首页 |元器件品牌

MP1820-0-0FT [MSYSTEM]

POTENTIOMETER INPUT LIMIT ALARM;
MP1820-0-0FT
型号： MP1820-0-0FT
厂家： M-SYSTEM    M-SYSTEM
描述：

POTENTIOMETER INPUT LIMIT ALARM

输入元件
文件： 总4页 (文件大小：87K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Limit Alarms M-PAC  
MODEL  
POTENTIOMETER INPUT LIMIT ALARM  
MP1800-1823  
MODEL & SUFFIX CODE SELECTION  
50  
(1.97)  
MP18❑❑–0–❑/❑  
MODEL  
INPUT TYPE  
80  
(3.15)  
SET  
1
SPAN  
ZERO  
8 : Potentiometer  
M•PAC  
LIMIT ALARM  
SET  
1
DEADBAND  
RELAY CONTACT OUTPUT  
0 : Single (Hi) trip, non-latching  
1 : Single (Hi) trip, latching  
2 : Dual (Hi/Lo) trip, non-latching  
SET  
2
DEADBAND  
132  
(5.20)  
SET  
2
mm (inch)  
SETPOINT CONTROL  
Functions & Features  
0 : Front-accessed three-turn screwdriver adjust.  
2 : Remote dial connections (total resistance 1k – 100kΩ)  
3 : DC programmable (0 – 1V)  
INPUT RESISTANCE  
0 : Total resistance 100Ω – 100kΩ  
POWER INPUT  
• Accepting potentiometer resistance and provid-  
ing relay contact closure(s) at a preset input level •  
Single, latching or dual setpoint • Failsafe opera-  
tion available • Deadband adjustable from 1 to 100%  
• Indicator LED provided  
Typical Applications  
F : 120V AC  
J : 240V AC  
• Annunciator • Various alarm applications  
R : 24V DC  
S : 12V DC  
OPTIONS  
GENERAL SPECIFICATIONS  
Construction: plug-in  
Connection: M3.5 screw terminals on base socket  
Housing material: flame-resistant resin (black)  
Isolation: input to output to power  
(non-isolated between I/O with Option V)  
Zero/span adjustments: multi-turn screwdriver  
(front); 0 – 50% of total resistance for  
zero; 50 – 100% for span  
Setpoint adjustments: front accessed three-turn  
screwdriver, remote dial potentiometer  
or DC input  
H : Latching operation for dual trip (182X only);  
Reset at power off (5 seconds min.)  
R : Reversed relay sense  
T : Transmitter output (0 – 1V DC)  
V : Relay drive voltage output  
X : Lo-trip sense for single trip; Lo/Lo for dual trip  
Y : Hi/Hi-trip sense for dual trip (182X only)  
ORDERING INFORMATION  
Specify code number. (e.g. MP1800-0-F/T/V)  
Deadband adjustments: front accessed single-turn  
screwdriver; 1 – 100%  
Front LEDs: red lights turn on at a tripped condition  
Power ON timer: relays de-energized for approx. 2  
seconds after power is turned on.  
P. 1 / 4  
ES-9807 Rev.6  
MP1800-1823  
INPUT & OUTPUT  
INSTALLATION  
■INPUT: potentiometer; 100Ω – 100kΩ  
Power input  
AC:  
DC:  
rating ±10%, 50/60 ±2 Hz, approx. 2VA  
rating ±10% (ripple 10% p-p max.)  
80mA at 24V, 160mA at 12V  
■REMOTE SETPOINT INPUT  
MP18X2: potentiometer; any value of 1k – 100kΩ;  
excitation 4V  
Operating temperature: -5 to +60°C (23 to 140°F)  
Storage temperature: -20 to +85°C (-5 to +185°F)  
Operating humidity: 30 to 90% RH (non-condensing)  
Mounting: surface (DIN rail available for 11-pin base)  
Dimensions  
MP18X3: 0 – 1V DC  
■RELAY CONTACT OUTPUT  
•Single/Latching: isolated DPDT relay; de-energized  
at trip  
11-pin base: W50×H80×D132 mm  
(1.97"×3.15"×5.20")  
•Dual:  
isolated SPDT relay; energized at trip  
See General Spec. Sheet Figure A.  
20-pin base: W80×H101×D136 mm  
(3.15"×3.98"×5.35")  
Rating:  
120V AC @3A (cosø=1)  
30V DC @3A (resistive load)  
Relay life  
See General Spec. Sheet Figure B.  
400 g (0.88 lbs)  
Electrical: 105 cycles  
Mechanical: 107 cycles  
For maximum relay life with inductive  
Weight:  
PERFORMANCE in percentage of span  
Repeatability: ±0.2%  
loads, external protection is recommended.  
