MDP-TL/Q [MSYSTEM]

Lightning Surge Protectors for Electronics Equipment M-RESTER;


型号：	MDP-TL/Q
厂家：	M-SYSTEM
描述：	Lightning Surge Protectors for Electronics Equipment M-RESTER
文件：	总3页 (文件大小：103K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: MDP-TL

Lightning Surge Protectors for

Electronics Equipment M-RESTER

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: Modular jack or M4 screw terminals (torque 0.8

N·m)

LIGHTNING SURGE PROTECTOR

Modular jack cord: 6-pole, 2-core

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

FOR TELECOMMUNICATION LINE USE

Functions & Features

• Designed specifically to protect telecommunication

equipment from lightning surges entering through

telecommunication line network

INSTALLATION

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

• Easy connection to the protected equipment

with modular jacks

• Connection with a telephone and a modem in

parallel

Weight:

120 g (0.26 lb), standard

• No interruption of transmission signal by unplugging the

protector element

145 g (0.32 lb), with DIN rail mounting adapter

PERFORMANCE

Max. continuous operating voltage (Uc):

Line to line: ±160 V

Lot.NO

Line to earth: ±160 V

MDEIJPAN1430B

Voltage protection level (Up):

• @ 1 kV (100 A)

M•STER

MODEL

Line to line: ±650 V

Line to earth: ±900 V

• @ 2 kV (1 kA)

MODEL: MDP–TL[1]

Line to line: ±550 V

Line to earth: ±900 V

ORDERING INFORMATION

• Code number: MDP-TL[1]

Specify a code from below for [1].

(e.g. MDP-TL/A33/Q)

Response time: ≤ 0.1 μsec.

Leakage current:

Line to line: ≤ 100 μA @ ±160 V DC

Line to earth: ≤ 100 μA @ ±160 V DC

Max. discharge current (Imax):

Modular jack: 500 A (8 / 20 μs)

Screw terminal: 1000 A (8 / 20 μs)

• Specify the specification for option code /Q

(e.g. /C01)

Nominal current (I ): 500 mA

[1] OPTIONS (multiple selections)

DIN Rail Mounting Adapter

blank: Without

Internal series resistance: ≤ 0.1 Ω (including return)

Capacitance @ 1 MHz:

Line to line: ≤ 1000 pF

/A33: With adapter (model A-33)

Other Options

Line to earth: ≤ 100 pF

Surge protection: IEC 61643-21 Categories C1, C2

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

MDP-TL SPECIFICATIONS

ES-8202 Rev.8 Page 1/3

http://www.m-system.co.jp/

MODEL: MDP-TL

CONNECTION EXAMPLES

Element Section

L2’

LINE

M. J.

MODEM

M. J.

MODEM

TELECOM.

LINE

Discharge Elements

L1’

L2’

PHONE

M. J.

TELEPHONE

SET

L1’

L2’

LINE

SCREW

TERMINALS

MODEM/PHONE

SCREW

TERMINALS

L1’

Base Section

GROUND

TERMINAL

CROSS WIRE

GROUNDING

(100Ω max.)

Be sure to cross-wire between G terminals of modem / telephone set

and the G terminal of the MDP-TL.

GROUNDING

PROTECTED

EQUIPMENT

M-RESTER

GROUNDING

(100 ohms or less)

CROSSOVER WIRE

A crossover wire between M-RESTER ground and the ground or

metallic housing of the equipment is required for protection.

If the protected equipment has no ground terminal, ground the

M-RESTER only.

When the M-RESTER is mounted with DIN Rail Mounting Adapter,

connect the grounding wire to the mounting screw of the M-RESTER.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

80 (3.15)

2–5 (.20) dia.

23.5 (.93)

MTG HOLE

53 (2.08)

27 (1.06)

MODEM M. J.

PHONE M. J.

BASE

4–M4 TERMINAL SCREW

HEAD ELEMENT

LINE M. J.

GROUND TERMINAL (G)

(used as mounting bracket)

MDP-TL SPECIFICATIONS

ES-8202 Rev.8 Page 2/3

http://www.m-system.co.jp/

MODEL: MDP-TL

MOUNTING REQUIREMENTS unit: mm (inch)

2–M4 SCREW

25 (.97) min.

Specifications are subject to change without notice.

MDP-TL SPECIFICATIONS

ES-8202 Rev.8 Page 3/3

http://www.m-system.co.jp/

相关型号：