PMS-Z-B/Q [MSYSTEM]

Plug-in Signal Conditioners M-UNIT;


型号：	PMS-Z-B/Q
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners M-UNIT
文件：	总3页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: PMS

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Plug-in Signal Conditioners M-UNIT

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

POTENTIOMETER TRANSMITTER

(isolated)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

5W: -5 – +5 V DC (Load resistance 1000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Functions & Features

• Providing a DC output proportional to a

potentiometer or slidewire position input

• Constant voltage excitation allows use with pots with total

resistances from 100 Ω – 10 kΩ without affecting accuracy

• 50 % zero/span adjustments with minimal interaction

• Isolation up to 2000 V AC

• Fast response type available

• LCD meter

[2] POWER INPUT

AC Power

• High-density mounting

B: 100 V AC

Typical Applications

• Tank levels

C: 110 V AC

D: 115 V AC

• Positions

F: 120 V AC

G: 200 V AC (Not selectable with Option /UL)

H: 220 V AC (Not selectable with Option /UL)

J: 240 V AC (Not selectable with Option /UL)

DC Power

(1.97)

S: 12 V DC (Not selectable with Option /UL)

R: 24 V DC (Not selectable with Option /UL)

V: 48 V DC (Not selectable with Option /UL)

P: 110 V DC (Not selectable with Option /UL)

(3.15)

127

(5)

mm (inch)

[3] OPTIONS (multiple selections)

Input Signal Indicator

MODEL: PMS–[1]–[2][3]

blank: Without

/E: With (0.0 - 100.0 % display)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Standards & Approvals

ORDERING INFORMATION

• Code number: PMS-[1]-[2][3]

Specify a code from below for each of [1] through [3].

(e.g. PMS-A-B/E/K/Q)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

blank: Without UL

/UL: UL approval (Not selectable with /E)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

INPUT POTENTIOMETER

Total resistance 100 Ω – 10 kΩ

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

[1] OUTPUT

Current

/C02: Polyurethane coating

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

/C03: Rubber coating (UL not available)

TERMINAL SCREW MATERIAL

/S01: Stainless steel (UL not available)

PMS SPECIFICATIONS

ES-1352-E Rev.5 Page 1/3

http://www.m-system.co.jp/

MODEL: PMS

GENERAL SPECIFICATIONS

Construction: Plug-in

STANDARDS & APPROVALS

Approval:

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: 0 – 50 % of total resistance (front)

Span adjustment: 50 – 100 % of total resistance (front)

■ DISPLAY (Input indicator)

LCD digital display: 0.0 - 100.0 % (min. digit 0.1 %)

(No scaling)

INPUT SPECIFICATIONS

Minimum span: 50 % of total resistance

Excitation: 0.5 V DC

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; 5 mA for

negative voltage output; at ≥ 0.5 V

INSTALLATION

Power input

• AC: Operational voltage range: rating ±10 %,

50/60 ±2 Hz, approx. 2 VA

• DC: Operational voltage range: rating ±10 %, or 85 – 150

V for 110 V rating (ripple 10 % p-p max.)

approx. 2 W (80 mA at 24 V)

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 300 g (0.66 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Display accuracy: ±(0.1 % of FS + 1 digit)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

PMS SPECIFICATIONS

ES-1352-E Rev.5 Page 2/3

http://www.m-system.co.jp/

MODEL: PMS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–4.5 (.18) dia.

MTG HOLE

15 (.59) deep

8–M3.5

SCREW

50 (1.97)

107 (4.21)

127 (5)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

POTENTIOMETER

max.

Excitation Volt.

Generator

Isolation

Low Drift

Amplifier

Output

Driver

OUTPUT

POWER

–

min.

U(+)

V(–)

Base Socket

* Option /E

Specifications are subject to change without notice.

PMS SPECIFICATIONS

ES-1352-E Rev.5 Page 3/3

http://www.m-system.co.jp/

相关型号：