MEPF-11PF-P [MSYSTEM]

Plug-in Signal Conditioners M-UNIT;


型号：	MEPF-11PF-P
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners M-UNIT
文件：	总4页 (文件大小：120K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: MEPF

Plug-in Signal Conditioners M-UNIT

[3] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

GW: -1 – +1 mA DC (Load resistance 10 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

POWER FACTOR TRANSDUCER

Functions & Features

• Providing a DC output signal in proportion to power factor

• DC output containing little ripple is ideal for computer

input

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

• Centralized monitoring and control of power management

system in a manufacturing facility or building

• Measuring power factor for a motor

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

1W: -10 – +10 mV DC (Load resistance 10 kΩ min.)

2W: -100 – +100 mV DC (Load resistance 100 kΩ min.)

3W: -1 – +1 V DC (Load resistance 1000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

(1.97)

(3.15)

136

(5.35)

mm (inch)

[4] POWER INPUT

AC Power

MODEL: MEPF–1[1][2][3]–[4][5]

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

ORDERING INFORMATION

• Code number: MEPF-1[1][2][3]-[4][5]

Specify a code from below for each of [1] through [5].

(e.g. MEPF-11PA-C/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

DC Power

S: 12 V DC

R: 24 V DC

CONFIGURATION

1: 3-phase / 3-wire

V: 48 V DC

P: 110 V DC

[1] INPUT (balanced load)

1: 110 V / 5 A AC

[5] OPTIONS

blank: none

2: 110 V / 1 A AC

/Q: With options (specify the specification)

3: 220 V / 1 A AC

4: 220 V / 5 A AC

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

[2] OUTPUT SIGNAL POLARITY

P: Negative in lag, positive in lead

/C02: Polyurethane coating

M: Negative in lead, positive in lag

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

MEPF SPECIFICATIONS

ES-1923 Rev.7 Page 1/4

http://www.m-system.co.jp/

MODEL: MEPF

■ OPERATION DIAGRAM (example)

GENERAL SPECIFICATIONS

Construction: Plug-in

• Negative in lag, positive in lead

OUT

20mA

OUT

+10V

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Voltage input to current input to output to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

-10V

0.5

(Lag)

0.5

(Lag)

0.5

(Lead)

0.5

(Lead)

• Negative in lead, positive in lag

OUT

20mA

OUT

+10V

INPUT SPECIFICATIONS

Note: A device which employs different measuring methods

may show different outputs from that of M-System's.

Frequency: 50 or 60 Hz

-10V

0.5

(Lag)

0.5

(Lead)

0.5

(Lag)

0.5

(Lead)

• Current Input

Input burden: 0.1 VA (input 1 A)

0.5 VA (input 5 A)

Note: When there is no input voltage or 5% or less of rated

input current , the output may become unstable (hunting).

Operational range: 10 – 120 % of rating

Overload capacity: 1000 % of rating for 3 sec., 200 %

for 10 sec., 120 % continuous

• Voltage Input

INSTALLATION

Power input

Input burden: Approx. 0.5 VA

Operational range: 85 – 120 % of rating

Overload capacity: 150 % of rating for 10 sec., 120 %

continuous

•AC: Operational voltage range: rating -15/+10 %,

50/60 Hz, approx. 2 VA

• DC: Operational voltage range: rating ±10 %,

or 85 – 150 V for 110 V rating, ripple 10 %p-p max.,

approx. 2 W (18 mA at 110 V)

■ Input range:

Lag 0.5 – 1 – lead 0.5

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Lead 0.5 – 1 – lag 0.5

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC and ± 1 mA

Minimum span: 1 mA

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy:

Offset: Max. 1.5 times span

Load resistance: Output drive 12 V maximum; 10 V for [±]

output

±2 % with input 1 – 0.866, balanced load

±4 % with input 0.866 – 0.5, balanced load

Temp. coefficient: ±0.4 %/°C (±0.22 %/°F)

Response time: ≤ 1 sec. (0 – 90 %)

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Ripple: 0.5 %p-p max. (50/60 Hz)

Load resistance: Output drive 1 mA max. at ≥ 0.5 V

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(voltage input to current input to output to power to ground)

MEPF SPECIFICATIONS

ES-1923 Rev.7 Page 2/4

http://www.m-system.co.jp/

MODEL: MEPF

CONNECTION DIAGRAM

■3-PHASE/3-WIRE

SOURCE

FUSE

–

OUTPUT

U(+)

V(–)

POWER**

LOAD

*CT Protector (model: CTM) attached to these terminals.

**The transducer can be powered from the input voltage

when the voltage is sufficiently stable and meets

other supply voltage requirements.

EXTERNAL DIMENSIONS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–

4.5 (.18) dia.

MTG HOLE

25 (.98) deep

10 11

–M3.5

SCREW

50 (1.97)

107 (4.21)

136 (5.35)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

CT PROTECTOR

(model: CTM)

10 11

MEPF SPECIFICATIONS

ES-1923 Rev.7 Page 3/4

http://www.m-system.co.jp/

MODEL: MEPF

Specifications are subject to change without notice.

MEPF SPECIFICATIONS

ES-1923 Rev.7 Page 4/4

http://www.m-system.co.jp/

相关型号：