M6NXU-R90-M2/Q [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NXU-R90-M2/Q
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总6页 (文件大小：156K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NXU

T2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

T3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

T4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

T5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

T6: B (RH) (Usable range 100 to 1820°C, 212 to 3308°F)

T7: R (Usable range -50 to +1760°C, -58 to +3200°F)

T8: S (Usable range -50 to +1760°C, -58 to +3200°F)

TN: N (Usable range -270 to +1300°C, -454 to +2372°F)

T0: Specify (Please provide an emf table.)

RTD

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

UNIVERSAL TRANSMITTER

(PC programmable)

Functions & Features

• Universal input (mV, V, mA, T/C, RTD and potentiometer)

7.5-mm ultra-slim transmitter

• Low profile allows the M6N module mounted in a 120-mm

deep panel.

• PC programmable

(2- , 3- or 4-wire)

• High-density mounting

R1: JPt 100 (JIS'89)

• Power indicator LED

(Usable range: -200 to +500°C, -328 to +932°F)

R3: Pt 100 (JIS'89)

7.5 (.30)

(Usable range: -200 to +650°C, -328 to +1202°F)

R4: Pt 100 (JIS'97, IEC)

(Usable range: -200 to +850°C, -328 to +1562°F)

R5: Pt 50 Ω (JIS'81)

102

(4.02)

(Usable range: -200 to +649 °C, -328 to +1200°F)

R7: Pt 1000

(Usable range: -200 to +850°C, -328 to +1562°F)

R9: Cu 10 @25°C

102

(4.02)

(Usable range: -50 to +250°C, -58 to +482°F)

R0: Specify (Please provide a resistance table.)

Potentiometer

mm (inch)

M1: Total resistance 100 – 5000 Ω

(Configurator software is used to change input over the

described range of the selected suffix code.

For changing between suffix codes, set the Input Range

Selector on the side of unit before software adjustment.)

MODEL: M6NXU–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: M6NXU-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M6NXU-Z1Z1-M2/Q)

[2] OUTPUT

0: User-calibrated (Factory default: 4 – 20 mA DC)

Non-specified orders will be shipped as default factory

settings (M6NXU-00: 4 – 20 mA input/4 – 20 mA output).

• Input range (e.g. 4 – 20 mA DC)

If the unit is to be factory-calibrated to a specific

output type, please select from the following:

Current

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

[1] INPUT

V3: Range -5 – +5 V DC

0: User-calibrated (Factory default: 4 – 20 mA DC)

(Configurator software is used to change output over the

described range of the selected suffix code.

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

If the unit is to be factory-calibrated to a specific

input type, please select from the following:

Current

Z1: Range 0 – 50 mA DC (Input resistance 17 Ω)

Voltage

[3] POWER INPUT

AC Power

S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)

S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)

Thermocouple

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

DC Power

T1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 1/6

http://www.m-system.co.jp/

MODEL: M6NXU

R: 24 V DC

For detailed information, refer to the users manual for the

PC configurator.

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

[4] OPTIONS

blank: none

■Recommended solderless terminal (unit: mm (inch))

5.5 max.

(.22)

4 min.

(.16)

/Q: With options (specify the specification)

3.2 (.13) dia.

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

INPUT SPECIFICATIONS

■ DC Current: Input resistor incoporated

(If not specified, the input range is 4 – 20 mA DC.)

Input range: 0 – 50 mA DC

Minimum span: 2 mA

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

■ DC Voltage

•Code S1 (narrow spans)

Input range: -1000 – +1000 mV DC

Minimum span: 100 mV

GENERAL SPECIFICATIONS

Connection

•Code S2 (wide spans)

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS) (not

available for AC power input)

Input range: -10 – +10 V DC

Minimum span: 1 V

Offset: Lower range can be any specific value within the

input range provided that the minimum span is maintained.

If not specified, the input range is shown below.

S1: 0 – 100 mV DC

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

Applicable wire size: 0.2 – 2.5 mm

S2: 1 – 5 V DC

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

■ Thermocouple

Input resistance: ≥ 1 MΩ

Overrange output: -2 – +102 %

Burnout sensing: ≤ 3 μA

(Negative current output is not available.)

Minimum span: 20°C or 36°F

If not specified, the input range is shown below.

T1 PR: 0–1600°C

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout (thermocouple, RTD & potentiometer input):

Upscale standard; downscale or no burnout

optional by programming

T2 K: 0–1000°C

T3 E: 0–500°C

T4 J: 0–500°C

Linearization (thermocouple & RTD input): Standard

Cold Junction Compensation (thermocouple input): CJC

sensor incorporated

T5 T: 0–300°C

T6 B: 500–1600°C

T7 R: 500–1600°C

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type and range,

output type and range, zero and span, burnout type,

linearization table, (max. 101 points, specified within -2 –

+102% for both input and output), user’s TC/RTD table

(max. 300 points, specified within -1000 to +1000 mV for

TC or 0 to 20 kΩ for RTD), etc.

T8 S: 0–1600°C

TN N: 0–1000°C

■ RTD: 2- , 3- or 4-wire RTD

Maximum leadwire resistance: 10 Ω per wire

Sensing current: ≤ 1.0 mA

Minimum span: 20°C or 36°F

Resistance range:

0 - 500 Ω (Input code: 1, 3, 4, 5, 9)

0 - 5 kΩ (Input code: 7)

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 2/6

http://www.m-system.co.jp/

MODEL: M6NXU

If not specified, the input range is 100°C.

