MP1122-F-SV [MSYSTEM]
DC INPUT LIMIT ALARM;
| 型号： | MP1122-F-SV |
| 厂家： | 
M-SYSTEM |
| 描述： | DC INPUT LIMIT ALARM 输入元件 |
| 文件： | 总4页 (文件大小：87K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Limit Alarms M-PAC
MODEL
DC INPUT LIMIT ALARM
MP1000-1023
MODEL & SUFFIX CODE SELECTION
50
(1.97)
MP10❑❑–❑–❑/❑
MODEL
80
(3.15)
INPUT TYPE
SET
1
SPAN
ZERO
0 : DC current or voltage
RELAY CONTACT OUTPUT
M•PAC
LIMIT ALARM
SET
1
DEADBAND
SET
2
DEADBAND
0 : Single (Hi) trip, non-latching
1 : Single (Hi) trip, latching
132
(5.20)
SET
2
2 : Dual (Hi/Lo) trip, non-latching
SETPOINT CONTROL
mm (inch)
Functions & Features
0 : Front-accessed three-turn screwdriver adjust.
2 : Remote dial connections (total resistance 1k – 100kΩ)
3 : DC programmable (0 – 1V)
INPUT RANGE
• Accepting a large variety of DC inputs and pro-
viding relay contact closure(s) at a preset input level
• Single, latching or dual setpoint • Failsafe opera-
tion available • Deadband adjustable from 1 to 100%
• Indicator LED provided
Current
Voltage
A : 4 – 20mA DC
B : 2 – 10mA DC
C : 1 – 5mA DC
D : 0 – 20mA DC
E : 0 – 16mA DC
F : 0 – 10mA DC
G : 0 – 1mA DC
H : 10 – 50mA DC
Z : Specify current
1 : 0 – 10mV DC
2 : 0 – 100mV DC
3 : 0 – 1V DC
4 : 0 – 10V DC
5 : 0 – 5V DC
6 : 1 – 5V DC
U1 : Specify voltage
(10≤span<100mV)
U2 : Specify voltage
(0.1≤span<1V)
U3 : Specify voltage
(1V≤span)
Typical Applications
• Annunciator • Various alarm applications
GENERAL SPECIFICATIONS
Construction: plug-in
Connection: M3.5 screw terminals on base socket
Housing material: flame-resistant resin (black)
Isolation: input to output to power
(non-isolated between I/O with Option V)
Zero/span adjustments: ±5% (front)
Setpoint adjustments: front accessed three-turn
screwdriver, remote dial potentiometer
or DC input
Deadband adjustments: front accessed single-turn
screwdriver; 1 – 100%
Front LEDs: red lights turn on at a tripped condition
Power ON timer: relays de-energized for approx. 2
seconds after power is turned on.
POWER INPUT
F : 120V AC
J : 240V AC
R : 24V DC
S : 12V DC
OPTIONS
H : Latching operation for dual trip (102X only);
Reset at power off (5 seconds min.)
R : Reversed relay sense
T : Transmitter output (0 – 1V DC)
V : Relay drive voltage output
X : Lo-trip sense for single trip; Lo/Lo for dual trip
Y : Hi/Hi-trip sense for dual trip (102X only)
ORDERING INFORMATION
Specify code number and variables.
•Code number (e.g. MP1000-6-F/T/V)
•Special input range (For codes Z, U1, U2 & U3)
P. 1 / 4
ES-9801 Rev.6
MP1000-1023
INPUT & OUTPUT
INSTALLATION
■INPUT
Power input
•DC Current: input resistor incorporated
Input resistance: For resistance values other than
listed below, specify when ordering.
AC:
DC:
rating ±10%, 50/60 ±2 Hz, approx. 2VA
rating ±10% (ripple 10% p-p max.)
80mA at 24V, 160mA at 12V
Input
Input Resistance
: 250 (Ω)
: 500
: 1000
: 50
: 62.5
: 100
: 1000
: 100
Operating temperature: -5 to +60°C (23 to 140°F)
Storage temperature: -20 to +85°C (-5 to +185°F)
Operating humidity: 30 to 90% RH (non-condensing)
Mounting: surface (DIN rail available for 11-pin base)
Dimensions
4 – 20mA
2 – 10mA
1 – 5mA
0 – 20mA
0 – 16mA
0 – 10mA
0 – 1mA
10 – 50mA
11-pin base: W50×H80×D132 mm
(1.97"×3.15"×5.20")
See General Spec. Sheet Figure A.
20-pin base: W80×H101×D136 mm
(3.15"×3.98"×5.35")
•DC Voltage: -300 – +300V DC
Minimum span: 10mV
See General Spec. Sheet Figure B.
