M6NYV-666A-M2/K [MSYSTEM]

Screw Terminal Ultra-Slim Signal Conditioners M6N Series;


型号：	M6NYV-666A-M2/K
厂家：	M-SYSTEM
描述：	Screw Terminal Ultra-Slim Signal Conditioners M6N Series
文件：	总3页 (文件大小：131K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6NYV

DC Power

Screw Terminal Ultra-Slim Signal Conditioners M6N Series

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

ISOLATOR

Functions & Features

[4] OPTIONS (multiple selections)

Response Time (0 – 90 %)

• 7.5-mm wide ultra-slim design

• Low profile allows the M6N module mounted in a 120-mm

deep panel

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 3.5 msec. voltage output;

Approx. 25 msec. current output)

Standards & Approvals

• Galvanically isolates process instrumentation signals

• High-density mounting

• Power indicator LED

blank: CE marking

/UL: UL approval, CE marking

Other Options

7.5 (.30)

blank: none

/Q: Option other than the above (specify the specification)

102

(4.02)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

102

(4.02)

mm (inch)

GENERAL SPECIFICATIONS

Connection

Input and output: M3 screw terminal (torque 0.5 N·m)

Power input: Via the Installation Base (model: M6NBS) (not

available for AC power input)

MODEL: M6NYV-[1][2]-[3][4]

or M3 screw terminal (torque 0.5 N·m)

Recommended solderless terminal: Max. 5.8 mm (0.23”)

wide; Ones with insulation sleeve do not fit.

ORDERING INFORMATION

• Code number: M6NYV-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. M6NYV-4W4W-R/K/UL/Q)

Applicable wire size: 0.2 – 2.5 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

• Specify the specification for option code /Q

(e.g. /C01)

Zero adjustment: -2 to +2 % (front)

(Output code 4W: Adjustable at 0 V.)

[1] INPUT / [2] OUTPUT

Span adjustment: 98 to 102 % (front)

AA: 4 - 20 mA DC (Input resistance 50 Ω)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

A6: 4 - 20 mA DC (Input resistance 50 Ω)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

6A: 1 – 5 V DC (Input resistance 1 MΩ min.)

/ 4 - 20 mA DC (Load resistance 550 Ω max.)

66: 1 - 5 V DC (Input resistance 1 MΩ min.)

/ 1 - 5 V DC (Load resistance 5000 Ω min.)

4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.)

/ -10 - +10 V DC (Load resistance 20 kΩ min.)

Power LED: Green light turns on when the power is supplied.

■Recommended solderless terminal (unit: mm (inch))

5.5 max.

(.22)

4 min.

(.16)

3.2 (.13) dia.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

[3] POWER INPUT

AC Power

INSTALLATION

Power Consumption

•AC: Max. 2 VA

M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,

47 – 66 Hz)

(UL not available)

M6NYV SPECIFICATIONS

ES-7901 Rev.8 Page 1/3

http://www.m-system.co.jp/

MODEL: M6NYV

•DC: Approx. 0.45 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6NBS) or DIN rail

Weight: 60 g (2.1 oz)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input or output to power: Reinforced insulation (300 V)

Input to output: Basic insulation (300 V)

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

(With the cover open)

Power LED

Zero Adj.

Span Adj.

M6NYV SPECIFICATIONS

ES-7901 Rev.8 Page 2/3

http://www.m-system.co.jp/

MODEL: M6NYV

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 55°

WIRE INSERTION ANGLE

: approx. 35°

8–M3

SCREW TERMINAL

DIN RAIL HOOK

DIN RAIL

35mm wide

[1 (.04)]

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

7.5 (.30)

102 (4.02)

*Screwdriver stem diameter: 6 mm (.24”) or less

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

INPUT

OUTPUT

POWER

POWER LED

U(+)

V(–)

POWER

* Input shunt resistor incorporated for current input.

** Available only for DC power input type

Specifications are subject to change without notice.

M6NYV SPECIFICATIONS

ES-7901 Rev.8 Page 3/3

http://www.m-system.co.jp/

相关型号：