP

Output modulation type and range are configurable with the

configure software. The output signal type is configurable

with the DIP switches.

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

DC/FREQUENCY CONVERTER

(PC programmable)

POWER INPUT

Function & features

DC Power

• Converts a DC input into a FM (frequency modulation) or

PWM (pulse width modulated) signal

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

• PC programmable

• High-density mounting

/Q: With options (specify the specification)

• Power and status indicator LEDs

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

5.9 (.23)

/C02: Polyurethane coating

(3.70)

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7837)

102

(4.02)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

mm (inch)

MODEL: M6DXAP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6DXAP-[1][2]-R[3]

Specify a code from below each [1] through [3].

(e.g. M6DXAP-Z1A-R/Q)

GENERAL SPECIFICATIONS

Connection

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

or Euro terminal (torque 0.3 N·m)

• Specify the specification for option code /Q

(e.g. /C01/SET)

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC

• Input type and range

[1] INPUT

Current

Z1: Range 0 – 50 mA DC (Input resistance 25 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

• Modulation type (FM, PWM)

• Output range

[2] OUTPUT

• Zero and span

A: Open collector (100 kHz for FM, 1 kHz for PWM)

M: 5 V pulse (100 kHz for FM, 1 kHz for PWM)

N: 12 V pulse (100 kHz for FM, 1 kHz for PWM)

P: 24 V pulse (100 kHz for FM, 1 kHz for PWM)

• User’s linearization table (max. 101 points, specified

within -2 to +102 %)

• Others

M6DXAP SPECIFICATIONS

ES-7837 Rev.4 Page 1/4

http://www.m-system.co.jp/

MODEL: M6DXAP

(Refer to the instruction manual for details)

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Factory default: 0 to 10 kHz, Frequency modulation

INSTALLATION

Power consumption: Approx. 1 W

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 65 g (2.3 oz)

Minimum span: 2 mA

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

PERFORMANCE in percentage of span

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

•Code S1 (narrow spans)

Input accuracy in percentage of input span:

• ±0.01 % for -1000 to +1000 mV

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

• ±0.01 % for -10 to +10 V

•Code S2 (wide spans)

• ±0.02 % for 0 to 50 mA

Input range: -10 – +10 V DC

Output accuracy at max. frequency (FM):

• ±0.10 % for ≤ 10 kHz

Minimum span: 1 V

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

• ±0.05 % for ≤ 5 kHz

• ±0.02 % for ≤ 1 kHz

• For 10 kHz to 100 kHz output accuracy is following.

Output accuracy (%) = Max. frequency (kHz) x 0.01

Output accuracy (PWM): ±0.2 %

S2: 1 – 5 V DC

See CALCULATION EXAMPLES OF OVERALL ACCURACY.

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. input

span

OUTPUT SPECIFICATIONS

■ Modulation

• Frequency modulation

Response time: 0.1 sec. + 1 pulse cycle of 100 % output

The time between the moment when the input changes 0 %

to 100 % and the moment when the first pulse changes.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Output range: 0 to 100 %

Max. frequency: 100 kHz

Min. span: 0.01 Hz

(The output frequency changes according to the input

signal. Duty rate is approx. 50 %)

• Pulse width modulation

Output range: 1 to 99 %

Usable frequency: 0.008 Hz to 1 kHz

(According to the input signal, the output pulse width (duty

rate) changes without change of its frequency. The

frequency is configurable with PC Configurator software,

M6CFG.).

CALCULATION EXAMPLES OF OVERALL ACCURACY

1. Frequency modulation

E.g.: Input range -10 to +10 V, input span 1 to 5 V, max.

frequency 10 kHz

Input accuracy = Input range (20 V) ÷ Input span (4 V) x

Input accuracy (0.01 %) = 0.05 %

Output accuracy = 0.10 %

■ Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 100 kHz

Saturation voltage: 0.5 V DC

(Factory default: 0 to 10 kHz, frequency modulation)

■ Voltage Pulse

Overall accuracy = ±0.15 %

2. Pulse width modulation

E.g.: Input range -10 to +10 V, input span 1 to 5 V,

frequency 1 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5 V

Input accuracy = 0.05 % (same as above)

Output accuracy = 0.20 %

Load resistance:

Overall accuracy = ±0.25 %

• ≥ 1.0 kΩ for 5 V

• ≥ 2.4 kΩ for 12 V

• ≥ 4.8 kΩ for 24 V

M6DXAP SPECIFICATIONS

ES-7837 Rev.4 Page 2/4

http://www.m-system.co.jp/

MODEL: M6DXAP

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

Output Range Selectors

The output signal type is configurable with the DIP switches. Refer to the installation manual for detailed procedure.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

M6DXAP SPECIFICATIONS

ES-7837 Rev.4 Page 3/4

http://www.m-system.co.jp/

MODEL: M6DXAP

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

IND. LED

Isolation

DIP SW

25 Ω

Digital

Computation

Output

Driver

CURRENT

(Z1)

OUTPUT

POWER

Low Drift

Amplifier

–

VOLTAGE

(S1, S2)

POWER LED

–

CONFIGURATOR

JACK

POWER

Output Connection Examples

■ Open Collector

■ Voltage Pulse

–

Specifications are subject to change without notice.

M6DXAP SPECIFICATIONS

ES-7837 Rev.4 Page 4/4

http://www.m-system.co.jp/

相关型号：