M6NVF-5W4W-R/Q [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NVF-5W4W-R/Q
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总3页 (文件大小：127K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NVF

-40 – +40 mV DC

-85 – +85 mV DC

-164 – +164 mV DC

-200 – +200 mV DC

-15 – +15 V DC

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

SIGNAL TRANSMITTER

(high-accuracy, ultra-high speed response 30 μsec.)

Functions & Features

-25 – +25 V DC

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

-55 – +55 V DC

-60 – +60 V DC

• Galvanically isolates process instrumentation signals

• 30-microsecond response

OUTPUT

Voltage

• Frequency characteristics 12 kHz (-3 dB)

• High-density mounting

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

• Power indicator LED

POWER INPUT

DC Power

Typical Applications

• Isolation for a vibration analyzing system

• Isolation for Discharge/Charge tester

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

7.5 (.30)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

102

(4.02)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

102

(4.02)

/C02: Polyurethane coating

mm (inch)

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

MODEL: M6NVF–[1]4W–R[2]

ORDERING INFORMATION

• Code number: M6NVF-[1]4W-R[2]

Specify a code from below for each [1] and [2].

(e.g. M6NVF-04W-R/Q)

Applicable wire size: 0.2 – 2.5 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

• Special input range (For code 0: e.g. -164 – +164 mV DC)

• Specify the specification for option code /Q

(e.g. /C01)

Overrange input: -5 to +105 %

Zero adjustment: -1 to +1 % (front)

Span adjustment: 99 to 101 % (front)

[1] INPUT

Voltage

Power LED: Green light turns on when the power is supplied.

■Recommended solderless terminal (unit: mm (inch))

2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

8W: -20 – +20 V DC (Input resistance 1 MΩ min.)

0: Specify voltage

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

(Select input range as indicated below. Input resistance 1 MΩ min.)

-20 – +20 mV DC

-24 – +24 mV DC

M6NVF SPECIFICATIONS

ES-7924 Rev.4 Page 1/3

http://www.m-system.co.jp/

MODEL: M6NVF

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min. (3 kΩ min. at power loss)

OUTPUT SPECIFICATIONS

Parallel load capacitance: Max. 2000 pF

INSTALLATION

Power consumption: Approx. 0.6 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 60 g (2.1 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.01 %

Temp. coefficient: ±0.005 %/°C (±0.003 %/°F)

Frequency characteristics: 12 kHz, -3 dB

Response time: ≤ 30 µsec. (0 – 90 %)

Line voltage effect: ±0.01 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

(With the cover open)

Power LED

Zero Adj.

Span Adj.

M6NVF SPECIFICATIONS

ES-7924 Rev.4 Page 2/3

http://www.m-system.co.jp/

MODEL: M6NVF

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

SIGNAL

SOURCE

OUTPUT

POWER LED

–

POWER

This unit, by its fast-response feature, is not designed to eliminate noise present in the input signal.

Use a shielded twisted-pair cable to prevent noise from entering through the input wiring.

Specifications are subject to change without notice.

M6NVF SPECIFICATIONS

ES-7924 Rev.4 Page 3/3

http://www.m-system.co.jp/

相关型号：