M6NXAP-Z1A-R [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NXAP-Z1A-R
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总4页 (文件大小：149K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NXAP

Output modulation type and range are configurable with the

configure software. The output signal type is configurable

with the DIP switches.

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

DC/FREQUENCY CONVERTER

(PC programmable)

POWER INPUT

Function & features

DC Power

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Converts a DC input into a FM (frequency modulation) or

PWM (pulse width modulated) signal

• PC programmable

[3] OPTIONS

blank: none

• High-density mounting

/Q: With options (specify the specification)

• Power and status indicator LEDs

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

7.5 (.30)

/C02: Polyurethane coating

EX-FACTORY SETTING

102

(4.02)

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7837)

RELATED PRODUCTS

102

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

(4.02)

mm (inch)

MODEL: M6NXAP–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6NXAP-[1][2]-R[3]

Specify a code from below each [1] through [3].

(e.g. M6NXAP-Z1A-R/Q)

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

• Specify the specification for option code /Q

(e.g. /C01/SET)

[1] INPUT

Applicable wire size: 0.2 – 2.5 mm

Current

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Z1: Range 0 – 50 mA DC (Input resistance 25 Ω)

Voltage

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC

• Input type and range

[2] OUTPUT

A: Open collector (100 kHz for FM, 1 kHz for PWM)

M: 5 V pulse (100 kHz for FM, 1 kHz for PWM)

N: 12 V pulse (100 kHz for FM, 1 kHz for PWM)

P: 24 V pulse (100 kHz for FM, 1 kHz for PWM)

• Modulation type (FM, PWM)

• Output range

• Zero and span

M6NXAP SPECIFICATIONS

ES-7926 Rev.4 Page 1/4

http://www.m-system.co.jp/

MODEL: M6NXAP

• User’s linearization table (max. 101 points, specified

within -2 to +102 %)

Maximum frequency: 100 kHz

Saturation voltage: 0.5 V DC

(Factory default: 0 to 10 kHz, frequency modulation)

■ Voltage Pulse

• Others

(Refer to the instruction manual for details)

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5 V

■Recommended solderless terminal (unit: mm (inch))

Load resistance:

• ≥ 1.0 kΩ for 5 V

5.5 max.

(.22)

4 min.

(.16)

• ≥ 2.4 kΩ for 12 V

3.2 (.13) dia.

• ≥ 4.8 kΩ for 24 V

Factory default: 0 to 10 kHz, Frequency modulation

INSTALLATION

Power consumption: Approx. 1 W

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 65 g (2.3 oz)

Minimum span: 2 mA

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

PERFORMANCE in percentage of span

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

•Code S1 (narrow spans)

Input accuracy in percentage of input span:

• ±0.01 % for -1000 to +1000 mV

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

• ±0.01 % for -10 to +10 V

•Code S2 (wide spans)

• ±0.02 % for 0 to 50 mA

Input range: -10 – +10 V DC

Output accuracy at max. frequency (FM):

• ±0.10 % for ≤ 10 kHz

Minimum span: 1 V

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

• ±0.05 % for ≤ 5 kHz

• ±0.02 % for ≤ 1 kHz

• For 10 kHz to 100 kHz output accuracy is following.

Output accuracy (%) = Max. frequency (kHz) x 0.01

Output accuracy (PWM): ±0.2 %

S2: 1 – 5 V DC

See CALCULATION EXAMPLES OF OVERALL ACCURACY.

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. input

span

OUTPUT SPECIFICATIONS

■ Modulation

• Frequency modulation

Response time: 0.1 sec. + 1 pulse cycle of 100 % output

The time between the moment when the input changes 0 %

to 100 % and the moment when the first pulse changes.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

Output range: 0 to 100 %

Max. frequency: 100 kHz

Min. span: 0.01 Hz

(The output frequency changes according to the input

signal. Duty rate is approx. 50 %)

• Pulse width modulation

Output range: 1 to 99 %

Usable frequency: 0.008 Hz to 1 kHz

(According to the input signal, the output pulse width (duty

rate) changes without change of its frequency. The

frequency is configurable with PC Configurator software,

M6CFG.).

CALCULATION EXAMPLES OF OVERALL ACCURACY

1. Frequency modulation

E.g.: Input range -10 to +10 V, input span 1 to 5 V, max.

frequency 10 kHz

Input accuracy = Input range (20 V) ÷ Input span (4 V) x

Input accuracy (0.01 %) = 0.05 %

■ Open Collector

50 V DC @ 100 mA (resistive load)

Output accuracy = 0.10 %

M6NXAP SPECIFICATIONS

ES-7926 Rev.4 Page 2/4

http://www.m-system.co.jp/

MODEL: M6NXAP

Overall accuracy = ±0.15 %

2. Pulse width modulation

E.g.: Input range -10 to +10 V, input span 1 to 5 V,

frequency 1 kHz

Input accuracy = 0.05 % (same as above)

Output accuracy = 0.20 %

Overall accuracy = ±0.25 %

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

Output Range Selectors

The output signal type is configurable with the DIP switches. Refer to the installation manual for detailed procedure.

M6NXAP SPECIFICATIONS

ES-7926 Rev.4 Page 3/4

http://www.m-system.co.jp/

MODEL: M6NXAP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

IND. LED

Isolation

DIP SW

25 Ω

Digital

Computation

Output

Driver

CURRENT

(Z1)

OUTPUT

POWER

Low Drift

Amplifier

–

VOLTAGE

(S1, S2)

POWER LED

–

CONFIGURATOR

JACK

POWER

Output Connection Examples

■ Open Collector

■ Voltage Pulse

–

Specifications are subject to change without notice.

M6NXAP SPECIFICATIONS

ES-7926 Rev.4 Page 4/4

http://www.m-system.co.jp/

相关型号：