M6SSN-1DD/Q [MSYSTEM]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series;型号: | M6SSN-1DD/Q |
厂家: | M-SYSTEM |
描述: | Tension-Clamp Ultra-Slim Signal Conditioners M6S Series |
文件: | 总3页 (文件大小:143K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6SSN
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
INPUT LOOP POWERED ISOLATOR
Functions & Features
/UL: UL approval, CE marking
Other Options
• Maintenance-free tension clamp connection
• 5.9-mm wide ultra-slim design
blank: none
/Q: Option other than the above (specify the specification)
• Low profile allows the M6S module mounted in a 120-mm
deep panel
• Loop-powered design eliminates output loop power supply
• Two isolators housed in one enclosure
• High-density mounting
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
5.9 (.23)
GENERAL SPECIFICATIONS
Connection: Tension clamp
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output; between channels
Span adjustments: ±0.5 % (front)
94
(3.70)
102
INPUT & OUTPUT
Equivalent input impedance: 250 Ω plus load resistance
(4.02)
mm (inch)
with 20 mA input
Operational range: 0.05 – 40 mA DC (Accuracy is assured
within 0.05 – 22 mA)
MODEL: M6SSN–[1]DD[2]
Minimum operating current: 0.05 mA
Load resistance: 0 – 600 Ω
18.0
ORDERING INFORMATION
• Code number: M6SSN-[1]DD[2]
Specify a code from below for each [1] and [2].
(e.g. M6SSN-2DD/UL/Q)
17.4V (approx.)
Load resistance 600Ω
16.0
14.0
12.0
• Specify the specification for option code /Q
(e.g. /C01)
10.2V (approx.)
10.0
Load resistance 250Ω
8.0
6.0V (approx.)
6.0
[1] NO. OF CHANNELS
1: 1 channel
Load resistance 50Ω
approx. 5.4
approx. 5.2
approx. 5.0
4.0
2: 2 channels
4
12
20
Input Current (mA)
INPUT
Current
INSTALLATION
D: 0 – 20 mA DC (4 – 20 mA DC)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6SBS) or DIN rail
Weight: 60 g (2.1 oz)
OUTPUT
Current
D: 0 – 20 mA DC (4 – 20 mA DC)
M6SSN SPECIFICATIONS
ES-7975 Rev.7 Page 1/3
http://www.m-system.co.jp/
MODEL: M6SSN
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: Approx. 20 msec. (0 – 90 %)
Load effect: (factory-calibrated with 250 Ω load)
0.004%/Ω (0 – 600 Ω)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
1500 V AC @1 minute (input to output)
2000 V AC @1 minute (between channels)
2000 V AC @1 minute (input or output to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D hazardous locations
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
EXTERNAL VIEW
(With the cover open)
Channel 2
Span Adj.
Channel 1
Span Adj.
M6SSN SPECIFICATIONS
ES-7975 Rev.7 Page 2/3
http://www.m-system.co.jp/
MODEL: M6SSN
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
*
INSERTION ANGLE
: approx. 35°
WIRE INSERTION ANGLE
: approx.35°
TEST PROBE
max. 2 (.08) dia.
5
6
7
8
DIN RAIL HOOK
DIN RAIL
35mm wide
1
2
3
4
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
[0.5 (.02)]
5.9 (.23)
102 (4.02)
• When mounting, no extra space is needed between units.
*Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
Inverter
+
+
–
1
5
6
OUTPUT
S
Channel 1 INPUT
–
+
2
3
Isolation
Inverter
+
–
7
8
OUTPUT
S
Channel 2 INPUT
–
4
Specifications are subject to change without notice.
M6SSN SPECIFICATIONS
ES-7975 Rev.7 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明