M6SSN-2DD/UL [MSYSTEM]

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series;


型号：	M6SSN-2DD/UL
厂家：	M-SYSTEM
描述：	Tension-Clamp Ultra-Slim Signal Conditioners M6S Series
文件：	总3页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6SSN

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

INPUT LOOP POWERED ISOLATOR

Functions & Features

/UL: UL approval, CE marking

Other Options

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

blank: none

/Q: Option other than the above (specify the specification)

• Low profile allows the M6S module mounted in a 120-mm

deep panel

• Loop-powered design eliminates output loop power supply

• Two isolators housed in one enclosure

• High-density mounting

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

5.9 (.23)

GENERAL SPECIFICATIONS

Connection: Tension clamp

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output; between channels

Span adjustments: ±0.5 % (front)

(3.70)

102

INPUT & OUTPUT

Equivalent input impedance: 250 Ω plus load resistance

(4.02)

mm (inch)

with 20 mA input

Operational range: 0.05 – 40 mA DC (Accuracy is assured

within 0.05 – 22 mA)

MODEL: M6SSN–[1]DD[2]

Minimum operating current: 0.05 mA

Load resistance: 0 – 600 Ω

18.0

ORDERING INFORMATION

• Code number: M6SSN-[1]DD[2]

Specify a code from below for each [1] and [2].

(e.g. M6SSN-2DD/UL/Q)

17.4V (approx.)

Load resistance 600Ω

16.0

14.0

12.0

• Specify the specification for option code /Q

(e.g. /C01)

10.2V (approx.)

10.0

Load resistance 250Ω

8.0

6.0V (approx.)

6.0

[1] NO. OF CHANNELS

1: 1 channel

Load resistance 50Ω

approx. 5.4

approx. 5.2

approx. 5.0

4.0

2: 2 channels

Input Current (mA)

INPUT

Current

INSTALLATION

D: 0 – 20 mA DC (4 – 20 mA DC)

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Installation Base (model: M6SBS) or DIN rail

Weight: 60 g (2.1 oz)

OUTPUT

Current

D: 0 – 20 mA DC (4 – 20 mA DC)

M6SSN SPECIFICATIONS

ES-7975 Rev.7 Page 1/3

http://www.m-system.co.jp/

MODEL: M6SSN

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 20 msec. (0 – 90 %)

Load effect: (factory-calibrated with 250 Ω load)

0.004%/Ω (0 – 600 Ω)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

1500 V AC @1 minute (input to output)

2000 V AC @1 minute (between channels)

2000 V AC @1 minute (input or output to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D hazardous locations

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

EXTERNAL VIEW

(With the cover open)

Channel 2

Span Adj.

Channel 1

Span Adj.

M6SSN SPECIFICATIONS

ES-7975 Rev.7 Page 2/3

http://www.m-system.co.jp/

MODEL: M6SSN

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 35°

WIRE INSERTION ANGLE

: approx.35°

TEST PROBE

max. 2 (.08) dia.

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

*Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Inverter

–

OUTPUT

Channel 1 INPUT

–

Isolation

Inverter

–

OUTPUT

Channel 2 INPUT

–

Specifications are subject to change without notice.

M6SSN SPECIFICATIONS

ES-7975 Rev.7 Page 3/3

http://www.m-system.co.jp/

相关型号：