MNV-2-C [MSYSTEM]

Plug-in Signal Conditioners M-UNIT;


型号：	MNV-2-C
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners M-UNIT
文件：	总3页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: MNV

R: 24 V DC

V: 48 V DC

Plug-in Signal Conditioners M-UNIT

ANALOG SWITCHING MODULE

Functions & Features

[3] OPTIONS

blank: none

• Selecting one signal as output from up to four analog

input signals

/Q: With options (specify the specification)

• Distributing a single input signal to any or all of the up to

four output channels

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• High-density mounting

Typical Applications

/C02: Polyurethane coating

• Switching 1 – 5 V DC signal: no contact failure that

happens when using mechanical contacts for this purpose

• Switching low-speed pulse signals

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

• Switching alternating signals

GENERAL SPECIFICATIONS

Construction: Plug-in

(2.83)

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

(3.15)

Housing material: Flame-resistant resin (black)

Switching: Photo MOSFET relay

136

(5.35)

Isolation: Switching command relay to signal line to power

Monitor LED 1: Red light turns on with SW1 ON

Monitor LED 2: Red light turns on with SW2 ON

Monitor LED 3: Red light turns on with SW3 ON

Monitor LED 4: Red light turns on with SW4 ON

mm (inch)

MODEL: MNV–[1]–[2][3]

ORDERING INFORMATION

• Code number: MNV-[1]-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. MNV-1-B/Q)

INPUT & OUTPUT

■ Signal Line

Max. operational voltage range: ±50 V DC (min. span 10

mV)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Max. operational current range: ±50 mA DC

Max. operational frequency range: 100 Hz

ON resistance: Approx. 50 Ω per line

■ Switching Command: Relay contact or open

collector

[1] SWITCHING CIRCUIT

1: Single circuit

Sensing:

2: Double circuit

Approx. 20 V DC @ 7 mA with single circuit

Approx. 20 V DC @ 14 mA with double circuit

Detection levels

[2] POWER INPUT

AC Power

ON resistance: ≤ 1 KΩ, ≤ 5 V

OFF resistance: ≥ 100 kΩ, ≥ 18 V

Leakage current at OFF: 1 μA (400 V AC between lines)

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

INSTALLATION

Power input

G: 200 V AC

H: 220 V AC

J: 240 V AC

• AC: Operational voltage range: rating ±10 %,

50/60 ±2 Hz, approx. 2 VA

DC Power

•DC: Operational voltage range: rating ±10 %

S: 12 V DC

MNV SPECIFICATIONS

ES-1691 Rev.9 Page 1/3

http://www.m-system.co.jp/

MODEL: MNV

(ripple 10 % p-p max.) approx. 1 W (30 mA at 24 V)

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 350 g (0.77 lb)

PERFORMANCE

Response time: Approx. 1 msec.

Leakage current at open circuit: ≤ 1 μA

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(switching command relay to singal line to power to ground)

EXTERNAL VIEW

Monitor LED 4

Monitor LED 3

Monitor LED 2

Monitor LED 1

Front Cover (open)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–4.5 (.18) dia.

MTG HOLE

25 (.98) deep

15 10

14–M3.5

SCREW

50 (1.97)

72 (2.83)

107 (4.21)

136 (5.35)

60 (2.36)

72 (2.83)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

MNV SPECIFICATIONS

ES-1691 Rev.9 Page 2/3

http://www.m-system.co.jp/

MODEL: MNV

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

■SINGLE CIRCUIT

The MNV can select and output one signal (B) from

among the 4 channels (A1 – A4) or distribute a single

analog signal (B) to any or all of the channels (A1 – A4).

SW1

SW2

SW3

SW4

Mon. LED 1

Mon. LED 2

Mon. LED 3

Mon. LED 4

U(+)

V(–)

SWITCHING

COMMAND

POWER

–

Base Socket

■DOUBLE CIRCUIT

The MNV can select either (B) of the 2 channels (A1, A2)

as output or distribute a single analog signal (B) to either

or both channels (A1, A2).

SW1

SW2

SW3

SW4

A1–1

B–1

B–2

A1–2

A2–1

A2–2

Mon. LED 1

Mon. LED 2

Mon. LED 3

Mon. LED 4

U(+)

V(–)

SWITCHING

COMMAND

POWER

–

Base Socket

Specifications are subject to change without notice.

MNV SPECIFICATIONS

ES-1691 Rev.9 Page 3/3

http://www.m-system.co.jp/

相关型号：