首页 |元器件品牌

MP1413-4-FY [MSYSTEM]

RTD INPUT LIMIT ALARM;
MP1413-4-FY
型号： MP1413-4-FY
厂家： M-SYSTEM    M-SYSTEM
描述：

RTD INPUT LIMIT ALARM

输入元件
文件： 总4页 (文件大小：88K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Limit Alarms M-PAC  
MODEL  
RTD INPUT LIMIT ALARM  
MP1400-1423  
MODEL & SUFFIX CODE SELECTION  
50  
(1.97)  
MP14❑❑–❑–❑/❑  
MODEL  
80  
(3.15)  
INPUT TYPE  
SET  
1
SPAN  
ZERO  
4 : RTD  
M•PAC  
LIMIT ALARM  
SET  
1
DEADBAND  
RELAY CONTACT OUTPUT  
SET  
2
DEADBAND  
0 : Single (Hi) trip, non-latching  
1 : Single (Hi) trip, latching  
2 : Dual (Hi/Lo) trip, non-latching  
SETPOINT CONTROL  
132  
(5.20)  
SET  
2
mm (inch)  
Functions & Features  
0 : Front-accessed three-turn screwdriver adjust.  
2 : Remote dial connections (total resistance 1k – 100kΩ)  
3 : DC programmable (0 – 1V)  
INPUT RTD (2- or 3-wire)  
4 : Pt 100Ω (DIN, IEC751)  
0 : Specify  
• Accepting 2- or 3-wire RTD inputs and providing  
relay contact closure(s) at a preset input level •  
Upscale burnout protection as standard •  
Downscale or no burnout optional • Single, latch-  
ing or dual setpoint • Failsafe operation available  
• Deadband adjustable from 1 to 100% • Indicator  
LED provided  
POWER INPUT  
F : 120V AC  
Typical Applications  
J : 240V AC  
R : 24V DC  
• Annunciator • Various alarm applications  
S : 12V DC  
OPTIONS  
GENERAL SPECIFICATIONS  
Construction: plug-in  
H : Latching operation for dual trip (142X only);  
Reset at power off (5 seconds min.)  
R : Reversed relay sense  
T : Transmitter output (0 – 1V DC)  
V : Relay drive voltage output  
X : Lo-trip sense for single trip; Lo/Lo for dual trip  
Y : Hi/Hi-trip sense for dual trip (142X only)  
Connection: M3.5 screw terminals on base socket  
Housing material: flame-resistant resin (black)  
Isolation: input to output to power  
(non-isolated between I/O with Option V)  
Zero/span adjustments: ±5% (front)  
Setpoint adjustments: front accessed three-turn  
screwdriver, remote dial potentiometer  
or DC input  
Deadband adjustments: front accessed single-turn  
screwdriver; 1 – 100%  
Front LEDs: red lights turn on at a tripped condition  
Burnout protection: upscale standard; downscale or  
no burnout optional  
ORDERING INFORMATION  
Specify code number and variables.  
•Code number (e.g. MP1400-4-F/T/V)  
•Temperature range (e.g. 0 – 100°C)  
Power ON timer: relays de-energized for approx. 2  
seconds after power is turned on.  
P. 1 / 4  
ES-9804 Rev.6  
MP1400-1423  
INPUT & OUTPUT  
INSTALLATION  
■INPUT: 2- or 3-wire Pt 100Ω  
Maximum leadwire resistance: 200Ω per wire (3-wire)  
Sensing current: 2mA  
Power input  
AC:  
DC:  
rating ±10%, 50/60 ±2 Hz, approx. 2VA  
rating ±10% (ripple 10% p-p max.)  
80mA at 24V, 160mA at 12V  
Temperature range  
Operating temperature: -5 to +60°C (23 to 140°F)  
Storage temperature: -20 to +85°C (-5 to +185°F)  
Operating humidity: 30 to 90% RH (non-condensing)  
Mounting: surface (DIN rail available for 11-pin base)  
Dimensions  
USABLE RANGE  
MIN. SPAN  
RTD  
°C  
Pt 100/DIN -200 to +600  
°F  
°C  
50  
°F  
-328 to +1112  
90  
■REMOTE SETPOINT INPUT  
MP14X2: potentiometer; any value of 1k – 100kΩ;  
excitation 4V  
11-pin base: W50×H80×D132 mm  
(1.97"×3.15"×5.20")  
See General Spec. Sheet Figure A.  
