M6NPP-DA1N-R [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NPP-DA1N-R
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总5页 (文件大小：148K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NPP

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

[3] OUTPUT LOGIC

N: The same as the input

R: Inverted

PULSE ISOLATOR

Functions & Features

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

POWER INPUT

DC Power

R: 24 V DC

• Galvanically isolates pulse rate signals

• High-density mounting

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Power indicator and input monitor LED

[4] OPTIONS

blank: none

Typical Applications

/Q: With options (specify the specification)

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

7.5 (.30)

/C02: Polyurethane coating

102

(4.02)

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

102

(4.02)

mm (inch)

Applicable wire size: 0.2 – 2.5 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

MODEL: M6NPP–[1][2][3]–R[4]

Chattering protection: Filter provided for mechanical

contact input

ORDERING INFORMATION

• Code number: M6NPP-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. M6NPP-CMN-R/Q)

Power LED: Green light turns on when the power is supplied.

Input monitor LED

Open collector, Mechanical contact: Orange LED turns

on when the input is ON.

• Specify the specification for option code /Q

(e.g. /C01)

Voltage pulse, 2-wire current pulse: Orange LED turns

on when the input is high.

Input pulse sensing: DC coupled

[1] INPUT

A1: Open collector

■Recommended solderless terminal (unit: mm (inch))

A2: Mechanical contact

C: 5 V pulse (sensitivity 2 V)

D: 12 V/24 V pulse (sensitivity 5 V)

H: Two-wire current pulse

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

[2] OUTPUT

A1: High frequency open collector (max. 100 kHz)

A2: Low frequency open collector (max. 30 Hz)

M: 5 V pulse

INPUT SPECIFICATIONS

Excitation: 12 V DC @20 mA, shortcircuit protection

■ Open Collector

N: 12 V pulse

Maximum frequency: 100 kHz

P: 24 V pulse

Pulse width time requirement: ≥ 5 μsec. for ON and OFF

M6NPP SPECIFICATIONS

ES-7919 Rev.6 Page 1/5

http://www.m-system.co.jp/

MODEL: M6NPP

Sensing: Approx. 11 V DC @2.4 mA

Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF

■ Mechanical Contact

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 60 g (2.1 oz)

Maximum frequency: 30 Hz

PERFORMANCE

Pulse width time requirement: ≥ 10 msec. for ON and OFF

Sensing: Approx. 11 V DC @2.4 mA

Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF

■ Voltage Pulse

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Maximum frequency: 100 kHz

Pulse width time requirement: ≥ 5 μsec. for high and low

levels

STANDARDS & APPROVALS

EU conformity:

EMC Directive

Waveform: Square or sine

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

Input impedance: ≥ 10 kΩ

Max. voltage between input terminals: 50 V

Detecting H level

EN 50581

5 V pulse: ≥ 3 V

12 V, 24 V pulse: ≥ 6 V

Detecting L level

5 V pulse: ≤ 1 V

12 V, 24 V pulse: ≤ 4 V

■ Two-wire Current Pulse

Max. frequency: 100 kHz

Input resistance: Receiving resistor 200 Ω

Input range: 0 – 25 mA

Detecting levels: ≤ 5 mA for Lo, ≥ 15 mA for Hi

OUTPUT SPECIFICATIONS

■ High Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 100 kHz

Saturation voltage: 0.5 V DC

■ Low Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits ≥ 75 msec. within 75 ±25 msec.

ON time for output logic non-inverted

OFF time for output logic inverted

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 100 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5 V

Load resistance:

≥ 1.0 kΩ for 5 V

≥ 2.4 kΩ for 12 V

≥ 4.8 kΩ for 24 V

INSTALLATION

Power consumption: Approx. 1 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

M6NPP SPECIFICATIONS

ES-7919 Rev.6 Page 2/5

http://www.m-system.co.jp/

MODEL: M6NPP

EXTERNAL VIEW

(With the cover open)

Power LED

Input Monitor LED

OUTPUT LOGIC

VOLTAGE PULSE

OUTPUT

OPEN COLLECTOR

OUTPUT

INPUT TYPE

PULSE LOGIC

Non Inverted

INPUT

OFF

Voltage Pulse Input

2-wire Current Pulse

Input

OFF

Inverted

Non Inverted

Inverted

OFF

Mechanical Contact Input

Open Collector Input

OFF

M6NPP SPECIFICATIONS

ES-7919 Rev.6 Page 3/5

http://www.m-system.co.jp/

MODEL: M6NPP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

M6NPP SPECIFICATIONS

ES-7919 Rev.6 Page 4/5

http://www.m-system.co.jp/

MODEL: M6NPP

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

INPUT MONITOR LED

Isolation

Waveform

Shaper

Output

Driver

–

Timer

INPUT

OUTPUT

SENSOR EXCITATION

POWER

LED

12 V Supply

POWER

* Low freq. open collector output only.

Input Connection Examples

Output Connection Examples

■ Mechanical Contact or Open Collector

■ Open Collector

■ 2-Wire Current Pulse

• Built-in Excitation

–

200 Ω

–

2-WIRE

PICK-UP

+12V

PWR

+12V

5 kΩ

■ Voltage Pulse

–

• External DC Supply

–

200 Ω

–

2-WIRE

PICK-UP

+12V

PWR

–

+12V

DC SUPPLY

Specifications are subject to change without notice.

M6NPP SPECIFICATIONS

ES-7919 Rev.6 Page 5/5

http://www.m-system.co.jp/

相关型号：