MDP-TL/A33 [MSYSTEM]
Lightning Surge Protectors for Electronics Equipment M-RESTER;型号: | MDP-TL/A33 |
厂家: | M-SYSTEM |
描述: | Lightning Surge Protectors for Electronics Equipment M-RESTER |
文件: | 总3页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MDP-TL
Lightning Surge Protectors for
Electronics Equipment M-RESTER
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: Modular jack or M4 screw terminals (torque 0.8
N·m)
LIGHTNING SURGE PROTECTOR
Modular jack cord: 6-pole, 2-core
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
FOR TELECOMMUNICATION LINE USE
Functions & Features
• Designed specifically to protect telecommunication
equipment from lightning surges entering through
telecommunication line network
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
• Easy connection to the protected equipment
with modular jacks
• Connection with a telephone and a modem in
parallel
Weight:
120 g (0.26 lb), standard
• No interruption of transmission signal by unplugging the
protector element
145 g (0.32 lb), with DIN rail mounting adapter
PERFORMANCE
Max. continuous operating voltage (Uc):
Line to line: ±160 V
Lot.NO
Line to earth: ±160 V
MDEIJPAN1430B
Voltage protection level (Up):
• @ 1 kV (100 A)
M•STER
MODEL
Line to line: ±650 V
Line to earth: ±900 V
• @ 2 kV (1 kA)
MODEL: MDP–TL[1]
Line to line: ±550 V
Line to earth: ±900 V
ORDERING INFORMATION
• Code number: MDP-TL[1]
Specify a code from below for [1].
(e.g. MDP-TL/A33/Q)
Response time: ≤ 0.1 μsec.
Leakage current:
Line to line: ≤ 100 μA @ ±160 V DC
Line to earth: ≤ 100 μA @ ±160 V DC
Max. discharge current (Imax):
Modular jack: 500 A (8 / 20 μs)
Screw terminal: 1000 A (8 / 20 μs)
• Specify the specification for option code /Q
(e.g. /C01)
Nominal current (I ): 500 mA
N
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
Internal series resistance: ≤ 0.1 Ω (including return)
Capacitance @ 1 MHz:
Line to line: ≤ 1000 pF
/A33: With adapter (model A-33)
Other Options
Line to earth: ≤ 100 pF
Surge protection: IEC 61643-21 Categories C1, C2
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MDP-TL SPECIFICATIONS
ES-8202 Rev.8 Page 1/3
http://www.m-system.co.jp/
MODEL: MDP-TL
CONNECTION EXAMPLES
Element Section
L2
L2’
LINE
M. J.
MODEM
M. J.
MODEM
TELECOM.
LINE
Discharge Elements
L1
L1’
L2’
G
PHONE
M. J.
TELEPHONE
SET
L1’
G
L2
L1
L2’
P1
S1
S2
LINE
SCREW
TERMINALS
MODEM/PHONE
SCREW
TERMINALS
L1’
P2
Base Section
G
GROUND
TERMINAL
CROSS WIRE
GROUNDING
(100Ω max.)
Be sure to cross-wire between G terminals of modem / telephone set
and the G terminal of the MDP-TL.
GROUNDING
PROTECTED
EQUIPMENT
M-RESTER
G
G
GROUNDING
(100 ohms or less)
CROSSOVER WIRE
A crossover wire between M-RESTER ground and the ground or
metallic housing of the equipment is required for protection.
If the protected equipment has no ground terminal, ground the
M-RESTER only.
When the M-RESTER is mounted with DIN Rail Mounting Adapter,
connect the grounding wire to the mounting screw of the M-RESTER.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
80 (3.15)
2–5 (.20) dia.
23.5 (.93)
MTG HOLE
53 (2.08)
27 (1.06)
MODEM M. J.
PHONE M. J.
P1
P2
BASE
4–M4 TERMINAL SCREW
HEAD ELEMENT
S1
S2
LINE M. J.
GROUND TERMINAL (G)
(used as mounting bracket)
MDP-TL SPECIFICATIONS
ES-8202 Rev.8 Page 2/3
http://www.m-system.co.jp/
MODEL: MDP-TL
MOUNTING REQUIREMENTS unit: mm (inch)
2–M4 SCREW
25 (.97) min.
Specifications are subject to change without notice.
MDP-TL SPECIFICATIONS
ES-8202 Rev.8 Page 3/3
http://www.m-system.co.jp/
相关型号:
MDP003G
Circular DIN Connector, 3 Contact(s), Male, Cable Mount, Wire Terminal, Locking Mech, Plug
ADAM-TECH
MDP003M
Circular DIN Connector, 3 Contact(s), Male, Cable Mount, Wire Terminal, Locking, Plug
ADAM-TECH
MDP004
Circular DIN Connector, 4 Contact(s), Male, Cable Mount, Wire Terminal, Locking, Plug
ADAM-TECH
MDP004G
Circular DIN Connector, 4 Contact(s), Male, Cable Mount, Wire Terminal, Locking Mech, Plug
ADAM-TECH
MDP004M
Circular DIN Connector, 4 Contact(s), Male, Cable Mount, Wire Terminal, Locking, Plug
ADAM-TECH
©2020 ICPDF网 联系我们和版权申明