MD7AP [MSYSTEM]
Lightning Surge Protectors for Electronics Equipment M-RESTER;型号: | MD7AP |
厂家: | M-SYSTEM |
描述: | Lightning Surge Protectors for Electronics Equipment M-RESTER |
文件: | 总2页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MD7AP
Lightning Surge Protectors for
Electronics Equipment M-RESTER
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
LIGHTNING SURGE PROTECTOR FOR
AC POWER SUPPLY
(max. 3A; ultra-slim)
GENERAL SPECIFICATIONS
Construction: Slim-sized front terminal structure
Degree of protection: IP20
Functions & Features
• High discharge current capacity 10 kA (8 / 20 μs)
• Ultra-thin 7-mm-wide module can be mounted
in high density
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm2, stripped length 8 mm
Grounding: DIN Rail
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and grounding
• Power line monitor LED
Housing material: Flame-resistant resin (black)
Monitor LED: Green LED turns ON when the voltage is
supplied; OFF when the safety fuse is blown.
Typical Applications
• Protecting small capacity AC control drives
• Protecting small capacity power supply units
INSTALLATION
AC power supply: Max. output current 3 A
Caution: Use an AC power source with the overload current
protection function.
7 [.28]
Operating temperature: -25 to +85°C (-13 to +185°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may
lower the electric conductivity between this module and the
ground. Use a steel or copper rail.
95
[3.74]
Weight: 85 g (3.0 oz)
98
[3.86]
PERFORMANCE
mm [inch]
LINE TO LINE
LINE TO
EARTH
MD7AP-100 MD7AP-200
Max. continuous
operating voltage (Uc)
140V AC
275V AC
275V AC
MODEL: MD7AP-[1][2]
Voltage protection level
(Up) @6kV (1.2 / 50 µs)
±550V
±±50V
±±50V
ORDERING INFORMATION
• Code number: MD7AP-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. MD7AP-100/Q)
Leakage current @Uc
Response time
≤ 1mA
≤ 1mA
≤ 1mA
≤ 20 nsec. ≤ 20 nsec. ≤ 20 nsec.
10kA (± / 20 µs)
Max. discharge current
(Imax)
Nominal current (IN)
Surge protection
3A
• Specify the specification for option code /Q
(e.g. /C01)
IEC 61643-21 Categories C1, C2, D1
EN 61643-21 Categories C1, C2, D1
[1] OPERATIONAL VOLTAGE
100: 100 V / 110 V / 120 V AC
STANDARDS & APPROVALS
EU conformity:
200: 200 V / 220 V / 240 V AC
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61643-21
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
RoHS Directive
MD7AP SPECIFICATIONS
ES-8069 Rev.6 Page 1/2
https://www.m-system.co.jp/
MODEL: MD7AP
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
8–M3 EURO
TERMINAL
WIRE INSERTION ANGLE: approx. 20°
8
6
5
4
8
DIN RAIL
ADAPTOR
6
5
DIN RAIL
4
(35 mm wide)
MONITOR LED
1
2
3
7
1
2
3
7
(1.5 [.06])
98 [3.86]
7
[.28]
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
*4
AC Power
Supply
(protected)
Electronic
Protected
Device
Protected
Side
Surge
Side
Surge
Side
M-RESTER
M-RESTER
Side
(protected)
*5
1
4
4
1
U
U
SAFETY
FUSE
SAFETY
FUSE
MONITOR LED
MONITOR LED
INDICATOR
CIRCUIT
INDICATOR
CIRCUIT
2
3
7
5
6
8
5
6
8
2
3
7
V
V
SAFETY
FUSE
SAFETY
FUSE
SAFETY
FUSE
SAFETY
FUSE
DIN RAIL ADAPTOR
(for grounding)
DIN RAIL ADAPTOR
(for grounding)
FG
FG
*3
*3
Crossover Wire
Crossover Wire
*1
*1
DIN RAIL
DIN RAIL
*2
*2
Grounding
Grounding
*1. Oxide film on the surface of an aluminium rail may lower the electric conductivity between this module and the ground.
Use a steel or copper rail.
*2. Be sure to ground the DIN rail. Recommended grounding resistance ≤100Ω
*3. Cross-wire between the DIN rail and the metal housing of the protected device to equalize the earth potential.
Ground only the surge protector when the protected device has no ground terminal.
*4. Use an AC power source with the overload current protection function. (maximum output current 3A)
*5. Install a current limiting element (capacity 3) when the output current exceeds 3A.
Specifications are subject to change without notice.
MD7AP SPECIFICATIONS
ES-8069 Rev.6 Page 2/2
https://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明