20-pin base: W80×H101×D136 mm  
(3.15"×3.98"×5.35")  
MP14X3: 0 – 1V DC  
■RELAY CONTACT OUTPUT  
•Single/Latching: isolated DPDT relay; de-energized  
at trip  
See General Spec. Sheet Figure B.  
Weight:  
400 g (0.88 lbs)  
•Dual:  
isolated SPDT relay; energized at trip  
PERFORMANCE in percentage of span  
Repeatability: ±0.2%  
Rating:  
Relay life  
120V AC @3A (cosø=1)  
30V DC @3A (resistive load)  
Temp. coefficient: ±0.05%/°C (±0.027%/°F)  
Response time: 100 milliseconds, typical  
Burnout response: 1 second  
Electrical: 105 cycles  
Mechanical: 107 cycles  
For maximum relay life with inductive  
Common mode rejection  
60 Hz: greater than 120 dB  
DC:  
greater than 140 dB  
loads, external protection is recommended.  
Line voltage effect: ±0.1% over voltage range  
Insulation resistance: ≥100MΩ with 500V DC  
Dielectric strength: 1000V AC @1 minute  
(input to output to power)  
■VOLTAGE OUTPUT (Option V): 24V DC average;  
Drives 1.2kΩ or greater coil impedance  
2000V AC @1 minute (output to ground)  
■TRANSMITTER OUTPUT (Option T): 0 – 1V DC;  
1mA max. (setpoint and process input)  
Specifications subject to change without notice.  
P. 2 / 4  
ES-9804 Rev.6  
BLOCK DIAGRAM  
■SINGLE / LATCHING OUTPUT  
•11-pin Base  
•20-pin Base  
Option V  
Option V  
Z
S
SP.SET DB  
Z
S
SP.SET DB  
6
7
6
7
13  
14  
15  
17  
18  
19  
13  
14  
15  
17  
18  
19  
N.O.  
COM.  
N.C.  
N.O.  
COM.  
N.C.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
+
–
4
5
1
2
3
AMP  
11  
AMP  
RTD HI  
RTD HI  
8
8
9
1
2
3
RTD LO  
RTD LO  
+
+
9
9
HOT /  
RTD  
N.O.  
COM.  
N.C.  
HOT /  
N.O.  
COM.  
N.C.  
COMP  
LEAD  
POWER  
10  
11  
10  
11  
POWER  
–
–
NEU /  
NEU /  
RTD  
COMP 20  
LEAD  
16  
4
LATCH RESET  
LATCH RESET  
MP141X  
+
8
MP14X2  
MP14X3  
SP  
MP14X0  
SP XMTR  
–
5
6
7
5
6
7
5
6
7
10  
12  
SP POT CCW  
SP POT W  
XMTR COMMON  
+
+
SP  
PROC XMTR  
SP POT CW  
Option T  
■DUAL OUTPUT  
•11-pin Base  
•20-pin Base  
Option V  
Option V  
Z
S
SP.SET DB  
Z
S
SP.SET DB  
HI  
LO  
6
7
6
7
13  
14  
15  
17  
18  
19  
13  
14  
15  
17  
18  
19  
N.O.  
COM.  
N.C.  
N.O.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
–
+
4
5
1
2
3
AMP  
11  
AMP  
RTD HI  
RTD HI  
COM.  
N.C.  
8
8
9
1
2
3
RTD LO  
RTD LO  
SP.SET DB  
SP.SET DB  
+
+
9
9
HOT /  
RTD  
N.O.  
COM.  
N.C.  
HOT /  
N.O.  
COM.  
N.C.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
–
+
COMP  
LEAD  
POWER  
10  
11  
10  
11  
POWER  
–
–
NEU /  
NEU /  
LO  
RTD  
HI  
COMP 20  
LEAD  
4
5
6
7
8
4
4
5
6
7
8
LO SP POT CW  
LO SP POT W  
SP POTS CCW  
HI SP POT W  
MP1423  
LO SP  
MP1420  
Option T  
+
+
5
6
7
8
10  
12  
16  
6
PROC XMTR  
LO SP XMTR  
HI SP XMTR  
SP  
COMMON  
+
+
+
HI SP  
HI SP POT CW  
MP1422  
XMTR COMMON  
P. 3 / 4  
ES-9804 Rev.6  
MP1400-1423  
TERMINAL ASSIGNMENT  
■SINGLE OUTPUT  
KEYS  
PIN  
MP1400  
MP1400  
MP1402  
MP1402  
MP1403  
MP1403  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
POWER (Hot/+)  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection  
POWER (Hot/+)  
No Connection  
RTD Comp Lead No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
RTD Hi  
RTD Lo  
N.O.  
