MSP4C2-148-0R [MSYSTEM]

Final Control Elements;
MSP4C2-148-0R
型号: MSP4C2-148-0R
厂家: M-SYSTEM    M-SYSTEM
描述:

Final Control Elements

文件: 总5页 (文件大小:183K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MODEL: MSP4C2  
Final Control Elements  
[3] OUTPUT STEM TYPE  
6: M6 female thread, 0.75 pitch  
8: M8 female thread, 1.0 pitch  
1: M10 female thread, 1.25 pitch  
D: M6 female thread, 1.0 pitch  
E: M8 female thread, 1.25 pitch  
F: M10 female thread, 1.5 pitch  
MINI-TOP ELECTRONIC ACTUATOR  
(linear type; CC-Link)  
Functions & Features  
• Small-size control valve actuator  
• Direct connection to CC-Link capable PLC and other  
devices on the same network  
• Easy wired  
CE MARKING  
• Uploading device information via CC-Link for maintenance  
purpose  
0: Without  
• 1/1000 high resolution  
POWER INPUT  
DC Power  
• Easy adjustment: electronic limiter at the valve open &  
closed positions  
R: 24 V DC  
• Overload protection  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
• Seal-spring incorporated for pressing direction  
PACKAGE INCLUDES...  
Typical Applications  
• Terminating resistor (110 Ω, 0.5 W)  
• For CP control valve in paper manufacturing  
• Fuel mixing control for combustion control system  
• Air conditioning for buildings and factories  
GENERAL SPECIFICATIONS  
Degree of protection: IP66  
Operation at a communication error: Extend, retract or stop  
Electrical connection: M3 screw terminals (torque 0.8 N·m)  
Screw terminal: Nickel-plated steel  
Transmission cable: Conforms to CC-Link Ver 1.10  
Housing material: Diecast aluminum  
(Cast aluminum for the terminal box; steel for the cover)  
Drive: Stepping motor  
Insulation class: E  
Position detection: Potentiometer  
Deadband: 0.1 – 1.9 % adjustable (factory set to 1.5 %)  
Restarting timer: 0 – 10 sec. adjustable  
(factory set to 1.5 sec.)  
MODEL: MSP4C2–[1][2][3]–0R  
Isolation: Housing or FE1 to communication to power  
Zero adjustment: 0 – 25 %  
ORDERING INFORMATION  
• Code number: MSP4C2-[1][2][3]-0R  
Specify a code from below for each of [1] through [3].  
(e.g. MSP4C2-271-0R)  
Span adjustment: 50 - 100 %  
Protective functions: Overload protection  
Status indicator LED: Red light blinks in 2 sec. intervals in  
normal operations; blinks in 0.5 sec. intervals when a  
foreign object is detected mechanically caught inside.  
Manual operating handle: Not available  
[1] STROKE  
1: 5 to 10 mm (.20” to .39”)  
2: 8 to 15 mm (.31” to .59”)  
CC-Link COMMUNICATION  
Protocol: CC-Link V1.10  
[2] OPERATION TIME, THRUST  
3: 5 sec. / 10 mm, 150 N  
Device type: Remote device station  
Station No. setting: Rotary switch; 1 – 64  
Required node: 1  
4: 9 sec. / 10 mm, 300 N  
7: 18 sec. / 10 mm, 700 N  
Baud rate setting: Rotary switch  
L RUN indicator: Red LED  
L ERR. indicator: Red LED  
MSP4C2 SPECIFICATIONS  
ES-4859 Rev.2 Page 1/5  
http://www.m-system.co.jp/  
MODEL: MSP4C2  
INSTALLATION  
Current consumption  
DC: Approx. 0.5 A  
Operating temperature: -5 to +55°C (23 to 131°F)  
Operating humidity: 30 to 85 %RH (non-condensing)  
Vibration: 0.5 G (4.9 m/s ) max.  
2
Mounting position: All directions  
Do not mount the actuator with its output stem or wiring  
conduit on the upside if the actuator is to be exposed to  
dripping water.  
