M6SXM-1V3Z1-R/UL [MSYSTEM]

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series;


型号：	M6SXM-1V3Z1-R/UL
厂家：	M-SYSTEM
描述：	Tension-Clamp Ultra-Slim Signal Conditioners M6S Series
文件：	总4页 (文件大小：162K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: M6SXM

V3: Range -5 – +5 V DC

Tension-Clamp Ultra-Slim Signal Conditioners M6S Series

(Configurator software is used to change output over the

described range of the selected suffix code.

POTENTIOMETER TRANSMITTER

(PC programmable)

For changing between suffix codes, set the Output Range

Selector on the side of unit before software adjustment.)

Functions & Features

• Maintenance-free tension clamp connection

• 5.9-mm wide ultra-slim design

• Low profile allows the M6S module mounted in

a 120-mm deep panel

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Provides a DC output proportional to a potentiometer or

slidewire position input

• Linearization and burnout protection

• PC programmable

[2] OPTIONS (multiple selections)

Standards & Approvals

• High-density mounting

blank: CE marking

• Power indicator LED

/UL: UL approval, CE marking

Other Options

blank: none

5.9 (.23)

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

(3.70)

/C02: Polyurethane coating

102

(4.02)

RELATED PRODUCTS

• PC configurator software (model: M6CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

mm (inch)

MODEL: M6SXM–1[1]–R[2]

ORDERING INFORMATION

• Code number: M6SXM-1[1]-R[2]

Specify a code from below for each [1] and [2].

(e.g. M6SXM-1Z1-R/UL/Q)

GENERAL SPECIFICATIONS

Connection

Input and output: Tension clamp

Power input: Via the Installation Base (model: M6SBS)

or Tension clamp

• Potentiometer range (total resistance) (e.g. 0 – 1000 Ω)

• Output range (e.g. 4 – 20 mA DC)

• Specify the specification for option code /Q

(e.g. /C01)

Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: -2 – +102 %

INPUT

(Negative current output is not available.)

Zero adjustment: -2 to +2 % (PC programming)

Span adjustment: 98 to 102 % (PC programming)

Burnout: Upscale standard; downscale or no burnout

optional by programming

1: Total resistance 100 – 5000 Ω

(Configurator software is used to change the input range.)

[1] OUTPUT

Current

Power LED: Green light turns on when the power is supplied.

Status indicator LED: Orange LED; Blinking patterns indicate

different operating status of the transmitter.

Programming: Downloaded from PC; input type (range),

Z1: Range 0 – 20 mA DC

Voltage

V2: Range -10 – +10 V DC

M6SXM SPECIFICATIONS

ES-7979 Rev.9 Page 1/4

http://www.m-system.co.jp/

MODEL: M6SXM

output type and range, zero and span, burnout type, user’s

linearization table, etc.

Mounting: Installation Base (model: M6SBS) or DIN rail

Weight: 65 g (2.3 oz)

For detailed information, refer to the users manual for the

PC configurator.

PERFORMANCE in percentage of span

Overall accuracy: Input accuracy + output accuracy

Inversely proportional to the span.

See CALCULATION EXAMPLES OF OVERALL ACURACY.

• Input accuracy: (% of range)

Configurator connection: 2.5 dia. miniature jack;

RS-232-C level

INPUT SPECIFICATIONS

Sensing current: ≤ 0.15 mA

Minimum span of each range

0 – 100 Ω : 10 Ω

0 – 100 Ω : ±0.05 %

0 – 300 Ω : ±0.05 %

0 – 600 Ω : ±0.03 %

0 – 300 Ω : 30 Ω

0 – 1200 Ω : ±0.03 %

0 – 600 Ω : 60 Ω

0 – 2500 Ω : ±0.01 %

0 – 1200 Ω : 120 Ω

0 – 5000 Ω : ±0.01 %

0 – 2500 Ω : 250 Ω

• Output accuracy: ±0.04 % of max. output range

Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span

Response time: ≤ 1 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

0 – 5000 Ω : 500 Ω

If not specified, the input range is 0 – 1200 Ω.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

OUTPUT SPECIFICATIONS

■ DC Current

Output range: 0 – 20 mA DC

Conformance range: 0 – 20.4 mA DC

Minimum span: 1 mA

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

CALCULATION EXAMPLES OF OVERALL ACCURACY

[Example] Total Resistance 0 – 1200 Ω, Input Range 250–

750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V

Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.01 %

+ Max. Output Range (10 V) ÷ Span (4 V) × 0.04 %

= 0.18 %

Load resistance: Output drive 11 V max.

(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])

If not specified, the output range is 4 – 20 mA DC.

■ DC Voltage

Code V2 (wide spans)

STANDARDS & APPROVALS

EU conformity:

Output range: -10 – +10 V DC

Conformance range: -10.4 – +10.4 V DC

Minimum span: 1 V

EMC Directive

EMI EN 61000-6-4

Code V3 (narrow spans)

EMS EN 61000-6-2

Output range: -5 – +5 V DC

RoHS Directive

Conformance range: -5.2 – +5.2 V DC

Minimum span: 0.5 V

EN 50581

Approval:

Offset: Lower range can be any specific value within the

output range provided that the minimum span is

maintained.

UL/C-UL nonincendive Class I, Division 2,

Groups A, B, C, and D hazardous locations

(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)

UL/C-UL general safety requirements

(UL 61010-1, CAN/CSA-C22.2 No.61010-1)

Load resistance: Output drive 1 mA max.

(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])

If not specified, the output range is shown below.

V2: 0 – 10 V DC

V3: 1 – 5 V DC

INSTALLATION

Power consumption: Approx. 0.5 W

Operating temperature: -20 to +55°C (-4 to +131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

M6SXM SPECIFICATIONS

ES-7979 Rev.9 Page 2/4

http://www.m-system.co.jp/

MODEL: M6SXM

EXTERNAL VIEW

FRONT VIEW (with the cover open)

SIDE VIEW

Power LED

Output Range Selectors

Status Indicator LED

Configurator Jack

The DIP switch setting is required to select output types

before setting a precise output range using PC Configurator

Software (model: M6CFG).

Refer to the instruction manual for detailed procedures.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

SCREWDRIVER

INSERTION ANGLE

: approx. 35°

WIRE INSERTION ANGLE

: approx.35°

TEST PROBE

max. 2 (.08) dia.

DIN RAIL HOOK

DIN RAIL

35mm wide

SCREWDRIVER

INSERTION ANGLE

: approx. 40°

[0.5 (.02)]

5.9 (.23)

102 (4.02)

• When mounting, no extra space is needed between units.

*Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm

M6SXM SPECIFICATIONS

ES-7979 Rev.9 Page 3/4

http://www.m-system.co.jp/

MODEL: M6SXM

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS LED

DIP SW

Isolation

POTENTIOMETER

max.

Digital

Computation

Output

Driver

–

OUTPUT

POWER

Low Drift

Amplifier

POWER LED

–

min.

JACK

CONFIGURATOR

POWER

Specifications are subject to change without notice.

M6SXM SPECIFICATIONS

ES-7979 Rev.9 Page 4/4

http://www.m-system.co.jp/

相关型号：