COM *  
N.C. *  
N.O.  
No Connection  
No Connection  
No Connection  
No Connection  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
No Connection  
SP Pot CCW  
SP Pot W  
SP Pot CW  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
No Connection  
SP Pot CCW  
SP Pot W  
SP Pot CW  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
No Connection  
SP –  
SP +  
No Connection  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
No Connection  
SP –  
SP +  
No Connection  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
*Pins used for Option V  
20-pin = 14(+) - 15(–)  
11-pin = 7(+) - 8(–)  
COM  
N.C.  
COM  
N.C.  
COM  
N.C.  
N.C.  
N.C.  
N.C.  
RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead  
■LATCHING OUTPUT  
KEYS  
PIN  
MP1410  
MP1410  
MP1412  
MP1412  
MP1413  
MP1413  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
POWER (Hot/+)  
No Connection  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
POWER (Hot/+)  
No Connection  
Latch Reset  
No Connection  
No Connection  
No Connection  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
COM  
Latch Reset  
No Connection  
No Connection  
No Connection  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
COM  
Latch Reset  
SP Pot CCW  
SP Pot W  
SP Pot CW  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
COM  
Latch Reset  
SP Pot CCW  
SP Pot W  
SP Pot CW  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
COM  
Latch Reset  
SP –  
SP +  
No Connection  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
Latch Reset  
SP –  
SP +  
No Connection  
SP Xmtr +  
RTD Lo  
Xmtr Common  
RTD Hi  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
Latch Reset  
N.O.  
COM  
*Pins used for Option V  
20-pin = 14(+) - 15(–)  
COM  
N.C.  
N.C.  
N.C.  
N.C.  
N.C.  
N.C.  
RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead  
■DUAL OUTPUT  
KEYS  
PIN  
MP1420  
MP1420  
MP1422  
MP1422  
MP1423  
MP1423  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
POWER (Hot/+)  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection  
POWER (Hot/+)  
No Connection  
RTD Comp Lead No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
RTD Hi  
RTD Lo  
N.O.  
No Connection  
No Connection  
Xmtr Common  
Lo SP Pot CW  
Lo SP Pot W  
SP Pots CCW  
Lo SP Pot CW  
Lo SP Pot W  
SP Pots CCW/  
Xmtr Common  
Hi SP Pot W  
Hi SP Pot CW  
RTD Lo  
Proc Xmtr +  
RTD Hi  
Lo SP Xmtr +  
N.O.  
No Connection  
Lo SP +  
SP Common  
No Connection  
Lo SP +  
SP Common/  
Xmtr Common  
Hi SP +  
No Connection  
RTD Lo  
Proc Xmtr +  
RTD Hi  
7
8
9
COM * Hi Set No Connection  
Hi SP Pot W  
Hi SP Pot CW  
RTD Lo  
No Connection  
RTD Hi  
Hi SP +  
No Connection  
RTD Lo  
No Connection  
RTD Hi  
No Connection  
N.O.  
*Pins used for Option V  
20-pin:  
Hi Set = 19(+) - 18(–)  
Lo Set = 15(+) - 14(–)  
11-pin:  
Hi Set = 7(+) - 8(–)  
Lo Set = 10(+) - 11(–)  
N.C. *  
N.O.  
No Connection  
RTD Lo  
COM * Lo Set Proc Xmtr +  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
N.C. *  
RTD Hi  
Lo SP Xmtr +  
N.O.  
No Connection  
N.O.  
Lo SP Xmtr +  
N.O.  
COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set  
N.C. *  
Hi SP Xmtr +  
N.O.  
COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set  
N.C. * N.C. * N.C. * N.C. * N.C. *  
RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead RTD Comp Lead  
N.C. *  
No Connection  
N.O.  
N.C. *  
Hi SP Xmtr +  
N.O.  
N.C. *  
No Connection  
N.O.  
N.C. *  
Hi SP Xmtr +  
N.O.  
Specifications subject to change without notice.  
P. 4 / 4  
ES-9804 Rev.6  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明