Weight: 1.8 kg (4.0 lb)  
PERFORMANCE  
Resolution: 1/1000 or 0.015 mm, whichever is greater, with  
0.1 % deadband setting  
Insulation resistance: ≥ 100 MΩ with 100 V DC  
Dielectric strength: 100 V AC @ 1 minute  
(housing or FE1 to communication to power)  
MSP4C2 SPECIFICATIONS  
ES-4859 Rev.2 Page 2/5  
http://www.m-system.co.jp/  
MODEL: MSP4C2  
COMMUNICATIONS  
MASTER to SLAVE  
DATA TYPE ADDRESS FUNCTION  
DETAIL  
RY0  
RY1  
RY2  
RY3  
RY4  
RY5  
RY6  
RY7  
RY8  
RY9  
RYA  
RYB  
RYC  
RYD  
RYE  
RYF  
RWw0  
Forced Closed Position Input *1  
Forced Open Position Input *1  
0 : Disable 1 : Position = 0%  
0 : Disable 1 : Position = 100%  
Bit  
Enable Target Position Input  
0 : Disable 1 : Enable  
Reset Motor Deadlock Alarm  
Clear Motor Starting Counter  
Clear Motor Reversing Counter  
Motor deadlock alarm is cancelled when ‘1’ is set.  
Motor starting counter is reset to 0 when ‘1’ is set.  
Motor reversing counter is reset to 0 when ‘1’ is set.  
Clear Accumulated Running Distance Accumulated running distance is reset to 0 when ‘1’ is set.  
Target Position Input  
Signed, 0.01% increments (e.g. 100 = 1.00%)  
Valid only when Enable Target Position Input is enabled.  
Word  
RWw1  
RWw2  
RWw3  
*1. Valid regardless of the RY8 (Enable Target Position Input) status. Stopped when ‘1’ is set both at RY0 and RY1.  
SLAVE to MASTER  
DATA TYPE ADDRESS FUNCTION  
DETAIL  
RX0  
RX1  
RX2  
RX3  
RX4  
RX5  
RX6  
Bit  
RX7  
RX8  
Motor Deadlock Alarm  
Target Position Input Error  
System Error  
0 : Normal 1 : Overload or other deadlock alarm  
0 : Normal 1 : Out of range from -0.5 to +100.5%  
0 : Normal 1 : Memory or other system error  
0 : Remote (CC-Link) 1 : Manual  
RX9  
RXA  
RXB  
RXC  
RXD  
RXE  
RXF  
RWr0  
RWr1  
RWr2  
RWr3  
Control Status  
Position Output  
Signed, 0.01% increments (e.g. 100 = 1.00%)  
1 count per every 100 starting actions  
Word  
Motor Starting Counter *2  
Motor Reversing Counter *2  
Accumulated Running Distance (%)  
1 count per every 100 reversing actions  
1 count per running 100% distance every time  
2
*
*2. When the count reaches 65535, the value is held until it is reset.  
MSP4C2 SPECIFICATIONS  
ES-4859 Rev.2 Page 3/5  
http://www.m-system.co.jp/  
MODEL: MSP4C2  
EXTERNAL DIMENSIONS unit: mm (inch)  
42 (1.65)  
118 (4.65)  
[73 (2.87)]  
4–M5 10 (.39) deep  
[45(1.77)]  
Bottom View  
[22 (.86)]  
96 (3.78)  
Terminal Box  
M3  
Terminal Box Cover  
5.9 (.23)  
4G 1/2 (Cable soket)  
(See the stem size table)  
YOKE SURFACE  
0
12-0.25  
M
0
360.1 dia.  
66 (2.60) dia.  
*Max. 29 (1.14) for the stroke 5 – 10 m  
OUTPUT STEM HOLE SIZE M  
CODE  
DIA.  
M 6  
M 8  
M10  
M 6  
M 8  
M10  
PITCH DEPTH  
6
8
0.75  
1.0  
1
1.25  
1.0  
15  
D
E
F
1.25  
1.5  
MSP4C2 SPECIFICATIONS  
ES-4859 Rev.2 Page 4/5  
http://www.m-system.co.jp/  
MODEL: MSP4C2  
SCHEMATIC CIRCUITRY  
DIP SW  
INDICATOR LED  
Isolation  
STEPPING MOTOR  
DA  
Comm.  
Circuit  
Motor  
Driver  
M
DG  
DB  
To other CC-Link Devices  
CPU  
Monitoring  
SLD  
FE  
Z
S
Position  
Detector  
POT  
+
24V  
GND  
FE1  
Power  
Circuit  
Specifications are subject to change without notice.  
MSP4C2 SPECIFICATIONS  
ES-4859 Rev.2 Page 5/5  
http://www.m-system.co.jp/  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY