M6DXV-Z1Z1-R [MSYSTEM]

Euro Terminal Ultra-Slim Signal Conditioners M6D Series;


型号：	M6DXV-Z1Z1-R
厂家：	M-SYSTEM
描述：	Euro Terminal Ultra-Slim Signal Conditioners M6D Series
文件：	总4页 (文件大小：134K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6DXV

V3: Range -5 – +5 V DC

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

(Configurator software is used to change output over the

described range of the selected suffix code.

SIGNAL TRANSMITTER

(PC programmable)

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

Functions & Features

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

POWER INPUT

DC Power

R: 24 V DC

• Converts a DC input into a standard process signal

• PC programmable

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• High-density mounting

• Power indicator LED

[3] OPTIONS (multiple selections)

Standards & Approvals

5.9 (.23)

blank: CE marking

/UL: UL approval, CE marking

Other Options

(3.70)

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

102

(4.02)

mm (inch)

/C02: Polyurethane coating

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7832)

MODEL: M6DXV–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6DXV-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6DXV-Z1Z1-R/UL/Q)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

• Input range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

Specify the specification for option code /Q

(e.g. /C01/SET)

GENERAL SPECIFICATIONS

Connection

[1] INPUT

Current

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

or Euro terminal (torque 0.3 N·m)

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: -2 – +102 %

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

[2] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

M6DXV SPECIFICATIONS

ES-7832 Rev.9 Page 1/4

http://www.m-system.co.jp/

MODEL: M6DXV

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, user’s linearization

table (max. 101 points, specified within -2 to +102% for

both input and output), etc.

maintained.

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

For detailed information, refer to the users manual for the

PC configurator.

V3: 1 – 5 V DC

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

INSTALLATION

Power consumption: Approx. 0.5 W

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6DBS) or DIN rail

Weight: 65 g (2.3 oz)

Minimum span: 2 mA

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

•Code S1 (narrow spans)

See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (% of max. input range)

-1000 – +1000 mV : ±0.01 %

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

•Code S2 (wide spans)

-10 – +10 V : ±0.01 %

Input range: -10 – +10 V DC

0 – 50 mA : ±0.02 %

Minimum span: 1 V

• Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 90 %)

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

S2: 1 – 5 V DC

OUTPUT SPECIFICATIONS

■ DC Current

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,

Output Type -5 – +5 V, Output Range 1 – 5 V

• Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×

0.01 % = 0.05 %

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

• Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)

× 0.04 % = 0.1 %

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Accuracy= ±0.15 %

STANDARDS & APPROVALS

EU conformity:

Code V2 (wide spans)

EMC Directive

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

Code V3 (narrow spans)

EN 50581

Output range: -5 – +5 V DC

Approval:

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

M6DXV SPECIFICATIONS

ES-7832 Rev.9 Page 2/4

http://www.m-system.co.jp/

MODEL: M6DXV

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

Output Range Selectors

The DIP switch setting is required to select output types

before setting a precise output range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

WIRE INSERTION ANGLE: approx. 7°

8–M3

EURO TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

M6DXV SPECIFICATIONS

ES-7832 Rev.9 Page 3/4

http://www.m-system.co.jp/

MODEL: M6DXV

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

IND. LED

DIP SW

Isolation

24.9Ω

Digital

Computation

Output

Driver

–

CURRENT

(Z1)

OUTPUT

Low Drift

Amplifier

–

VOLTAGE

(S1, S2)

POWER LED

–

POWER

CONFIGURATOR

JACK

Specifications are subject to change without notice.

M6DXV SPECIFICATIONS

ES-7832 Rev.9 Page 4/4

http://www.m-system.co.jp/

相关型号：