M6DXF3 [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DXF3
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总5页 (文件大小：135K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DXF3

(Configurator software is used to change input over the

described range of the selected suffix code.

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

For changing between suffix codes, set the Input Range

Selector on the side of unit before software adjustment.)

HOLD FUNCTION MODULE

(PC programmable)

Functions & Features

[2] OUTPUT

Current

• Track/Hold or Peak hold function’s selection available

• 5.9-mm wide ultra-slim design with DC current signal

input

Z1: Range 0 – 20 mA DC

Voltage

• Low profile allows the M6D module to be mounted in a

120-mm deep panel

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

• PC programmable

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

• High-density mounting available

• Power and status indicator LEDs

Typical Applications

• Monitoring peak power consumption

• Monitoring the highest or lowest temperature

• Capturing signals from a composite analyzer performing

on each sample in turn

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

5.9 (.23)

[3] OPTIONS

blank: none

(3.70)

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

102

(4.02)

/C02: Polyurethane coating

mm (inch)

FUNCTIONS

PC Configurator Software is used to change function type.

MODEL: M6DXF3–[1][2]–R[3]

• Track/Hold

• Peak hold

Peak hold

ORDERING INFORMATION

• Code number: M6DXF3-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6DXF3-Z1Z1-R/Q)

Valley hold

Peak-to-peak hold (Peak hold-Valley hold)

Factory default setting

Control/Hold: Track/Hold

Control/Control Logic: Hold at open

• Input range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

[1] INPUT

Current

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

M6DXF3 SPECIFICATIONS

ES-7849 Rev.4 Page 1/5

http://www.m-system.co.jp/

MODEL: M6DXF3

GENERAL SPECIFICATIONS

Connection

OUTPUT SPECIFICATIONS

■ DC Current

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

or Euro terminal (torque 0.3 N·m)

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Applicable wire size: 0.2 to 2.5 mm

, stripped length 8 mm

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: -2 – +102 %

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, function type, control

input logic, user’s linearization table (max. 101 points,

specified within -2 to +102% for both input and output), etc.

For detailed information, refer to the users manual for the

PC configurator.

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Output range: -5 – +5 V DC

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

V3: 1 – 5 V DC

Minimum span: 2 mA

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 65 g (2.3 oz)

•Code S1 (narrow spans)

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

•Code S2 (wide spans)

Input range: -10 – +10 V DC

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Minimum span: 1 V

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (% of max. input range)

-1000 – +1000 mV : ±0.01 %

S2: 1 – 5 V DC

-10 – +10 V : ±0.01 %

• Control

0 – 50 mA : ±0.02 %

Contact rating: 3 V @1 mA

• Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 90 %)

Detection levels:

≤ 0.6 kΩ / 0.5 V at close

≥ 15 kΩ / 2.5 V at open

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

M6DXF3 SPECIFICATIONS

ES-7849 Rev.4 Page 2/5

http://www.m-system.co.jp/

MODEL: M6DXF3

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,

Output Type -5 – +5 V, Output Range 1 – 5 V

• Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×

0.01 % = 0.05 %

• Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)

× 0.04 % = 0.1 %

Accuracy= ±0.15 %

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Output Range Selectors

Power LED

Status Indicator LED

Configurator Jack

Input Range Selectors

The DIP switch setting is required to select input and output

types before setting a precise range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

M6DXF3 SPECIFICATIONS

ES-7849 Rev.4 Page 3/5

http://www.m-system.co.jp/

MODEL: M6DXF3

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

IND. LED

DIP SW

Isolation

Digital

Computation

Output

Driver

–

OUTPUT

POWER

–

Low Drift

Amplifier

24.9 Ω

+3 V

INPUT

POWER LED

–

3 kΩ

CONTROL

POWER

CONFIGURATOR

JACK

M6DXF3 SPECIFICATIONS

ES-7849 Rev.4 Page 4/5

http://www.m-system.co.jp/

MODEL: M6DXF3

FUNCTIONS

■ CONTROL LOGIC

The control input can be chosen either hold at open or hold at close by using the PC Configurator Software.

For detailed information on the PC Configuration, refer to the M6CFG users manual.

■ TRACK/HOLD

When the control input is TRACK, the output follows proportionally to the input.

When the control input turns to HOLD, the output at the point of command is held indefinitely.

■ PEAK HOLD

• Peak hold

When the control input is TRACK, the output follows proportionally to the input.

When the control input is HOLD, the output is held at the maximum input value.

When the maximum input value is updated, the output changes to that value.

• Valley hold

When the control input is TRACK, the output follows proportionally to the input.

When the control input is HOLD, the output is held at the minimum input value.

When the minimum input value is updated, the output changes to that value.

• Peak-to-peak hold

When the control input is TRACK, the output follows proportionally to the input.

When the control input is HOLD, the output is held at the maximum peak-to-peak input value (max. value – min. value).

For example, the output is 20% if the maximum input value is 60% and the minimum input value is 40%.

When the maximum peak-to-peak input value is updated, the output changes to that value.

Specifications are subject to change without notice.

M6DXF3 SPECIFICATIONS

ES-7849 Rev.4 Page 5/5

http://www.m-system.co.jp/

相关型号：