M6NXF2-S2Z1-R [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Seriesv;


型号：	M6NXF2-S2Z1-R
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Seriesv
文件：	总5页 (文件大小：159K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NXF2

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

[3] OUTPUT

Current

Z1: Range 0 – 20 mA DC

Voltage

2-INPUT MATH FUNCTION MODULE

(PC programmable)

V2: Range -10 – +10 V DC

Functions & Features

V3: Range -5 – +5 V DC

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

(Configurator software is used to change the output type

and precise range.)

• 2-input math functions and signal selector functions

• PC programmable

POWER INPUT

• High-density mounting

DC Power

• Power indicator LED

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

7.5 (.30)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

102

(4.02)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

102

(4.02)

/C02: Polyurethane coating

mm (inch)

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7848)

MODEL: M6NXF2-[1][2][3]-R[4]

FUNCTIONS

PC Configurator Software is used to change function type.

ORDERING INFORMATION

• Code number: M6NXF2-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. M6NXF2-S2Z1Z1-R/Q)

Math Functions:

Temperature compensation (w/o square root extraction)

Temperature compensation (with square root extraction)

Pressure compensation (w/o square root extraction)

Pressure compensation (with square root extraction)

Addition / Subtraction

• Input 1 range (e.g. 1 – 5 V DC)

• Input 2 range (e.g. 4 – 20 mA DC)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

Multiplication

Division

Signal Selector Functions:

High selector

[1] INPUT 1

Current

Low selector

Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)

Voltage

RELATED PRODUCTS

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

(Configurator software is used to change the input type and

precise range.)

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

[2] INPUT 2

Same range availability as Input 1

(Configurator software is used to change the input type and

precise range.)

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 1/5

http://www.m-system.co.jp/

MODEL: M6NXF2

S2: 1 – 5 V DC

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

OUTPUT SPECIFICATIONS

■ DC Current

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Applicable wire size: 0.2 – 2.5 mm

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Housing material: Flame-resistant resin (black)

Isolation: Input 1 or input 2 to output to power

(Negative sides of the input 1 and 2 must be of the same

potential.)

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Overrange output: -2 – +102 %

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, function type and

parameters, etc.

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Output range: -5 – +5 V DC

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

For detailed information, refer to the users manual for the

PC configurator.

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

■Recommended solderless terminal (unit: mm (inch))

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

V3: 1 – 5 V DC

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 65 g (2.3 oz)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Minimum span: 2 mA

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

See CALCULATION EXAMPLES OF OVERALL ACURACY

• Input accuracy*: (% of max. input range)

-1000 – +1000 mV : ±0.05 %

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

•Code S1 (narrow spans)

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

-10 – +10 V : ±0.05 %

0 – 50 mA : ±0.1 %

•Code S2 (wide spans)

• Output accuracy**: ±0.04% of max. output range

Input range: -10 – +10 V DC

Minimum span: 1 V

*Inversely proportional to the span.

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

For math functions, the input accuracy equals that of either

input 1 or 2, whichever is greater, with the following

parameter setting:

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 2/5

http://www.m-system.co.jp/

MODEL: M6NXF2

=1, A

=0%, X

=100% for temp./press. compensation

=0.5, K

=1, A

=A =A =0% for four arithmetic functions

For selector functions, it equals that of the selected signal.

**Inversely proportional to the span.

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Function: Temperature compensation w/o square

root extraction; K

=1, A

=0%, X =100%

Input 1: Type -10 – +10 V / range 1 – 5 V

Input 2: Type 0 – 50 mA / range 4 – 20 mA

Output: Type 0 – 20 mA / range 4 – 20 mA

Input 1 = Max. Input Range (20 V) ÷ Span (4 V) × 0.05% =

0.25%

Input 2 = Max. Input Range (50 mA) ÷ Span (16 mA) ×

0.1% = 0.31%

Output = Max. Output Range (20 mA) ÷ Span (16 mA) ×

0.04% = 0.05%

Accuracy = 0.31% (input 2 > input 1) + 0.05% = 0.36%

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Output Range Selectors

Power LED

Status Indicator LED

Configurator Jack

Input Range Selectors

The DIP switch setting is required to select input and output

types before setting a precise range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 3/5

http://www.m-system.co.jp/

MODEL: M6NXF2

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

IND. LED

OUTPUT

DIP SW

INPUT

DIP SW

Isolation

Digital

Computation

Output

Driver

–

OUTPUT

POWER

24.9 Ω

INPUT 1

Low Drift

Amplifier

POWER LED

–

24.9 Ω

INPUT 2

CONFIGURATOR

JACK

POWER

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 4/5

http://www.m-system.co.jp/

MODEL: M6NXF2

FUNCTIONS

■ FUNCTIONS

• Math Functions

Temperature compensation (w/o square root extraction)

K1X1

X0 = ––––––––––

√K2X2 + A2

where

X0 : Compensated flow (linear characteristics)

X1 : Uncompensated flow

X2 : Temperature

Temperature compensation (with square root extraction)

K1√ X1

X0 = ––––––––––

√K2X2 + A2

where

X0 : Compensated flow (linear characteristics)

X1 : Uncompensated flow

X2 : Temperature

Pressure compensation (w/o square root extraction)

X0 = K1X1√K2X2 + A2

where

X0 : Compensated flow (linear characteristics)

X1 : Uncompensated flow

X2 : Pressure

Pressure compensation (with square root extraction)

X0 = K1√ X1√K2X2 + A2

where

X0 : Compensated flow (linear characteristics)

X1 : Uncompensated flow

X2 : Pressure

Addition / Subtraction

X0 = K0{K1(X1 + A1) + K2(X2 + A2)} + A0

Multiplication

X0 = K0(K1X1 + A1) (K2X2 + A2) + A0

Division

K0(K1X1 + A1)

X0 = ––––––––––––––– + A0

(K2X2 + A2)

• Signal Selector Functions

High selector

X0 = X1 with X1 ≥ X2

X0 = X2 with X1 < X2

Low selector

X0 = X2 with X1 ≥ X2

X0 = X1 with X1 < X2

Available range

X0 : Output (%) -2 to +102%

X1 through X2 : Input (%) -2 to +102%

K0 through K2 : Gain (no unit) ±29.999

A0 through A2 : Bias (%) ±299.99%

Factory default setting: Addition / Subtraction

K0 = 1, K1 = 1, K2 = 1, A0 = 0%, A1 = 0%, A2 = 0%

Specifications are subject to change without notice.

M6NXF2 SPECIFICATIONS

ES-7918 Rev.6 Page 5/5

http://www.m-system.co.jp/

M6NXF2-S2Z1-R [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E