400 g (0.88 lbs)
Weight:
Zero suppression/elevation: max. 1.5 times span
Input resistance
PERFORMANCE in percentage of span
Repeatability: ±0.2%
Temp. coefficient: ±0.05%/°C (±0.027%/°F)
Response time: 100 milliseconds, typical
Common mode rejection
Input Span
10 – 100mV
0.1 – 1V
≥1V
Input Resistance
: 10k (Ω minimum)
: 100k
: 1M
60 Hz: greater than 120 dB
■REMOTE SETPOINT INPUT
MP10X2: potentiometer; any value of 1k – 100kΩ;
excitation 4V
DC:
greater than 140 dB
Line voltage effect: ±0.1% over voltage range
Insulation resistance: ≥100MΩ with 500V DC
Dielectric strength: 1000V AC @1 minute
(input to output to power)
MP10X3: 0 – 1V DC
■RELAY CONTACT OUTPUT
•Single/Latching: isolated DPDT relay; de-energized
at trip
2000V AC @1 minute (output to ground)
•Dual:
isolated SPDT relay; energized at trip
Rating:
120V AC @3A (cosø=1)
30V DC @3A (resistive load)
Relay life
Electrical: 105 cycles
Mechanical: 107 cycles
For maximum relay life with inductive
loads, external protection is recommended.
■VOLTAGE OUTPUT (Option V): 24V DC average;
Drives 1.2kΩ or greater coil impedance
■TRANSMITTER OUTPUT (Option T): 0 – 1V DC;
1mA max. (setpoint and process input)
Specifications subject to change without notice.
P. 2 / 4
ES-9801 Rev.6
BLOCK DIAGRAM
■SINGLE / LATCHING OUTPUT
•11-pin Base
•20-pin Base
Option V
Option V
Z
S
SP.SET DB
Z
S
SP.SET DB
6
7
6
7
13
14
15
17
18
19
13
14
15
17
18
19
N.O.
COM.
N.C.
N.O.
COM.
N.C.
COM-
PAR
COM-
PAR
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
+
–
+
+
–
+
+
–
4
5
1
2
3
AMP
9
11
1
AMP
INPUT
INPUT
HOT /
INPUT
–
+
8
8
INPUT
HOT /
9
9
N.O.
COM.
N.C.
N.O.
COM.
N.C.
POWER
10
11
10
11
2
POWER
–
–
3
NEU /
NEU /
16
20
4
LATCH RESET
LATCH RESET
MP101X
+
4
4
5
6
7
8
MP10X2
MP10X3
SP
MP10X0
SP XMTR
–
5
5
6
7
10
12
SP POT CCW
SP POT W
XMTR COMMON
+
+
6
SP
PROC XMTR
7
SP POT CW
Option T
■DUAL OUTPUT
•11-pin Base
•20-pin Base
Option V
Option V
Z
S
SP.SET DB
Z
S
SP.SET DB
HI
LO
6
7
6
7
13
14
15
17
18
19
13
14
15
17
18
19
N.O.
COM.
N.C.
N.O.
COM-
PAR
COM-
PAR
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
+
–
+
+
–
+
–
+
4
5
1
2
3
AMP
9
11
1
AMP
INPUT
INPUT
HOT /
INPUT
COM.
N.C.
–
+
8
8
INPUT
HOT /
SP.SET DB
SP.SET DB
9
9
N.O.
COM.
N.C.
N.O.
COM.
N.C.
COM-
PAR
COM-
PAR
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
RELAY
DRIVE
+
–
–
+
POWER
10
11
10
11
2
POWER
–
–
3
NEU /
NEU /
LO
HI
MP1022
4
5
6
7
8
4
4
5
6
7
8
LO SP POT CW
LO SP POT W
SP POT CCW
HI SP POT W
HI SP POT CW
MP1023
LO SP
MP1020
Option T
+
+
5
6
7
8
10
12
16
20
PROC XMTR
LO SP XMTR
HI SP XMTR
SP
COMMON
+
+
+
HI SP
XMTR COMMON
P. 3 / 4
ES-9801 Rev.6
MP1000-1023
TERMINAL ASSIGNMENT
■SINGLE OUTPUT
KEYS
PIN
MP1000
MP1000
MP1002
MP1002
MP1003
MP1003
N.O. = Normally Open
COM = Common
N.C. = Normally Closed
Proc = Process
Xmtr = Transmitter
SP = Setpoint
W = Wiper
CW = Clockwise
CCW = Counterclockwise
w/Option T
w/Option T
w/Option T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
POWER (Hot/+)
No Connection
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)
No Connection No Connection No Connection No Connection
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)
POWER (Hot/+)
No Connection
INPUT +
INPUT –
N.O.
COM *
N.C. *
N.O.
No Connection
No Connection
No Connection
No Connection
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
No Connection
N.O.
COM
No Connection
SP Pot CCW
SP Pot W
SP Pot CW
No Connection
INPUT +
No Connection
INPUT –
No Connection
N.O.
