M6NXAT-0-R/Q [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NXAT-0-R/Q
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总5页 (文件大小：160K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NXAT

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

OUTPUT

Relay; SPDT or transfer contact

THERMOCOUPLE ALARM

(PC programmable)

POWER INPUT

Functions & Features

DC Power

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• PC programmable

[2] OPTIONS

blank: none

• Linearization and upscale and downscale burnout

protection

/Q: With options (specify the specification)

• High-density mounting

• Power and status indicator LEDs

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

7.5 (.30)

/C02: Polyurethane coating

102

(4.02)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

102

(4.02)

mm (inch)

MODEL: M6NXAT–[1]–R[2]

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

ORDERING INFORMATION

• Code number: M6NXAT-[1]-R[2]

Specify a code from below for each [1] and [2].

(e.g. M6NXAT-2-R/Q)

• Temperature range (e.g. 0 – 1000°C)

• Specify the specification for option code /Q

(e.g. /C01)

Applicable wire size: 0.2 – 2.5 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Burnout: Upscale standard; downscale or no burnout

optional by programming

[1] INPUT THERMOCOUPLE

1: (PR)

In case of upscale standard, the alarm operates as if the

input signal has exceeded over the range.

Linearization: Standard

2: K (CA)

3: E (CRC)

4: J (IC)

Cold Junction Compensation: CJC sensor incorporated

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Alarm monitor LED: Red LED turns on when the alarm is

tripped.

5: T (CC)

6: B (RH)

7: R

8: S

N: N

0: Specify (Please provide a emf table.)

(Configurator software is used to change the input type and

precise range.)

Programming: Downloaded from PC

Input type and range

Input fine adjustments

User’s Thermocouple table

M6NXAT SPECIFICATIONS

ES-7922 Rev.4 Page 1/5

http://www.m-system.co.jp/

MODEL: M6NXAT

Burnout (Upscale, downscale or no burnout)

Alarm setpoint (input %)

Alarm Trip Operation Terminal No. in parentheses

• Setting Example

Hi alarm (coil energized at alarm) or

Lo alarm (coil de-energized at alarm)

Trip action (High or Low)

Relay coil (energized or de-energized)

Power ON delay time (0 to 999 sec.)

Alarm ON delay time (0 to 999 sec.)

Hysteresis (deadband) (input %)

Alarm test, and others

(3–2)ON

Output

(3–4)ON

Input

(%)

100

Setpoint

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Trip operation in power failure: Terminals 3 – 4 turn ON.

Factory default setting

Alarm setpoint: 80 %

INSTALLATION

Power consumption: Approx. 0.5 W

Trip action: High

Relay coil at alarm: Energized

Power ON delay time: 5 sec.

Alarm ON delay time: 0 sec.

Hysteresis (deadband) : 1.0 %

Burnout: Upscale

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 65 g (2.3 oz)

■Recommended solderless terminal (unit: mm (inch))

PERFORMANCE in percentage of span

Setpoint accuracy (trip point accuracy):

Accuracy in Table 1 + Cold junction compensation error

Cold junction compensation error:

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

±3°C at 25 ±10°C

±5.4°F at 77 ±18°F

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 100 % at 90 % setpoint)

Burnout response time: ≤ 1 sec.

INPUT SPECIFICATIONS

Input resistance: 1 MΩ min.

Burnout sensing: ≤ 0.1 μA

Temperature range: See Table 1.

If not specified, the input range is shown below.

1 PR: 0 – 1600°C

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

2 K: 0 – 1000°C

3 E: 0 – 500°C

4 J: 0 – 500°C

5 T: 0 – 300°C

6 B: 500 – 1600°C

7 R: 500 – 1600°C

8 S: 0 – 1600°C

N N: 0 – 1000°C

OUTPUT SPECIFICATIONS

■ Relay Output

Relay rating:

250 V AC @2 A (cos ø = 1)

30 V DC @2 A (resistive load)

Maximum switching voltage: 250 V AC or 125 V DC

Maximum switching power: 500 VA or 60 W

Minimum load: 5 V DC @100 mA

Mechanical life: 5 × 10 cycles (rate 180/min.)

M6NXAT SPECIFICATIONS

ES-7922 Rev.4 Page 2/5

http://www.m-system.co.jp/

MODEL: M6NXAT

CALCULATION EXAMPLES OF SETPOINT ACCURACY

[Example] K thermocouple, 0 – 1000°C

Absolute value accuracy (Table 1): 0.25°C

CJC error (3°C) added: 3.25°C

Setpoint accuracy = 3.25°C ÷ 1000°C × 100 = 0.33 %

Table 1.

THERMOCOUPLE

MIN.

MAXIMUM

RANGE

CONFORMANCE

RANGE

ACCURACY

SPAN

(PR)

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

0 to 1760

1.00

0.25

0.20

0.25

0.75

0.50

0.30

-270 to +1370 -150 to +1370

-270 to +1000 -170 to +1000

-210 to +1200 -180 to +1200

-270 to +400 -170 to +400

100 to 1820 400 to 1760

-50 to +1760 200 to 1760

-50 to +1760

0 to 1760

-270 to +1300 -130 to +1300

THERMOCOUPLE

MIN.

MAXIMUM

RANGE

CONFORMANCE

RANGE

ACCURACY

SPAN

(PR)

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

32 to 3200

1.80

0.45

0.36

0.45

1.35

0.90

0.54

-454 to +2498 -238 to +2498

-454 to +1832 -274 to +1832

-346 to +2192 -292 to +2192

-454 to +752 -274 to +752

212 to 3308 752 to 3200

-58 to +3200 392 to 3200

-58 to +3200

32 to 3200

-454 to +2372 -202 to +2372

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (output)

Pollution Degree 2

Input or power to output: Reinforced insulation (300 V)

Input to power: Basic insulation (300 V)

RoHS Directive

EN 50581

M6NXAT SPECIFICATIONS

ES-7922 Rev.4 Page 3/5

http://www.m-system.co.jp/

MODEL: M6NXAT

EXTERNAL VIEW

(With the cover open)

Power LED

Alarm Monitor LED

Status Indicator LED

Configurator Jack

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

M6NXAT SPECIFICATIONS

ES-7922 Rev.4 Page 4/5

http://www.m-system.co.jp/

MODEL: M6NXAT

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS ALARM

CJC

LED

MONITOR LED

SENSOR

comp. leadwire

–

T/C

Digital

Computation

Low Drift

Amplifier

OUTPUT

COM

POWER LED

–

POWER

JACK

CONFIGURATOR

■ Relay Protection

• AC Powered

• DC Powered

Inductive

Load (Coil)

Inductive

Load (Coil)

LOAD

Diode, Varistor or

CR Circuit

Varistor or CR Circuit

Specifications are subject to change without notice.

M6NXAT SPECIFICATIONS

ES-7922 Rev.4 Page 5/5

http://www.m-system.co.jp/

相关型号：