M6DXU-T3R5-M2/Q [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DXU-T3R5-M2/Q
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总6页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DXU

T1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

T2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

T3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

T4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

T5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

T6: B (RH) (Usable range 100 to 1820°C, 212 to 3308°F)

T7: R (Usable range -50 to +1760°C, -58 to +3200°F)

T8: S (Usable range -50 to +1760°C, -58 to +3200°F)

TN: N (Usable range -270 to +1300°C, -454 to +2372°F)

T0: Specify (Please provide an emf table.)

RTD

UNIVERSAL TRANSMITTER

(PC programmable)

Functions & Features

• Universal input (mV, V, mA, T/C, RTD and potentiometer)

5.9-mm ultra-slim transmitter

• Low profile allows the M6D module mounted in a 120-mm

deep panel.

• PC programmable

• High-density mounting

(2- , 3- or 4-wire)

• Power indicator LED

R1: JPt 100 (JIS'89)

(Usable range: -200 to +500°C, -328 to +932°F)

R3: Pt 100 (JIS'89)

5.9 (.23)

(Usable range: -200 to +650°C, -328 to +1202°F)

R4: Pt 100 (JIS'97, IEC)

(Usable range: -200 to +850°C, -328 to +1562°F)

R5: Pt 50 Ω (JIS'81)

(3.70)

(Usable range: -200 to +649 °C, -328 to +1200°F)

R7: Pt 1000

(Usable range: -200 to +850°C, -328 to +1562°F)

R9: Cu 10 @25°C

102

(4.02)

mm (inch)

(Usable range: -50 to +250°C, -58 to +482°F)

R0: Specify (Please provide a resistance table.)

Potentiometer

M1: Total resistance 100 – 5000 Ω

(Configurator software is used to change input over the

described range of the selected suffix code.

For changing between suffix codes, set the Input Range

Selector on the side of unit before software adjustment.)

MODEL: M6DXU–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M6DXU-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M6DXU-Z1Z1-M2/Q)

[2] OUTPUT

0: User-calibrated (Factory default: 4 – 20 mA DC)

Non-specified orders will be shipped as default factory

settings (M6DXU-00: 4 – 20 mA input/4 – 20 mA output).

• Input range (e.g. 4 – 20 mA DC)

If the unit is to be factory-calibrated to a specific

output type, please select from the following:

Current

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

[1] INPUT

0: User-calibrated (Factory default: 4 – 20 mA DC)

V3: Range -5 – +5 V DC

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

If the unit is to be factory-calibrated to a specific

input type, please select from the following:

Current

Z1: Range 0 – 50 mA DC (Input resistance 17 Ω)

Voltage

[3] POWER INPUT

AC Power

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

Thermocouple

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

M6DXU SPECIFICATIONS

ES-7853 Rev.5 Page 1/6

http://www.m-system.co.jp/

MODEL: M6DXU

DC Power

PC configurator.

R: 24 V DC

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Minimum span: 2 mA

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

/C02: Polyurethane coating

•Code S1 (narrow spans)

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

•Code S2 (wide spans)

Input range: -10 – +10 V DC

Minimum span: 1 V

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

S2: 1 – 5 V DC

GENERAL SPECIFICATIONS

Connection

■ Thermocouple

Input resistance: ≥ 1 MΩ

Burnout sensing: ≤ 3 μA

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

(not available for AC power input)

or Euro terminal (torque 0.3 N·m)

Minimum span: 20°C or 36°F

If not specified, the input range is shown below.

T1 PR: 0–1600°C

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

T2 K: 0–1000°C

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

T3 E: 0–500°C

T4 J: 0–500°C

Overrange output: -2 – +102 %

T5 T: 0–300°C

(Negative current output is not available.)

T6 B: 500–1600°C

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout (thermocouple, RTD & potentiometer input):

Upscale standard; downscale or no burnout

optional by programming

T7 R: 500–1600°C

T8 S: 0–1600°C

TN N: 0–1000°C

■ RTD: 2- , 3- or 4-wire RTD

Maximum leadwire resistance: 10 Ω per wire

Sensing current: ≤ 1.0 mA

Minimum span: 20°C or 36°F

Resistance range:

Linearization (thermocouple & RTD input): Standard

Cold Junction Compensation (thermocouple input): CJC

sensor incorporated

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type,

linearization table, (max. 101 points, specified within -2 –

+102% for both input and output), user’s TC/RTD table

(max. 300 points, specified within -1000 to +1000 mV for

TC or 0 to 20 kΩ for RTD), etc.

0 - 500 Ω (Input code: 1, 3, 4, 5, 9)

0 - 5 kΩ (Input code: 7)

If not specified, the input range is 100°C.

■ Potentiometer

Sensing current: ≤ 1.0 mA

Minimum span

0 – 100 Ω : 10 Ω

0 – 300 Ω : 30 Ω

0 – 600 Ω : 60 Ω

For detailed information, refer to the users manual for the

0 – 1200 Ω : 120 Ω

M6DXU SPECIFICATIONS

ES-7853 Rev.5 Page 2/6

http://www.m-system.co.jp/

MODEL: M6DXU

0 – 2500 Ω : 250 Ω

input): ≤ 10 s

0 – 5000 Ω : 500 Ω

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

If not specified, the input range is 0 – 1200 Ω.

OUTPUT SPECIFICATIONS

■ DC Current

Output range: 0 – 20 mA DC

Accuracy

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

• DC voltage or current

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (% of range)

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

-1000 – +1000 mV : ±0.01 %

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

-10 – +10 V : ±0.01 %

0 – 50 mA : ±0.02 % (Except the accuracy of input resistor.)

Output accuracy: ±0.04% of max. output range

[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,

Output Type -5 – +5 V, Output Range 1 – 5 V

Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×

0.01 % = 0.05 %

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)

× 0.04 % = 0.1 %

Code V3 (narrow spans)

Output range: -5 – +5 V DC

Accuracy= ±0.15 %

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

• Thermocouple

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Overall accuracy: Input accuracy + output accuracy

Input accuracy: Accuracy + Cold Junction Compensation

Error 3°C (5.4°F)

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

Output accuracy: Max. Output Range ÷ Span × ±0.04%

T/C

(PR)

ACCURACY (°C)

±1.00

CONFORMANCE RANGE (°C)

0 – 1760

V3: 1 – 5 V DC

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

±0.25

-150 – +1370

-170 – +1000

-180 – +1200

-170 – +400

400 – 1760

±0.20

±0.25

INSTALLATION

Power Consumption

±0.25

±0.75

•AC: Max. 2 VA

±0.50

200 – 1760

•DC: Approx. 0.5 W

±0.50

0 – 1760

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 65 g (2.3 oz)

±0.30

-130 – +1300

T/C

ACCURACY (°F)

±1.80

CONFORMANCE RANGE (°F)

32 – 3200

(PR)

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

±0.45

-238 – +2498

-274 – +1832

-292 – +2192

-274 – +752

PERFORMANCE in percentage of span

Cold junction compensation error (thermocouple input):

±3°C at 25 ±10°C

±0.36

±0.45

±5.4°F at 77 ±18°F

±1.35

752 – 3200

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: (0 – 90 %)

±0.90

392 – 3200

±0.90

32 – 3200

DC voltage or current: ≤ 0.5 s

±0.54

-202 – +2372

Thermocouple, RTD, potentiometer: ≤ 1 s

Burnout response time (thermocouple, RTD, potentiometer

[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC

ES-7853 Rev.5 Page 3/6

M6DXU SPECIFICATIONS

http://www.m-system.co.jp/

MODEL: M6DXU

output

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

Absolute accuracy in °C: 0.25°C (see the above table)

CJC error (3°C) added: 3.25°C

➠ Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %

Output span: 16 mA (20 – 4)

EN 50581

➠ Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %

➠ Overall accuracy including CJC error = 0.325 + 0.05 =

±0.38 % of span

• RTD

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (whichever is greater)

±0.1 % of input range or ±0.15°C (Pt and JPt)

±1°C (Cu 10)

Output accuracy: ±0.04% of max. output range

[Example] Pt 100, 0 – 100°C, Output Type -5 – +5V, Output

Range 1 – 5V

Input Accuracy* (0.15°C**) ÷ Span (100°C) × 100 %

+ Max. Output Range (10V) ÷ Span (4V) × 0.04 %

= ±0.25 %

* Calculate the accuracy in °C.

** 100°C × 0.1 % = 0.1°C ≤ 0.15°C. 0.15°C is used as input

accuracy value.

• Potentiometer

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (% of range)

0 – 100 Ω : ±0.05 %

0 – 300 Ω : ±0.05 %

0 – 600 Ω : ±0.03 %

0 – 1200 Ω : ±0.03 %

0 – 2500 Ω : ±0.01 %

0 – 5000 Ω : ±0.01 %

Output accuracy: ±0.04% of max. output range

[Example] Total Resistance 0 – 1200 Ω, Input Range 250–

750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V

Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 %

+ Max. Output Range (10 V) ÷ Span (4 V) × 0.04 %

= ±0.18 %

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

M6DXU SPECIFICATIONS

ES-7853 Rev.5 Page 4/6

http://www.m-system.co.jp/

MODEL: M6DXU

EXTERNAL VIEW

■ FRONT VIEW (with the cover open)

■ SIDE VIEW

DIP switches for configuration

Power LED

Status Indicator LED

Configurator Jack

The DIP switch setting is required to select input and output

types before setting a precise range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

M6DXU SPECIFICATIONS

ES-7853 Rev.5 Page 5/6

http://www.m-system.co.jp/

MODEL: M6DXU

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

T/C

RTD

POT.

DIP SW

CJC

SENSOR

STATUS LED

comp. leadwire

Isolation

Output

Driver

3-wire

4-wire

2-wire

max.

Digital

Computation

–

Current Input (Z1)

–

OUTPUT

POWER

–

Low Drift

Amplifier

17Ω

Voltage Input (S1, S2)

POWER LED

U (+)

V (–)

–

min.

JACK

CONFIGURATOR

POWER

*1. Input shunt resistor incorporated for current input.

*2. CJC sensor incorporated for thermocouple input.

*3. Available only for DC power input type

Specifications are subject to change without notice.

M6DXU SPECIFICATIONS

ES-7853 Rev.5 Page 6/6

http://www.m-system.co.jp/

M6DXU-T3R5-M2/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E