COM *
N.C. *
No Connection
N.O.
No Connection
SP Pot CCW
SP Pot W
SP Pot CW
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
No Connection
N.O.
COM
No Connection
SP –
SP +
No Connection
No Connection
INPUT +
No Connection
INPUT –
No Connection
N.O.
COM *
N.C. *
No Connection
N.O.
COM
No Connection
SP –
SP +
No Connection
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
No Connection
N.O.
COM
*Pins used for Option V
20-pin = 14(+) - 15(–)
11-pin = 7(+) - 8(–)
COM
N.C.
COM
N.C.
No Connection
N.C.
No Connection
N.C.
No Connection
N.C.
No Connection
N.C.
No Connection
■LATCHING OUTPUT
KEYS
PIN
MP1010
MP1010
MP1012
MP1012
MP1013
MP1013
N.O. = Normally Open
COM = Common
N.C. = Normally Closed
Proc = Process
Xmtr = Transmitter
SP = Setpoint
W = Wiper
CW = Clockwise
CCW = Counterclockwise
w/Option T
w/Option T
w/Option T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
POWER (Hot/+)
No Connection
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)
No Connection No Connection No Connection No Connection
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)
POWER (Hot/+)
No Connection
No Connection
No Connection
No Connection
No Connection
No Connection
INPUT +
No Connection
INPUT –
No Connection
N.O.
COM *
N.C. *
Latch Reset
N.O.
COM
No Connection
No Connection
No Connection
No Connection
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
Latch Reset
N.O.
No Connection
SP Pot CCW
SP Pot W
SP Pot CW
No Connection
INPUT +
No Connection
INPUT –
No Connection
N.O.
COM *
N.C. *
Latch Reset
N.O.
COM
No Connection
SP Pot CCW
SP Pot W
SP Pot CW
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
Latch Reset
N.O.
COM
No Connection
SP –
SP +
No Connection
No Connection
INPUT +
No Connection
INPUT –
No Connection
N.O.
COM *
N.C. *
Latch Reset
N.O.
COM
No Connection
SP –
SP +
No Connection
SP Xmtr +
INPUT +
Xmtr Common
INPUT –
Proc Xmtr +
N.O.
COM *
N.C. *
Latch Reset
N.O.
COM
*Pins used for Option V
20-pin = 14(+) - 15(–)
COM
N.C.
Latch Reset
N.C.
Latch Reset
N.C.
Latch Reset
N.C.
Latch Reset
N.C.
Latch Reset
N.C.
Latch Reset
■DUAL OUTPUT
KEYS
PIN
MP1020
MP1020
MP1022
MP1022
MP1023
MP1023
N.O. = Normally Open
COM = Common
N.C. = Normally Closed
Proc = Process
Xmtr = Transmitter
SP = Setpoint
W = Wiper
CW = Clockwise
CCW = Counterclockwise
w/Option T
w/Option T
w/Option T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
POWER (Hot/+)
No Connection
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)
No Connection No Connection No Connection No Connection
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)
POWER (Hot/+)
No Connection
INPUT +
INPUT –
N.O.
No Connection
No Connection
No Connection
Lo SP Pot CW
Lo SP Pot W
SP Pots CCW
Hi SP Pot W
Hi SP Pot CW
INPUT +
No Connection
INPUT –
No Connection
N.O.
Lo SP Pot CW
Lo SP Pot W
SP Pots CCW
Hi SP Pot W
Hi SP Pot CW
INPUT +
Proc Xmtr +
INPUT –
Lo SP Xmtr +
N.O.
No Connection
Lo SP +
SP Common
Hi SP +
No Connection
INPUT +
No Connection
INPUT –
No Connection
Lo SP +
SP Common
Hi SP +
No Connection
INPUT +
Proc Xmtr +
INPUT –
COM * Hi Set No Connection
N.C. *
N.O.
No Connection
INPUT +
COM * Lo Set Proc Xmtr +
*Pins used for Option V
20-pin:
Hi Set = 19(+) - 18(–)
Lo Set = 15(+) - 14(–)
11-pin:
Hi Set = 7(+) - 8(–)
Lo Set = 10(+) - 11(–)
N.C. *
INPUT –
Lo SP Xmtr +
N.O.
No Connection
N.O.
Lo SP Xmtr +
N.O.
COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set
N.C. *
Hi SP Xmtr +
N.O.
COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set
N.C. *
Xmtr Common
N.C. *
No Connection
N.O.
N.C. *
Hi SP Xmtr +
N.O.
N.C. *
No Connection
N.O.
N.C. *
Hi SP Xmtr +
N.O.
N.C. *
No Connection
N.C. *
Xmtr Common
N.C. *
No Connection
N.C. *
Xmtr Common
Specifications subject to change without notice.
P. 4 / 4
ES-9801 Rev.6
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明