Temp. coefficient: ±0.05%/°C (±0.027%/°F)  
Response time: 100 milliseconds, typical  
Common mode rejection  
■VOLTAGE OUTPUT (Option V): 24V DC average;  
Drives 1.2kΩ or greater coil impedance  
60 Hz: greater than 120 dB  
■TRANSMITTER OUTPUT (Option T): 0 – 1V DC;  
DC:  
greater than 140 dB  
1mA max. (setpoint and process input)  
Line voltage effect: ±0.1% over voltage range  
Insulation resistance: ≥100MΩ with 500V DC  
Dielectric strength: 1000V AC @1 minute  
(input to output to power)  
2000V AC @1 minute (output to ground)  
Specifications subject to change without notice.  
P. 2 / 4  
ES-9807 Rev.6  
BLOCK DIAGRAM  
■SINGLE / LATCHING OUTPUT  
•11-pin Base  
•20-pin Base  
Option V  
Option V  
Z
S
SP.SET DB  
Z
S
SP.SET DB  
6
7
6
7
13  
14  
15  
17  
18  
19  
13  
14  
15  
17  
18  
19  
N.O.  
COM.  
N.C.  
N.O.  
COM.  
N.C.  
MAX.  
MIN.  
MAX.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
+
–
4
5
1
2
3
AMP  
9
AMP  
INPUT  
INPUT  
8
8
11  
1
INPUT  
+
INPUT  
+
MIN.  
9
9
HOT /  
N.O.  
COM.  
N.C.  
HOT /  
N.O.  
COM.  
N.C.  
POWER  
10  
11  
10  
11  
2
POWER  
INPUT  
–
–
3
NEU /  
NEU /  
20  
16  
4
INPUT  
LATCH RESET  
LATCH RESET  
MP181X  
+
8
MP18X2  
MP18X3  
SP  
MP18X0  
SP XMTR  
–
5
6
7
5
6
7
5
6
7
10  
12  
SP POT CCW  
SP POT W  
XMTR COMMON  
+
+
SP  
PROC XMTR  
SP POT CW  
Option T  
■DUAL OUTPUT  
•11-pin Base  
•20-pin Base  
Option V  
Option V  
Z
S
SP.SET DB  
Z
S
SP.SET DB  
HI  
LO  
6
7
6
7
13  
14  
15  
17  
18  
19  
13  
14  
15  
17  
18  
19  
N.O.  
COM.  
N.C.  
N.O.  
MAX.  
MIN.  
MAX.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
–
+
4
5
1
2
3
AMP  
9
AMP  
INPUT  
INPUT  
COM.  
N.C.  
8
8
11  
1
INPUT  
+
INPUT  
+
MIN.  
SP.SET DB  
SP.SET DB  
9
9
HOT /  
N.O.  
COM.  
N.C.  
HOT /  
N.O.  
COM.  
N.C.  
COM-  
PAR  
COM-  
PAR  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
RELAY  
DRIVE  
+
–
–
+
POWER  
10  
11  
10  
11  
2
POWER  
INPUT  
–
–
3
NEU /  
NEU /  
LO  
HI  
20  
4
INPUT  
4
4
5
6
7
8
LO SP POT CW  
LO SP POT W  
SP POTS CCW  
HI SP POT W  
MP1823  
LO SP  
MP1820  
Option T  
+
+
5
5
6
7
8
10  
12  
16  
6
PROC XMTR  
LO SP XMTR  
HI SP XMTR  
SP  
COMMON  
+
6
+
+
7
HI SP  
8
HI SP POT CW  
MP1822  
XMTR COMMON  
P. 3 / 4  
ES-9807 Rev.6  
MP1800-1823  
TERMINAL ASSIGNMENT  
■SINGLE OUTPUT  
KEYS  
PIN  
MP1800  
MP1800  
MP1802  
MP1802  
MP1803  
MP1803  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
POWER (Hot/+)  
INPUT Max. CW  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
No Connection  
INPUT Min. CCW No Connection  
POWER (Hot/+)  
No Connection  
INPUT W  
No Connection  
SP Pot CCW  
SP Pot W  
SP Pot CW  
No Connection  
INPUT W  
No Connection  
SP Pot CCW  
SP Pot W  
SP Pot CW  
SP Xmtr +  
No Connection  
SP –  
SP +  
No Connection  
No Connection  
INPUT W  
No Connection  
SP –  
SP +  
No Connection  
SP Xmtr +  
INPUT W  
Xmtr Common  
N.O.  
No Connection  
No Connection  
SP Xmtr +  
INPUT W  
Xmtr Common  
COM *  
N.C. *  
N.O.  
COM  
N.C.  
*Pins used for Option V  
20-pin = 14(+) - 15(–)  
11-pin = 7(+) - 8(–)  
INPUT W  
Xmtr Common  
No Connection  
No Connection  
INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW  
No Connection  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
N.C.  
INPUT Max. CW  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
N.C.  
INPUT Max. CW  
No Connection  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
N.C.  
INPUT Max. CW  
Proc Xmtr +  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
N.C.  
INPUT Max. CW  
N.O.  