■ Potentiometer

PERFORMANCE in percentage of span

Cold junction compensation error (thermocouple input):

±3°C at 25 ±10°C

Sensing current: ≤ 1.0 mA

Minimum span

±5.4°F at 77 ±18°F

0 – 100 Ω : 10 Ω

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: (0 – 90 %)

0 – 300 Ω : 30 Ω

0 – 600 Ω : 60 Ω

DC voltage or current: ≤ 0.5 s

0 – 1200 Ω : 120 Ω

Thermocouple, RTD, potentiometer: ≤ 1 s

Burnout response time (thermocouple, RTD, potentiometer

input): ≤ 10 s

0 – 2500 Ω : 250 Ω

0 – 5000 Ω : 500 Ω

If not specified, the input range is 0 – 1200 Ω.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

OUTPUT SPECIFICATIONS

■ DC Current

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Accuracy

• DC voltage or current

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (% of range)

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

-1000 – +1000 mV : ±0.01 %

-10 – +10 V : ±0.01 %

0 – 50 mA : ±0.02 % (Except the accuracy of input resistor.)

Output accuracy: ±0.04% of max. output range

[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,

Output Type -5 – +5 V, Output Range 1 – 5 V

Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×

0.01 % = 0.05 %

Code V2 (wide spans)

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

Code V3 (narrow spans)

Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)

× 0.04 % = 0.1 %

Output range: -5 – +5 V DC

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

Accuracy= ±0.15 %

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

• Thermocouple

Overall accuracy: Input accuracy + output accuracy

Input accuracy: Accuracy + Cold Junction Compensation

Error 3°C (5.4°F)

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

Output accuracy: Max. Output Range ÷ Span × ±0.04%

T/C

(PR)

ACCURACY (°C)

±1.00

CONFORMANCE RANGE (°C)

0 – 1760

V3: 1 – 5 V DC

K (CA)

E (CRC)

J (IC)

T (CC)

B (RH)

±0.25

-150 – +1370

-170 – +1000

-180 – +1200

-170 – +400

400 – 1760

±0.20

INSTALLATION

Power Consumption

±0.25

•AC: Max. 2 VA

±0.75

•DC: Approx. 0.5 W

±0.50

200 – 1760

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 65 g (2.3 oz)

±0.50

0 – 1760

±0.30

-130 – +1300

T/C

ACCURACY (°F)

±1.80

CONFORMANCE RANGE (°F)

32 – 3200

(PR)

K (CA)

±0.45

-238 – +2498

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 3/6

http://www.m-system.co.jp/

MODEL: M6NXU

E (CRC)

J (IC)

T (CC)

B (RH)

±0.36

±0.45

±1.35

±0.90

±0.54

-274 – +1832

-292 – +2192

-274 – +752

752 – 3200

392 – 3200

32 – 3200

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

-202 – +2372

Installation Category II

Pollution Degree 2

[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC

output

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

Absolute accuracy in °C: 0.25°C (see the above table)

CJC error (3°C) added: 3.25°C

➠ Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %

Output span: 16 mA (20 – 4)

EN 50581

➠ Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %

➠ Overall accuracy including CJC error = 0.325 + 0.05 =

±0.38 % of span

• RTD

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (whichever is greater)

±0.1 % of input range or ±0.15°C (Pt and JPt)

±1°C (Cu 10)

Output accuracy: ±0.04% of max. output range

[Example] Pt 100, 0 – 100°C, Output Type -5 – +5V, Output

Range 1 – 5V

Input Accuracy* (0.15°C**) ÷ Span (100°C) × 100 %

+ Max. Output Range (10V) ÷ Span (4V) × 0.04 %

= ±0.25 %

* Calculate the accuracy in °C.

** 100°C × 0.1 % = 0.1°C ≤ 0.15°C. 0.15°C is used as input

accuracy value.

• Potentiometer

Accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

Input accuracy: (% of range)

0 – 100 Ω : ±0.05 %

0 – 300 Ω : ±0.05 %

0 – 600 Ω : ±0.03 %

0 – 1200 Ω : ±0.03 %

0 – 2500 Ω : ±0.01 %

0 – 5000 Ω : ±0.01 %

Output accuracy: ±0.04% of max. output range

[Example] Total Resistance 0 – 1200 Ω, Input Range 250–

750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V

Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 %

+ Max. Output Range (10 V) ÷ Span (4 V) × 0.04 %

= ±0.18 %

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 4/6

http://www.m-system.co.jp/

MODEL: M6NXU

EXTERNAL VIEW

■ FRONT VIEW (with the cover open)

DIP switches for configuration

■ SIDE VIEW

Power LED

Status Indicator LED

Configurator Jack

The DIP switch setting is required to select input and output

types before setting a precise range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 5/6

http://www.m-system.co.jp/

MODEL: M6NXU

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

T/C

RTD

POT.

DIP SW

CJC

SENSOR

STATUS LED

comp. leadwire

Isolation

Output

Driver

3-wire

4-wire

2-wire

max.

Digital

Computation

–

Current Input (Z1)

–

OUTPUT

POWER

–

Low Drift

Amplifier

17Ω

Voltage Input (S1, S2)

POWER LED

U (+)

V (–)

–

min.

JACK

CONFIGURATOR

POWER

*1. Input shunt resistor incorporated for current input.

*2. CJC sensor incorporated for thermocouple input.

*3. Available only for DC power input type

Specifications are subject to change without notice.

M6NXU SPECIFICATIONS

ES-7925 Rev.5 Page 6/6

http://www.m-system.co.jp/

M6NXU-R90-M2/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E