M6NXR-5V3-R [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NXR-5V3-R
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总4页 (文件大小：147K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NXR

(Usable range: -50 to +250°C, -58 to +482°F; min.span: 20°C, 36°F)

0: Specify (Please provide a resistance table.)

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

RTD TRANSMITTER

(PC programmable)

(Configurator software is used to change the input type and

range.

Functions & Features

Input code 7, 0 cannot be switched to/from other input

types while its temperature range can be changed. It is not

available to switch from input code 1, 3, 4, 5, and 9 to '7' or

'0'. Be aware above.)

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

• Accepts direct input from an RTD and provides an

isolated, linearized DC signal

• Linearization and burnout protection

• PC programmable

[2] OUTPUT

Current

Z1: Range 0 – 20 mA DC

• High-density mounting

Voltage

• Power indicator LED

V2: Range -10 – +10 V DC

V3: Range -5 – +5 V DC

7.5 (.30)

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

102

(4.02)

POWER INPUT

DC Power

102

(4.02)

R: 24 V DC

mm (inch)

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Standards & Approvals

MODEL: M6NXR–[1][2]–R[3]

blank: CE marking

/UL: UL approval, CE marking

Other Options

ORDERING INFORMATION

• Code number: M6NXR-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6NXR-4Z1-R/UL/Q)

blank: none

/Q: Option other than the above (specify the specification)

• Temperature range (e.g. 0 – 100°C)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01/SET)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

EX-FACTORY SETTING

[1] INPUT RTD

1: JPt 100 (JIS'89)

/SET: Preset according to the Ordering Information Sheet

(No. ESU-7833)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 20°C, 36°F)

3: Pt 100 (JIS'89)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 20°C, 36°F)

4: Pt 100 (JIS'97, IEC)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +649°C, -328 to +1200°F; min.span: 20°C, 36°F)

7: Pt 1000

(Usable range: -200 to +850°C, -328 to +1562°F; min.span: 20°C, 36°F)

9: Cu 10 @25°C

M6NXR SPECIFICATIONS

ES-7910 Rev.12 Page 1/4

http://www.m-system.co.jp/

MODEL: M6NXR

GENERAL SPECIFICATIONS

Connection

OUTPUT SPECIFICATIONS

■ DC Current

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS)

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Applicable wire size: 0.2 – 2.5 mm

Screw terminal: Nickel-plated steel

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: -2 – +102 %

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Linearization: Standard

Output range: -5 – +5 V DC

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type, user’s

linearization table, sensor wires, temperature unit, response

characteristics (version 1.30 or later), filter time constant,

etc.

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

For detailed information on the For detailed information,

refer to the users manual for the PC configurator.

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

V3: 1 – 5 V DC

INSTALLATION

Power consumption: Approx. 0.5 W

■Recommended solderless terminal (unit: mm (inch))

5.5 max.

(.22)

4 min.

(.16)

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 65 g (2.3 oz)

3.2 (.13) dia.

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

INPUT SPECIFICATIONS

Input: 2-, 3- or 4-wire RTD

See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (whichever is greater)

Maximum leadwire resistance: 10 Ω per wire

Sensing current; ≤ 1.5 mA

±0.1 % of input range or ±0.15°C (Pt and JPt)

±0.1 % of input range or ±1°C (Cu 10)

(≤ 0.15 mA for input code 7: Pt 1000 or code 0

Specified maximum resistance in the table > 500 Ω)

Resistance range:

• Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 1 sec. (0 – 90 %)

0 - 500 Ω (Input code: 1, 3, 4, 5, 9)

0 - 5 kΩ (Input code: 7)

Burnout response: ≤ 10 sec.

If not specified, the input range is 0 – 100°C.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

M6NXR SPECIFICATIONS

ES-7910 Rev.12 Page 2/4

http://www.m-system.co.jp/

MODEL: M6NXR

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Pt 100, 0 – 100°C, Output Type -5 – +5V, Output

Range 1 – 5V

Input Accuracy** (0.15°C***) ÷ Span (100°C) × 100 %

+ Max. Output Range (10V) ÷ Span (4V) × 0.04 %

= ±0.25 %

**Calculate the accuracy in °C.

***100°C × 0.1 % = 0.1°C ≤ 0.15°C. 0.15°C is used as input

accuracy value.

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

Output Range Selectors

The DIP switch setting is required to select output types

before setting a precise output range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

M6NXR SPECIFICATIONS

ES-7910 Rev.12 Page 3/4

http://www.m-system.co.jp/

MODEL: M6NXR

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS LED

2-wire

RTD

3-wire

RTD

4-wire

RTD

DIP SW

Isolation

Digital

Computation

Output

Driver

–

OUTPUT

Low Drift

Amplifier

POWER LED

–

POWER

JACK

CONFIGURATOR

Specifications are subject to change without notice.

M6NXR SPECIFICATIONS

ES-7910 Rev.12 Page 4/4

http://www.m-system.co.jp/

相关型号：