COM *  
N.C. *  
No Connection  
N.O.  
COM  
N.C.  
INPUT Max. CW  
■LATCHING OUTPUT  
KEYS  
PIN  
MP1810  
MP1810  
MP1812  
MP1812  
MP1813  
MP1813  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
7
8
9
POWER (Hot/+)  
No Connection  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
POWER (Hot/+)  
No Connection  
Latch Reset  
Latch Reset  
No Connection  
No Connection  
No Connection  
SP Xmtr +  
Latch Reset  
SP Pot CCW  
SP Pot W  
SP Pot CW  
No Connection  
INPUT W  
Latch Reset  
SP Pot CCW  
SP Pot W  
SP Pot CW  
SP Xmtr +  
INPUT W  
Latch Reset  
SP –  
SP +  
No Connection  
No Connection  
INPUT W  
No Connection  
Latch Reset  
SP –  
SP +  
No Connection  
SP Xmtr +  
INPUT W  
Xmtr Common  
No Connection  
No Connection  
No Connection  
No Connection  
INPUT W  
*Pins used for Option V  
20-pin = 14(+) - 15(–)  
INPUT W  
Xmtr Common  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
No Connection  
No Connection  
Xmtr Common  
INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW  
No Connection  
N.O.  
Proc Xmtr +  
N.O.  
No Connection  
N.O.  
Proc Xmtr +  
N.O.  
No Connection  
N.O.  
Proc Xmtr +  
N.O.  
COM *  
COM *  
COM *  
COM *  
COM *  
COM *  
N.C. *  
N.C. *  
N.C. *  
N.C. *  
N.C. *  
N.C. *  
Latch Reset  
N.O.  
Latch Reset  
N.O.  
Latch Reset  
N.O.  
Latch Reset  
N.O.  
Latch Reset  
N.O.  
Latch Reset  
N.O.  
COM  
COM  
COM  
COM  
COM  
COM  
N.C.  
N.C.  
N.C.  
N.C.  
N.C.  
N.C.  
INPUT Max. CW  
INPUT Max. CW  
INPUT Max. CW  
INPUT Max. CW  
INPUT Max. CW  
INPUT Max. CW  
■DUAL OUTPUT  
KEYS  
PIN  
MP1820  
MP1820  
MP1822  
MP1822  
MP1823  
MP1823  
N.O. = Normally Open  
COM = Common  
N.C. = Normally Closed  
Proc = Process  
Xmtr = Transmitter  
SP = Setpoint  
W = Wiper  
CW = Clockwise  
CCW = Counterclockwise  
w/Option T  
w/Option T  
w/Option T  
1
2
3
4
5
6
POWER (Hot/+)  
INPUT max. CW  
POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)  
No Connection No Connection No Connection No Connection  
POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)  
POWER (Hot/+)  
No Connection  
INPUT W  
INPUT Min. CCW No Connection  
N.O. Xmtr Common  
No Connection  
Lo SP Pot CW  
Lo SP Pot W  
SP Pots CCW  
Lo SP Pot CW  
Lo SP Pot W  
SP Pots CCW/  
Xmtr Common  
Hi SP Pot W  
Hi SP Pot CW  
INPUT W  
No Connection  
Lo SP +  
SP Common/  
No Connection  
Lo SP +  
SP Common/  
Xmtr Common  
Hi SP +  
No Connection  
INPUT W  
Proc Xmtr +  
7
8
9
COM * Hi Set No Connection  
Hi SP Pot W  
Hi SP Pot CW  
INPUT W  
Hi SP +  
No Connection  
INPUT W  
*Pins used for Option V  
20-pin:  
Hi Set = 19(+) - 18(–)  
Lo Set = 15(+) - 14(–)  
11-pin:  
Hi Set = 7(+) - 8(–)  
Lo Set = 10(+) - 11(–)  
N.C. *  
N.O.  
No Connection  
INPUT W  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
COM * Lo Set Proc Xmtr +  
N.C. *  
No Connection  
Proc Xmtr +  
No Connection  
INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW INPUT Min. CCW  
Lo SP Xmtr +  
N.O.  
No Connection  
N.O.  
Lo SP Xmtr +  
N.O.  
No Connection  
N.O.  
Lo SP Xmtr +  
N.O.  
COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set COM * Lo Set  
N.C. *  
Hi SP Xmtr +  
N.O.  
COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set COM * Hi Set  
N.C. *  
INPUT Max. CW  
N.C. *  
No Connection  
N.O.  
N.C. *  
Hi SP Xmtr +  
N.O.  
N.C. *  
No Connection  
N.O.  
N.C. *  
Hi SP Xmtr +  
N.O.  
N.C. *  
INPUT Max. CW  
N.C. *  
INPUT Max. CW  
N.C. *  
INPUT Max. CW  
N.C. *  
INPUT Max. CW  
Specifications subject to change without notice.  
P. 4 / 4  
ES-9807 Rev.6  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明