M6NPA-A14-R/UL [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NPA-A14-R/UL
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总4页 (文件大小：136K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NPA

4W: -10 – +10 V DC (Load resistance 20 kΩ min.)

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

5W: -5 – +5 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

FREQUENCY TRANSMITTER

Functions & Features

POWER INPUT

DC Power

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Converts the output from a pulse-type transducer into a

standard process signal

• High-density mounting

[3] OPTIONS (multiple selections)

Standards & Approvals

• Power indicator LED

blank: CE marking

/UL: UL approval, CE marking

Other Options

7.5 (.30)

blank: none

/Q: Option other than the above (specify the specification)

102

(4.02)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

102

(4.02)

mm (inch)

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

MODEL: M6NPA–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6NPA-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6NPA-CA-R/UL/Q)

Applicable wire size: 0.2 – 2.5 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

• Frequency range (e.g. 0 – 1 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

Zero adjustment: -2 to +2 % (front)

(Output code 4W, 5W: Adjustable at 0V.)

Span adjustment: 98 to 102 % (front)

Chattering protection: Filter provided for mechanical

contact input

[1] INPUT

A1: Open collector

Power LED: Green light turns on when the power is supplied.

■Recommended solderless terminal (unit: mm (inch))

A2: Mechanical contact

C: 5 V pulse (sensitivity 2 V)

D: 24 V pulse (sensitivity 10 V)

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

INPUT SPECIFICATIONS

■ Open Collector

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

Frequency range: 0 – 0.01 Hz through 100 kHz

Pulse width time requirement: ≥ 4 µsec. for both H and L

M6NPA SPECIFICATIONS

ES-7904 Rev.9 Page 1/4

http://www.m-system.co.jp/

MODEL: M6NPA

levels

STANDARDS & APPROVALS

EU conformity:

Sensing voltage/current: 2.5 V DC @1 mA (approx.)

Detecting levels: ≤ 750 Ω/0.75 V for ON;

≥ 3 kΩ/1.6 V for OFF

EMC Directive

EMI EN 61000-6-4

■ Mechanical Contact

EMS EN 61000-6-2

Frequency range: 0 – 0.01 Hz through 30 Hz

Pulse width time requirement: ≥ 10 msec. for both ON and

OFF

RoHS Directive

EN 50581

Approval:

Sensing voltage/current: 2.5 V DC @1 mA (approx.)

Detecting levels: ≤ 750 Ω/0.75 V for ON;

≥ 3 kΩ/1.6 V for OFF

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D hazardous locations

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

■ Voltage Pulse

Frequency range: 0 – 0.01 Hz through 100 kHz

Pulse width time requirement: ≥ 4 µsec. for both H and L

levels

Waveform: Square or sine

Input impedance: ≥ 10 kΩ

Max. voltage between input terminals: ±50 V

Detecting H level

5 V pulse: ≥ 3 V

24 V pulse: ≥ 14 V

Detecting L level

5 V pulse: ≤ 1 V

24 V pulse: ≤ 6 V

OUTPUT SPECIFICATIONS

■ DC Current: 2 – 20 mA DC (and 0 – 1 mA DC)

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 11 V max.

■ DC Voltage: 0 – 10 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 1 V

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 60 g (2.1 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Max. 0.5 sec. + 1 pulse cycle (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

M6NPA SPECIFICATIONS

ES-7904 Rev.9 Page 2/4

http://www.m-system.co.jp/

MODEL: M6NPA

EXTERNAL VIEW

(With the cover open)

Power LED

Zero Adj.

Span Adj.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

M6NPA SPECIFICATIONS

ES-7904 Rev.9 Page 3/4

http://www.m-system.co.jp/

MODEL: M6NPA

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Digital

Computation

Voltage

Amplifier

Output

Driver

–

INPUT

OUTPUT

POWER LED

–

POWER

Input Connection Examples

■ Open Collector or Mechanical Contact

2.5 V

■ Voltage Pulse

2.4 kΩ

–

Specifications are subject to change without notice.

M6NPA SPECIFICATIONS

ES-7904 Rev.9 Page 4/4

http://www.m-system.co.jp/

相关型号：