R3-BS10 [MSYSTEM]

Remote I/O R3 Series INSTALLATION BASE;


型号：	R3-BS10
厂家：	M-SYSTEM
描述：	Remote I/O R3 Series INSTALLATION BASE
文件：	总5页 (文件大小：161K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R3-BS

Remote I/O R3 Series

INSTALLATION BASE

GENERAL SPECIFICATIONS

Capacity:

R3-BS02: 2 modules

R3-BS02P: 2 modules

R3-BS04: 4 modules

R3-BS06: 6 modules

R3-BS08: 8 modules

R3-BS10: 10 modules

R3-BS12: 12 modules

R3-BS14: 14 modules

R3-BS16: 16 modules

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail

Weight (No remote I/O module mounted)

R3-BS02: 100 g (0.22 lb)

MODEL: R3–BS[1][2]

ORDERING INFORMATION

• Code number: R3-BS[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R3-BS10/CE/Q)

R3-BS02P: 100 g (0.22 lb)

R3-BS04: 150 g (0.33 lb)

• Specify the specification for option code /Q

(e.g. /C01)

R3-BS06: 200 g (0.44 lb)

R3-BS08: 250 g (0.55 lb)

R3-BS10: 350 g (0.77 lb)

[1] NUMBER OF SLOTS

02: 2 slots

R3-BS12: 400 g (0.88 lb)

R3-BS14: 450 g (0.99 lb)

02P: 2 slots (R3-NP1 only)

04: 4 slots

R3-BS16: 500 g (1.10 lb)

06: 6 slots

STANDARDS & APPROVALS

EU conformity:

08: 8 slots

10: 10 slots

EMC Directive

12: 12 slots

EMI EN 61000-6-4

14: 14 slots

EMS EN 61000-6-2

RoHS Directive

16: 16 slots

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Only solder side of the main PWB is coated.

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

R3-BS SPECIFICATIONS

ES-8356 Rev.13 Page 1/5

https://www.m-system.co.jp/

MODEL: R3-BS

EXTERNAL VIEW

Mount the I/O Modules from the left end (I/O 1) to the right in order that the Network Module assigns data areas from I/O 1.

Be sure to install a network module on the right side of the I/O modules. For a power supply module, be sure to install in the

right end slot for heat dissipation. In the case of redundant power supply, consecutively install them in the right end slot.

I/O 1 I/O 2

I/O n

EXTERNAL DIMENSIONS unit: mm [inch]

■R3-BS02, BS02P

56 [2.20]

30 [1.18]

4 [.16]

5 [.20]

26.5

4–4.5 [.28] dia. MTG HOLE

2 [.08] deep

[1.04]

DIN RAIL

(35 mm wide)

16.7

[.66]

120 [4.72]

R3-BS SPECIFICATIONS

ES-8356 Rev.13 Page 2/5

https://www.m-system.co.jp/

MODEL: R3-BS

■R3-BS04, BS06, BS08, BS10, BS12, BS14, BS16

4 [.16]

5 [.20]

26.5

30 [1.18] 26 [1.02] 30 [1.18]

n– 4.5 [.28] dia. MTG HOLE

2 [.08] deep

[1.04]

DIN RAIL

(35 mm wide)

16.7

[.66]

120 [4.72]

*n = Number of slots × 2

SIZE

MODEL

R3-BS04

112 [4.40]

168 [6.61]

224 [8.82]

280 [11.02]

336 [13.23]

392 [15.43]

448 [17.64]

R3-BS06

R3-BS08

R3-BS10

R3-BS12

R3-BS14

R3-BS16

R3-BS SPECIFICATIONS

ES-8356 Rev.13 Page 3/5

https://www.m-system.co.jp/

MODEL: R3-BS

MOUNTING REQUIREMENTS unit: mm [inch]

■ MOUNTING DIRECTION

The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,

may shorten the product’s life expectation or deteriorate its performance.

DOWN

■ VENTILATION & MAINTENANCE SPACE

Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)

Maintain sufficient ventilation space. Do not mount the unit

directly above devices which radiate great heat such as

heaters, transformers or resistors.

Maintenance space is also required above and below the unit.

R3-BS

50 [2]

Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)

R3-BS SPECIFICATIONS

ES-8356 Rev.13 Page 4/5

https://www.m-system.co.jp/

MODEL: R3-BS

■ R3-BS02, BS02P

■ R3-BS04, BS06, BS08, BS10, BS12, BS14, BS16

[1.18]

[1.18] [1.02] [1.18]

4–M4

n–M4

*n = Number of slots × 2

Specifications are subject to change without notice.

R3-BS SPECIFICATIONS

ES-8356 Rev.13 Page 5/5

https://www.m-system.co.jp/

相关型号：